New School Classic Project [Archive]

The Lone Rider

11th November 2014, 21:15

Starting with this

https://scontent-b-sjc.xx.fbcdn.net/hphotos-xpa1/t31.0-8/1932508_560934097335913_40519490_o.jpg
https://scontent-a-sjc.xx.fbcdn.net/hphotos-xap1/t31.0-8/1911268_560470694048920_709243764_o.jpg

First thing's first, needs new chain and sprockets

https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-xpf1/t31.0-8/1614026_596046433824679_2527633815200396354_o.jpg

The Lone Rider

11th November 2014, 21:17

Playing around with an idea for a seat pan

https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-xpf1/t31.0-8/1795214_578954272200562_1584650595194114355_o.jpg

Rudra

12th November 2014, 13:04

I'm currently working on a VN800B as well.
Plenty of inspiration here, http://www.chopcult.com/forum/showthread.php?t=5388

mossy1200

12th November 2014, 13:24

Nice. Change is good.

98tls

12th November 2014, 15:20

:niceone:some cool stuff in Rudras link.Looking forward to what you do...

The Lone Rider

12th November 2014, 16:36

Patterned out seat pan

https://scontent-a-ord.xx.fbcdn.net/hphotos-xpf1/t31.0-8/1519766_582703621825627_3290356575773873359_o.jpg

mossy1200

12th November 2014, 16:40

Im having trouble deciding what size the bike is.

I assume its a 800?

The Lone Rider

13th November 2014, 16:52

Cutting out seat pan

https://scontent-b-ord.xx.fbcdn.net/hphotos-xpa1/v/t1.0-9/p417x417/10151298_583560811739908_8466062983034203640_n.jpg ?oh=d380957dc0990a54184eb4d9b32580f7&oe=54D6F17D
https://scontent-b-ord.xx.fbcdn.net/hphotos-xfp1/t31.0-8/10272743_583560825073240_131248763577985553_o.jpg
https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-xaf1/t31.0-8/10001259_583560795073243_4297035606330276140_o.jpg

Rudra

13th November 2014, 18:50

Here's mine so far. Yes, it's an 800.
305311

The Lone Rider

14th November 2014, 06:59

Seat pan after a round on linisher

https://scontent-b-sjc.xx.fbcdn.net/hphotos-xfp1/l/t31.0-8/10265411_601206149975374_1693020758601109413_o.jpg

mossy1200

14th November 2014, 17:08

Seat pan after a round on linisher

You even labelled it in case you forgot how to use it.

Rudra

14th November 2014, 21:02

Is that the bottom of the seat pan, or the side your bottom goes on?

The Lone Rider

15th November 2014, 06:28

Looks like it'll suit - might use different cloth though

https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-xap1/t31.0-8/10380701_601206179975371_2106233908620750974_o.jpg

Rudra

15th November 2014, 12:35

Well, that answers my question.
I'm looking forward to seeing how you mount it.

mossy1200

15th November 2014, 18:11

The Lone Rider

16th November 2014, 15:05

http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/seats-seat-parts/auction-805792111.htm

I like your seat so much im thinking of buying this one in case I build a bobber one day.
I wouldn't mind a bobber project bike.

Cool seat. One thing I've learned is if I can make it, then make it cuz it often is less work than buying something not suited and fucking about trying to make it work. Home made pan you can put mounts on any way you like.

The Lone Rider

16th November 2014, 15:06

Started front hinge piece

https://scontent-a-ord.xx.fbcdn.net/hphotos-xaf1/t31.0-8/1655737_602766253152697_4213218934999277428_o.jpg

https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-xap1/t31.0-8/1559435_602766489819340_5698117129477862070_o.jpg

mossy1200

16th November 2014, 15:23

Hard to tell on photo but I take it that bolts through onto the rear tank mount onto solid frame? Is it getting the rear spring seat treatment?

The Lone Rider

17th November 2014, 17:02

More on bracket. Changed front piece to offset, so hinge sits higher.

https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-xap1/t31.0-8/10339311_606503766112279_2302754388271392475_o.jpg

The Lone Rider

18th November 2014, 15:50

Bit of drilling and grinding later

https://scontent-b-mia.xx.fbcdn.net/hphotos-xpf1/t31.0-8/10371179_609534595809196_5859059445134232109_o.jpg

The Lone Rider

19th November 2014, 17:05

Got hairpin springs in, and machined mount bungs.

https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-xfp1/v/t1.0-9/10485772_631599826936006_421594738693265902_n.jpg? oh=6fe7414f173b03b07588c8fb3ce3487f&oe=54E4D8B9&__gda__=1423692834_2d8976632232c125c68d703a793cb7b 1

