Log in

View Full Version : Assorted parts, rims and other



kiwi cowboy
28th September 2014, 12:03
302523302524302526302527These are rims I have accumulated and other parts off my road fzr when I turned it into a pre89.

One 2.5x17 off a gsxr400,impulse,some gsx600 in good nick with twin discs.
One 3.0x17 off a gsx750f with twin discs still look good but are close to 4ml limit but still good for racing.
one 3.5x17 off a gsx750f,gs500 with coosh drive and 500 carrier but no disc.
Pair of good 300ml discs and new pads.
other parts off the fzr are.
set of indicators in good nick,
front and rear lights,
left switch block (right may also come available if I get my arse into gear and put a starter switch on the dash),
side rear farings that are in average condition that I had started fixing up but went with a race tail.
Stock muffler that has had 6 holes drilled in the rear of it below the exit hole (not by me) that were bunged up that I have removed the gunk other wise in good nick.

Reasonable offers on this stuff but no bags of chips thanks alkze.:laugh:

husaberg
28th September 2014, 13:14
These are rims I have accumulated and other parts off my road fzr when I turned it into a pre89.

One 2.5x17 off a gsxr400,impulse,some gsx600 in good nick with twin discs.
One 3.0x17 off a gsx750f with twin discs still look good but are close to 4ml limit but still good for racing.
one 3.5x17 off a gsx750f,gs500 with coosh drive and 500 carrier but no disc.
Pair of good 300ml discs and new pads.
other parts off the fzr are.
set of indicators in good nick,
front and rear lights,
left switch block (right may also come available if I get my arse into gear and put a starter switch on the dash),
side rear farings that are in average condition that I had started fixing up but went with a race tail.
Stock muffler that has had 6 holes drilled in the rear of it below the exit hole (not by me) that were bunged up that I have removed the gunk other wise in good nick.

Reasonable offers on this stuff but no bags of chips thanks alkze.:laugh:

302524
Are the disks Ducati Yamaha pattern?
guessing the pads are Suzuki
what sort of price for the disks?

kiwi cowboy
28th September 2014, 13:56
302524
Are the disks Ducati Yamaha pattern?
guessing the pads are Suzuki
what sort of price for the disks?

Yes I bought them to fit to my fzr rim but there 320ml.
there the right fit bolt wise and do fit some ducati's.
200 would get you the discs as long as they don't sell on t me for 250 with pads.
not sure what pads fit but I got them from the ducati dealer I got the discs off at the same time but they look like they fit the likes of the tockio calipers with the single pin.
there ebc double-H sintered code FA145HH

husaberg
28th September 2014, 13:59
Yes I bought them to fit to my fzr rim but there 320ml but there the right fit bolt wise and do fit some ducati's.
200 would get you the discs as long as they don't sell on t me for 250 with pads.

fair price ...... but out of my price range for what I want them for.

kiwi cowboy
28th September 2014, 14:04
fair price ...... but out of my price range for what I want them for.

What ya offering will keep it in mind?

husaberg
28th September 2014, 14:06
What ya offering will keep it in mind?

More than axel:laugh:

kiwi cowboy
28th September 2014, 14:16
More than axel:laugh:

Ya not one of these young fullas are ya that has there pants down round the knees that cant reach the money in the bottom of there pockets???:2thumbsup

husaberg
28th September 2014, 14:19
Ya not one of these young fullas are ya that has there pants down round the knees that cant reach the money in the bottom of there pockets???:2thumbsup

No just a tight ass,for a project that will never be finished.

Buddha#81
28th September 2014, 19:06
Keen on the impulse rim, how much?

kiwi cowboy
28th September 2014, 22:10
Keen on the impulse rim, how much?

what ya offering:whistle:$130 plus postage

kiwi cowboy
9th October 2014, 17:14
302523302524302526302527These are rims I have accumulated and other parts off my road fzr when I turned it into a pre89.

One 2.5x17 off a gsxr400,impulse,some gsx600 in good nick with twin discs.
One 3.0x17 off a gsx750f with twin discs still look good but are close to 4ml limit but still good for racing.
one 3.5x17 off a gsx750f,gs500 with coosh drive and 500 carrier but no disc.
Pair of good 300ml discs and new pads.
other parts off the fzr are.
set of indicators in good nick,
front and rear lights,
left switch block (right may also come available if I get my arse into gear and put a starter switch on the dash),
side rear farings that are in average condition that I had started fixing up but went with a race tail.
Stock muffler that has had 6 holes drilled in the rear of it below the exit hole (not by me) that were bunged up that I have removed the gunk other wise in good nick.

Reasonable offers on this stuff but no bags of chips thanks alkze.:laugh:


bumpity bump

kiwi cowboy
18th October 2014, 19:17
bump bump bump some one must be building buckets .:eek5:

husaberg
18th October 2014, 19:41
bump bump bump some one must be building buckets .:eek5:

Bucket builders are renowned for there tightness...........:rolleyes::msn-wink::whistle::)

kiwi cowboy
18th October 2014, 22:11
Bucket builders are renowned for there tightness...........:rolleyes::msn-wink::whistle::)

:brick::brick::brick:yeeeeeeeeeeerrrrrrrrrrp!:whis tle::whistle::whistle:nuff said.:whistle::whistle::zzzz:

unstuck
19th October 2014, 06:33
Tight assed like your boyfriend the ram.:devil2:

kiwi cowboy
18th January 2015, 12:25
Bump Bump anyone wanting rims or other stuff. Also have a 120-70-17 bt016pro hardly worn too.
Resonable offers.