Another Wellington K100 bike mod/custom

[madmal64]

Must be something in the water but Im another doing a K100 custom in Wellington.
Taking a slightly different path to Mossy but still similar in lots of ways.
My donor bike cost me $0.00! :Punk:
It has been lying in a shed for the last 4 plus years after being crashed by a previous owner and is looking rather sad and neglected. Picked it up and took it to my workshop, dusted off the cobwebs etc, put a jumper lead to the battery terminal and she fired up! She ran really smooth but I didn't want to give it a good run due to old fuel and possible crap in the tank etc, but at least I know its a runner.
Mine was/is also and RS but the fairings were non existent and the dash was full of water. I mean FULL of water. Slightly bent RH fork, LH footpeg mount and gear lever broken, cracked front disk and dented front rim. But what do you expect for free?
So far I have purchased

New Front Rim
Solo Seat and Tail piece
New Rear Brake Pedal


The seat in interesting. It bolts straight on and was made in Japan by a company called Motoco in the 80's. Not 100% set on it but its different to the usual cafe style seat.
To date I have

Stripped ot the tail and exhaust pipe
Removed the front wheel & forks
Removed the huge foot peg brackets


Its slowing taking shape as I'm limited with time right now. That will change shortly but Im in no rush really.
Will try to keep this thread up to date with what I'm up to.

[mossy1200]

Must be something in the water but Im another doing a K100 custom in Wellington.
Taking a slightly different path to Mossy but still similar in lots of ways.
My donor bike cost me $0.00! :Punk:
It has been lying in a shed for the last 4 plus years after being crashed by a previous owner and is looking rather sad and neglected. Picked it up and took it to my workshop, dusted off the cobwebs etc, put a jumper lead to the battery terminal and she fired up! She ran really smooth but I didn't want to give it a good run due to old fuel and possible crap in the tank etc, but at least I know its a runner.
Mine was/is also and RS but the fairings were non existent and the dash was full of water. I mean FULL of water. Slightly bent RH fork, LH footpeg mount and gear lever broken, cracked front disk and dented front rim. But what do you expect for free?
So far I have purchased

New Front Rim
Solo Seat and Tail piece
New Rear Brake Pedal


The seat in interesting. It bolts straight on and was made in Japan by a company called Motoco in the 80's. Not 100% set on it but its different to the usual cafe style seat.
To date I have

Stripped ot the tail and exhaust pipe
Removed the front wheel & forks
Removed the huge foot peg brackets


Its slowing taking shape as I'm limited with time right now. That will change shortly but Im in no rush really.
Will try to keep this thread up to date with what I'm up to.

Theres a guy on K100 forum that has made a speedo conversion board to add relays that run the neutral start systems etc.
Very cheap $25 USD.
You will want it or make it unless you want to have to engage clutch to start the bike.

http://www.k100-forum.com/t8674-aftermarket-gear-indicator-neutral-indicator-board-3-circuit-fuse-block

[madmal64]

Theres a guy on K100 forum that has made a speedo conversion board to add relays that run the neutral start systems etc.
Very cheap $25 USD.
You will want it or make it unless you want to have to engage clutch to start the bike.

http://www.k100-forum.com/t8674-aftermarket-gear-indicator-neutral-indicator-board-3-circuit-fuse-block

Thanks for that.
Im looking at an Acewell Speedo and like the look of this one. The price seems reasonable and the report on the seem good. Will have to run a wheel sensor and not run the gearbox sensor but from what I have heard that's not an issue. I will look into this relay. You grabbing one Mossy?
http://www.acewell.co.uk/product_images/1253635551_original_4.jpg

[JATZ]

Thanks for that....
I will look into this relay. You grabbing one Mossy?

If'n you are, I could be interested. I wonder if he'd do a bulk buy deal ??

I have one of these to install, when I get the courage up to tackle the wiring :blink:

http://i412.photobucket.com/albums/pp201/ztaj/The%20Brick/Speedo_zps107036cd.jpg

[mossy1200]

Thanks for that.
Im looking at an Acewell Speedo and like the look of this one. The price seems reasonable and the report on the seem good. Will have to run a wheel sensor and not run the gearbox sensor but from what I have heard that's not an issue. I will look into this relay. You grabbing one Mossy?


I am most likely to get the same acewell speedo.
There is a very low profile electronic speedo I like but I think it was 450pounds.
Yes hes about to start making another batch.
Without it some functions wont work as the k100 speedo contains relays that run a few items.
The main one is the neutral position relay. The bike will start without it but only when the clutch switch is engaged so even when bike is in neutral you would need pull clutch in.

[mossy1200]

If'n you are, I could be interested. I wonder if he'd do a bulk buy deal ??

I have one of these to install, when I get the courage up to tackle the wiring :blink:


I don't think he will go lower than the $25 Canadian but combined freight would help.

[madmal64]

Started to strip back the tank today. Was gutted to find so much bondi in it. Was looking at clear coating the alloy but by the look of it that will have to change.
Anyway new drag bars, bar end mirrors, some carbon fibre bits and headlight should arrive this week so that will cheer me up.

[BMWST?]

Started to strip back the tank today. Was gutted to find so much bondi in it. Was looking at clear coating the alloy but by the look of it that will have to change.
Anyway new drag bars, bar end mirrors, some carbon fibre bits and headlight should arrive this week so that will cheer me up.

i think all the k 100 tanks will be the same maybe hunt for another one?

[mossy1200]

I just sanded through it all.

And now there is a good chance ill be painting it since my seat unit will need painted.

Malcolm is taking orders on the 4 into 1 collectors in stainless now if you want one also.

[madmal64]

Malcolm is taking orders on the 4 into 1 collectors in stainless now if you want one also.

Yep! Approx how much is he wanting for them?

[mossy1200]

Yep! Approx how much is he wanting for them?

160
malcdel@xtra@xtra.co.nz

The sizing model is on my thread. Its with oversized header pipes and the final items will have the same pattern as the pipes formation which isn't square. Hes starting mine now but can do a few at the same time if you email him.

[madmal64]

Nice to have a few parts start to come in!
Drag bars and bar end mirrors arrived today.
Got the headlight & brackets on the way as well.

[98tls]

Great thread guys,following progress with interest.

[Arronduke]

I'm liking this thread also... K100 who would have thought but its cool.
Gee it seem everyone is building one :yes:

But seriously nice to see something different to an R.

Free... really! bastard!

bring on the K's