The Lone Rider

20th November 2014, 19:57

Getting seat mount bungs

https://scontent-a-sjc.xx.fbcdn.net/hphotos-xpa1/v/t1.0-9/10364072_631599830269339_1068332159548853608_n.jpg ?oh=5acb1c9314db012ce34434b82d939086&oe=54DBBDD6

https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-xpf1/v/t1.0-9/10384456_631599846936004_4787444486352019979_n.jpg ?oh=9080c7a8bbcc3fe4386de1e98fb845c8&oe=54E2EB31&__gda__=1428073051_70c0ea2b3e61b8b2a4f1f855f59f5f6 d

https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-xfa1/v/t1.0-9/10568999_631599856936003_6327214364586444570_n.jpg ?oh=0c6e77a4d7b581875b0cf2a5b08c5617&oe=55113A61&__gda__=1423114583_b7332c262a9a88f6f0ebef74ce10760 f

https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-xfa1/v/t1.0-9/10423659_633065180122804_6523656452121440708_n.jpg ?oh=115f809bc9a1aea22174f130ff5c388e&oe=54DF0920&__gda__=1428055574_6da8b2f4a058b8fcae5b7b03dff2274 8

The Lone Rider

21st November 2014, 15:27

And start the mounts for the seat

https://scontent-a-cdg.xx.fbcdn.net/hphotos-xaf1/v/t1.0-9/10561795_632002673562388_5289233136849303721_n.jpg ?oh=54e7c5ea63859184e8ed85703a629bfc&oe=5517D2B5

https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-xpf1/v/t1.0-9/10552468_633065206789468_2053963661311725228_n.jpg ?oh=6e3ee747203cca3cddef63d6dcaaadac&oe=551F75A4&__gda__=1427983566_e0b16ff12c6b16e931bba140b938966 7

The Lone Rider

23rd November 2014, 17:13

Yeah, that'll work

https://scontent-a-ord.xx.fbcdn.net/hphotos-xfa1/v/t1.0-9/10530696_634648853297770_7574693231425105716_n.jpg ?oh=475c56ea3e65e579039ba1cc61dad52b&oe=54D89840

https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-xap1/v/t1.0-9/10378251_634648866631102_2064014227681684748_n.jpg ?oh=9571addf5253628704beefcad43765e4&oe=54D37840&__gda__=1427670172_bfe5d2644656e3dedf6d3867eae8249 1

https://scontent-b-ord.xx.fbcdn.net/hphotos-xpf1/v/t1.0-9/10552612_634648873297768_5435706599730244556_n.jpg ?oh=24efbe598541d37aff38eca4fc94c9ae&oe=550DCBD9

mossy1200

23rd November 2014, 17:28

That's cool
Did you sew the seat pad?

98tls

23rd November 2014, 17:56

That is cool indeed:Punk:that seats just begging 1/2 of that rear guard to piss off.

The Lone Rider

24th November 2014, 19:55

Finishing up putting on the seat bungs (Seat-wart Tentacles).

https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-xap1/v/t1.0-9/1903984_635094499919872_8773216190477295330_n.jpg? oh=bc78306f9da90579bab5e13de80178f6&oe=551CFE23&__gda__=1427649898_5654595ed4506c7fcf380b348b21e0e 4

https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-xap1/v/t1.0-9/10527789_636083773154278_766691317928990041_n.jpg? oh=d6d478f7adb27d4f275f4b209fc0bf9f&oe=54E0603C&__gda__=1427001717_127bc8b7cb762ba9e353124b2dc670f 9

The Lone Rider

25th November 2014, 18:18

Got some parts in, here's the indicator covers

https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-xap1/v/t1.0-9/10592858_647861198643202_1437068354989889774_n.jpg ?oh=71194561c3f36a28538bc52ad82a96ab&oe=550775C7&__gda__=1427746587_11ef339864132817fb5283ad01ca3d8 1

