PDA

View Full Version : Tyre puncture question



mathornet
9th October 2014, 15:09
Hey guys. This unfortunate thing happened to me today.303168
I found a huge as blade sticking out of my tire while on the way to Uni. Took it off and it left this cut.
I haven't noticed any air loss after an hour but I'm very worried that it could get worst. Should i just bring it to the shops to be repaired?
Is it even repairable??!?

Akzle
9th October 2014, 15:14
that long? no.
get a tube. and/or vulcanising glu.

mathornet
9th October 2014, 15:18
that long? no.
get a tube. and/or vulcanising glu.

But that requires working from the inside of the tire?
What kind of tube?

Akzle
9th October 2014, 15:46
But that requires working from the inside of the tire?
What kind of tube?

no shit. a shroom comes from the inside too...

a tube that fits.

skippa1
9th October 2014, 16:46
Do what everyone on facebook is telling you to do

slofox
9th October 2014, 16:57
Don't fuck around with tyres - take it to the shop for advice at the least.

FJRider
9th October 2014, 17:29
Ignore it .. what could possibly go wrong .. ??? :blank:

bogan
9th October 2014, 17:40
Do a real big skid au, it'll weld the outer layer up all goodor not at allprobs the latermaybe take it to a shopjust to be safe/not retarded

Flip
13th October 2014, 20:15
Stick a screwdriver in it and give it a wee twist. If you see coards its fucked, if its just rubber than its OK.

BlackSheepLogic
14th October 2014, 16:06
It happens I replace the tyre. Don't want to deal with tyre issues when riding if I can avoid it.


Stick a screwdriver in it and give it a wee twist. If you see coards its fucked, if its just rubber than its OK.

nodrog
14th October 2014, 16:44
It happens I replace the tyre. Don't want to deal with tyre issues when riding if I can avoid it.

cool. can I have your old tyres?

BlackSheepLogic
15th October 2014, 09:46
cool. can I have your old tyres?

I left a set of BT015's at the shop with only 600 miles on them, just did not want tyres in the garage, didn't think to check if someone wanted them.

nodrog
15th October 2014, 12:06
I left a set of BT015's at the shop with only 600 miles on them, just did not want tyres in the garage, didn't think to check if someone wanted them.

Are you Kim dot com?

Ender EnZed
15th October 2014, 15:42
Do a real big skid au, it'll weld the outer layer up all goodor not at allprobs the latermaybe take it to a shopjust to be safe/not retarded

I didn't read the small letters but this seems like the best option.