who knows stuff?

[mikey]

latest addition to my collection of broken bikes is a

91 NSR 250R MC21 (derestricted), had it for a day before it heat seized on me on the way to manfield on sunday.

top chamber is fucked / piston got a wee hole in it and the bottom piston is moving around a bit to much.

so does any body know ......

if a mc28 engine will bolt in and/or if there will be any problems with electrics (swipe card vs key)

if the engine will not bolt right in and/or there are ignition problems with a newer engine, will the barrels, pistons, rings be compatible with the MC21 bottom end

if anyone has a got a motor (any nsr model) sitting in there garage for me, with good barrels

cheers

mike

[Hitcher]

You're having a bad run with bikes at the moment, he said in a blindingly obvious manner.

[WINJA]

NAH MATE YOU WANNA PUT A XR650 MOTOR IN THERE

[White trash]

Mikey, find yourself a friend (easier said than done) that works in a Honda dealership. Our mate Sparky Bills'd be a goodun. Get them to check the part numbers between the different years for barrels, pistons and rings. This'll obviously tell you what will fit and what wont.

[madboy]

How about you quit working for Aunty Helen and save up for a really flash bike to trash next? (pt) :wait:

[nsrpaul]

honda dealer won;t tell ya shit , there is nothin in english for the nsr , barrels will swap but port timing is little bit crappy on mc28 , fuck all in it tho , whole motor never tried it , shud work , will need to swap all the lectrics with the 21 stuff tho , flywheel as well, cause the 28 has crappy timing any probs you can give me a call on 03 5470674 for advice , loads of experrience on 21's , not much on 28's cause they are crappy, but any nsr is better than anything else , specialy rgvs

[nsrpaul]

nb - my honda dealer told me honda never made two stroke sports bikes , even when I rode to the dealer on the nsr :oi-grr:

[gav]

nb - my honda dealer told me honda never made two stroke sports bikes , even when I rode to the dealer on the nsr :oi-grr:
FFS, who was that? Morley M/C and Marine?

[inlinefour]

and they all say that Honda never made a good 2 stroker. Dunno, was almost interested in a NSR a bit back. Mikey was it the one at North Shore, picture below?

[FROSTY]

But honda dont build 2 stroke sports bikes --they make hand grenades :devil2:

[mikey]

and they all say that Honda never made a good 2 stroker. Dunno, was almost interested in a NSR a bit back. Mikey was it the one at North Shore, picture below?nah mines a 91 with fiber glass fairings, thats a older one i think.


honda dealer won;t tell ya shit , there is nothin in english for the nsr , barrels will swap but port timing is little bit crappy on mc28 , fuck all in it tho , whole motor never tried it , shud work , will need to swap all the lectrics with the 21 stuff tho , flywheel as well, cause the 28 has crappy timing any probs you can give me a call on 03 5470674 for advice , loads of experrience on 21's , not much on 28's cause they are crappy, but any nsr is better than anything else , specialy rgvs
motormarts advice is to talk to someone who races them, bit better than honda dont make two strokes,

rung around most wreckers in north island an none got ANY engines, so i think i will have to do the 28,
one problem im not sure about is the derestrictor, my 21 is derestricted and cant find any manuals on the web to show what wiring diagrams.
would the way to do it be rip the chambers an pistons out of new engine an put in old engine?

[nsrpaul]

But honda dont build 2 stroke sports bikes --they make hand grenades :devil2:
lies , lies I tell u

[nsrpaul]

FFS, who was that? Morley M/C and Marine?
prob shouldn't say , but I'm in nelson , there is only one honda dealer

[nsrpaul]

motormarts advice is to talk to someone who races them, bit better than honda dont make two strokes,

wait , thats right , I race one

[loosebruce]

Fuck Mikey, totally forgot about Rick

Flick him an email rick@rpracing.co.nz , if anyone in NZ can help, Rick well, he knows his shit when it comes to 2 strokes.

Heres his site for those that dont know www.rpracing.co.nz he's built some nice bikes.

[WINJA]

Fuck Mikey, totally forgot about Rick

Flick him an email rick@rpracing.co.nz , if anyone in NZ can help, Rick well, he knows his shit when it comes to 2 strokes.

Heres his site for those that dont know www.rpracing.co.nz he's built some nice bikes.
TRICK RICK PORTER WITH THAT HOT GIRL FRIEND

[gav]

prob shouldn't say , but I'm in nelson , there is only one honda dealer
If it had TRX on the side cover they'd be interested...

[nsrpaul]

If it had TRX on the side cover they'd be interested...
even then their service is crap , and their parts have gst put on twice , my local yamaha dealer does honda parts at 12.5% less every time

[mikey]

like any cool cunt, jesus etc, im resurrecting this thread.


does anyone know (FOR SURE) as in they have done it themselkves or just real smart an stuff if,

a mc28 engine will bolt into my 21 frame and/or if there will be any problems with electrics (swipe card vs key)

[nsrpaul]

like any cool cunt , I have a nsr
there will be heaps of probs electrics wise , they are not interchangable, best to use the mc21 electrics , the motor should be ok but change the flywheel and stuff to the 21 gear , prob best to use 21 carbs to , as they are different and not sure if the throtle position sensor is the same
whats more will make more power with mc21 electrics cheaper

[curious george]

As a smart cunt, I reccommend you fix the old engine.
2x Pro-X pistons and rings, get an engineer to tidy the heads, if you have the cash, replate the barrells, what's the problem?

[SimJen]

Definately call Ricky Porter, he rebuilt mine a few times (sold it though). My old website had info etc (www.nsr250sp.com) try my new site for info: www.simjen.com
Rick knows his shit for sure, a thoroughly good bloke who won't mess you around.
Often gets spares etc too.