The Lone Rider

26th November 2014, 18:56

more seat

https://scontent-a-dfw.xx.fbcdn.net/hphotos-xpa1/v/t1.0-9/10629686_650018098427512_6410916924088209593_n.jpg ?oh=584ec3b4ddbebef9d4aa43029716ed0a&oe=54D712B3

https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-xaf1/v/t1.0-9/10590648_650018118427510_7918745962175840360_n.jpg ?oh=6f55921ac7f0fe499d1208c712af7c60&oe=5514206E&__gda__=1427522271_2d1af2dbda56928f99dee8f4f0c842f a

https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-xaf1/v/t1.0-9/10635748_650018111760844_7231839669314660478_n.jpg ?oh=03a6fc4a6ccc0bbc65287c4f7915f30d&oe=54D6CDD7&__gda__=1423286630_ab9118051587c9fd5ae75879ea16e9d b

https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-xpa1/v/t1.0-9/9293_650018141760841_4907785593890588923_n.jpg?oh= 262611a9b536860f974b818bd9773e22&oe=550F2752&__gda__=1423373451_0a92e62c8375731e851f54959b07733 3

https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-xpa1/v/t1.0-9/10649734_650018151760840_1312831767299259796_n.jpg ?oh=7af5582675b5548a330273576d560ece&oe=550D69E6&__gda__=1423653982_9f18fd253806a935164ba05380165d0 f

https://scontent-b-dfw.xx.fbcdn.net/hphotos-xap1/v/t1.0-9/10636016_650018165094172_8609288538724373472_n.jpg ?oh=77d2ae2e76a5f0d5771a5963223f11cf&oe=54DBE380

The Lone Rider

27th November 2014, 17:18

Had to put spacers in, wasn't quite enough vertical play in the seat.

https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-xpa1/v/t1.0-9/10603580_652626968166625_4176004972272930005_n.jpg ?oh=d7e067fd3efa62d13dba393b5a9c59bd&oe=54D73B28&__gda__=1423132560_74c8a14318380d90238d810a399415a 7

_Shrek_

28th November 2014, 16:32

Well, that answers my question.
I'm looking forward to seeing how you mount it.

:corn: don't you just throw your leg over it?

The Lone Rider

28th November 2014, 20:09

Fittings off, and brushed up

https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-xaf1/t31.0-8/10662108_658816400881015_2620173364525017189_o.jpg

The Lone Rider

29th November 2014, 06:35

Rear lights removed, marking out for new light

https://scontent-a-sjc.xx.fbcdn.net/hphotos-xap1/v/t1.0-9/10489626_658859630876692_5863740309988364887_n.jpg ?oh=0f0f39b28c501073928347a4541d9e19&oe=55117741

Spider

29th November 2014, 08:02

First thing's first, needs new chain and sprockets

What sprockets did you go for? I've got 18/38, drops the revs nicely for cruising, the factory ratio makes the bike fair sing at 100...

Sent from my W100 using Tapatalk

The Lone Rider

4th December 2014, 06:22

Grips arrived

https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-xpa1/v/t1.0-9/q90/p417x417/10632684_661435507285771_4627435666960886673_n.jpg ?oh=3f3a5d04d037fc5e5688dd16715e46e7&oe=551B7548&__gda__=1427417678_57d70580f6221375e8589ee60f98448 6

The Lone Rider

5th December 2014, 06:59

Drilling guide holes for new taillight

https://scontent-b-sjc.xx.fbcdn.net/hphotos-xfp1/v/t1.0-9/10620714_663703760392279_2666216559664618543_n.jpg ?oh=d9c0ed854ff39e7bcd99f69fcc087fd5&oe=54D17740

The Lone Rider

6th December 2014, 06:33

Bungs mounted, mark out for back rack

https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-xpa1/t31.0-8/10648833_664837450278910_5275343252898965401_o.jpg

The Lone Rider

7th December 2014, 13:24

Starting on the rack

https://scontent-b-sea.xx.fbcdn.net/hphotos-xpf1/t31.0-8/10321619_666231973472791_860691220087698049_o.jpg

The Lone Rider

9th December 2014, 18:58

Sides drilled

https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-xaf1/v/t1.0-9/10251928_666231956806126_6639244805406176074_n.jpg ?oh=91ab653b3c2b94fa0b356de199d68f4d&oe=550EDABB&__gda__=1427100170_19145d7ed80359bc35673398eebf78c 5

The Lone Rider

10th December 2014, 17:06

Little jig to make welding up square a bit easier

https://scontent-b-ord.xx.fbcdn.net/hphotos-xap1/v/t1.0-9/10665930_666231853472803_1294801127518277741_n.jpg ?oh=d9e1fb899e7749aa3490e0bcc7a871d2&oe=55139F02

https://scontent-b-ord.xx.fbcdn.net/hphotos-xpf1/t31.0-8/10258825_666232000139455_5718199769168256669_o.jpg

The Lone Rider

11th December 2014, 16:35

Weld up

https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-xfa1/v/t1.0-9/q82/p417x417/10291113_666231926806129_7552640803367947024_n.jpg ?oh=a119541dd798378cde6853c72e8ef446&oe=550232AC&__gda__=1426617601_fcf8eeffcd8526e1793c449a1eb9395 d

https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-xpf1/t31.0-8/10383840_666795826749739_7592866974311509137_o.jpg

