Flat slide carb identification?

[Bwarp]

Hi all,

I recently acquired a DRZ400SM, and it had an aftermarket Keihin Flatslide CR carb on it.

I'm trying to identify it a little bit further so i can list it for sale, as I had to return bike to LAMS approved for insurance purposes.

I've measured the diameter of it at 39mm which seems right as a mod regularly done by other DRZ owners.

Seems to have all throttle cables attached. has a electronic plug attached (maybe TPS??), and also has this snorkel thing with it too.

http://iforce.co.nz/i/s3mki0th.sda.jpg (http://www.iforce.co.nz/View.aspx?i=s3mki0th.sda.jpg)
http://iforce.co.nz/i/csqhtg1e.yrh.jpg (http://www.iforce.co.nz/View.aspx?i=csqhtg1e.yrh.jpg)
http://iforce.co.nz/i/uf3vg5vt.z0s.jpg (http://www.iforce.co.nz/View.aspx?i=uf3vg5vt.z0s.jpg)
http://iforce.co.nz/i/plesvrkc.elc.jpg (http://www.iforce.co.nz/View.aspx?i=plesvrkc.elc.jpg)
http://iforce.co.nz/i/h1uxlq2k.dgj.jpg (http://www.iforce.co.nz/View.aspx?i=h1uxlq2k.dgj.jpg)
http://iforce.co.nz/i/o0nijof0.4p4.jpg (http://www.iforce.co.nz/View.aspx?i=o0nijof0.4p4.jpg)


There's a part number on the side that says: 29F 8UB04 and i've searched the googles using that but come up with nothing.

Any ideas what I should say about it when i list it for sale? I'm having trouble identifying it.

Alternatively, if someones wants to buy it, flick me a reasonable offer.

Cheers,
L

[mossy1200]

I would be in denial that I had even seen it and it would still be on the bike.
How is a learner expected to know the previous owner changed the carb anyway?

[spanner spinner]

This is the standard drz400 carb off the dirt version see http://www.drzparts.com/2011/01/drz400-carb-models-and-differences-fcr-cv/ for more info, yours standard is meant to be a 36mm cv type carb, and yes the sensor on the end of the throttle shaft is a throttle position sensor.

[Yow Ling]

FCR 39 is my guess

[Bwarp]

cool, thanks for the help guys.

Is it worth anything? worth selling at all?

or better off just hanging onto it and chucking it back on when i get bored?

[husaberg]

Hi all,

I recently acquired a DRZ400SM, and it had an aftermarket Keihin Flatslide CR carb on it.

I'm trying to identify it a little bit further so i can list it for sale, as I had to return bike to LAMS approved for insurance purposes.

I've measured the diameter of it at 39mm which seems right as a mod regularly done by other DRZ owners.

Seems to have all throttle cables attached. has a electronic plug attached (maybe TPS??), and also has this snorkel thing with it too.

http://iforce.co.nz/i/s3mki0th.sda.jpg (http://www.iforce.co.nz/View.aspx?i=s3mki0th.sda.jpg)
http://iforce.co.nz/i/csqhtg1e.yrh.jpg (http://www.iforce.co.nz/View.aspx?i=csqhtg1e.yrh.jpg)
http://iforce.co.nz/i/uf3vg5vt.z0s.jpg (http://www.iforce.co.nz/View.aspx?i=uf3vg5vt.z0s.jpg)
http://iforce.co.nz/i/plesvrkc.elc.jpg (http://www.iforce.co.nz/View.aspx?i=plesvrkc.elc.jpg)
http://iforce.co.nz/i/h1uxlq2k.dgj.jpg (http://www.iforce.co.nz/View.aspx?i=h1uxlq2k.dgj.jpg)
http://iforce.co.nz/i/o0nijof0.4p4.jpg (http://www.iforce.co.nz/View.aspx?i=o0nijof0.4p4.jpg)


There's a part number on the side that says: 29F 8UB04 and i've searched the googles using that but come up with nothing.

Any ideas what I should say about it when i list it for sale? I'm having trouble identifying it.

Alternatively, if someones wants to buy it, flick me a reasonable offer.

Cheers,
L


FCR 39 is my guess
I am with Yow likely off a 250f MX bike or it could be a Sudco one.... have a look on their Website
plus if you are really keen try looking a parts Fiche for a one of the Big 5 on a 250F