The Lone Rider

12th December 2014, 11:53

Cut out the bottom side (will need to be thrown on linisher and some sanding drums etc)

https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-xfp1/v/t1.0-9/1970880_666795863416402_2692538406415047727_n.jpg? oh=95da3ada15041d3e33df95268fb61074&oe=55042578&__gda__=1425601251_c308fc626ebb746bbf36fb0cddbb32f 2

The Lone Rider

13th December 2014, 08:45

Handlebars sorted

https://scontent-a-sjc.xx.fbcdn.net/hphotos-xpa1/v/t1.0-9/10689577_669052056524116_8606095219364295931_n.jpg ?oh=41e4e5126092a71b6f5958ff8e93a482&oe=550F1998
https://scontent-a-sjc.xx.fbcdn.net/hphotos-xpa1/v/t1.0-9/10153863_669052079857447_5212321339903122174_n.jpg ?oh=36d297c5b2ee2bc80b4e38b9ad3733ca&oe=5500E1D1

insomnia01

13th December 2014, 09:38

this is looking :cool:

The Lone Rider

14th December 2014, 07:34

Got Unlucky Blinks around to burn his hands holding this level while I tack it

https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-xpa1/t31.0-8/10648299_670207913075197_6561649044520983457_o.jpg

The Lone Rider

16th December 2014, 21:17

Welded up now

https://scontent-a-sjc.xx.fbcdn.net/hphotos-xfa1/t31.0-8/10661703_671219039640751_4155882326550763909_o.jpg

The Lone Rider

17th December 2014, 13:34

Polished up, ready for chrome

https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-xap1/t31.0-8/10679679_676015679161087_4013784441651606388_o.jpg

The Lone Rider

21st December 2014, 09:17

Last few days to get one of our T shirts and have profits go to CanTeen

Measuring out the bars for drilling

https://scontent-a-sjc.xx.fbcdn.net/hphotos-xaf1/v/t1.0-9/1924395_680959108666744_3914357442621267879_n.jpg? oh=a5ca98f9736003e1a35adf9f3f7475ff&oe=5535D66D

The Lone Rider

22nd December 2014, 07:31

Mounted

https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-xpa1/v/t1.0-9/q84/p417x417/10702051_680959115333410_8590875100524429014_n.jpg ?oh=f6ad927529bba4c887d8e7785e8870e4&oe=55344F00&__gda__=1426359302_622cd7f063c94f7633c538996b36eff d

The Lone Rider

23rd December 2014, 08:26

Two days left for out CanTeen Fundraiser

Starting to paint some of the smaller parts.

https://scontent-a-sjc.xx.fbcdn.net/hphotos-xpa1/t31.0-8/10295550_683184388444216_7705162973552096810_o.jpg

mossy1200

23rd December 2014, 08:48

Mounted

Looks like you may need stand on the seat to reach the bars.

The Lone Rider

23rd December 2014, 19:52

Weld up of stock mount holes

https://scontent-a-sjc.xx.fbcdn.net/hphotos-xap1/v/t1.0-9/10653280_683753628387292_5204336564722546139_n.jpg ?oh=0bb1678bda7f46ddd4d2245301951f81&oe=5547AE88

The Lone Rider

24th December 2014, 09:02

Sand and prep

https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-xap1/v/t1.0-9/12778_685198321576156_2176978248001811605_n.jpg?oh =e38cd4acb8d7c796b783adf3e319cbf6&oe=5547176D&__gda__=1430750976_c5f4f5a86382c321ee30551b8dd1554 a

https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-xap1/t31.0-8/10648314_685224904906831_3961990304861935655_o.jpg

The Lone Rider

25th December 2014, 22:23

Further strip down for wiring and cables

https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-xap1/t31.0-8/10553651_685748298187825_1826711870296655304_o.jpg

The Lone Rider

26th December 2014, 07:41

Not looking to bad

https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-xpf1/v/t1.0-9/1779319_686746701421318_364997396094904123_n.jpg?o h=4fd03bb82421c5e5f8b7fdeff4402906&oe=5506514C&__gda__=1426100384_828f1d9ccf562833c097044edbe3bca 3

The Lone Rider

27th December 2014, 07:34

Time to start some wiring

https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-xpa1/v/t1.0-9/10731118_687971797965475_6107184899997248620_n.jpg ?oh=2a1a962531c490dda75ce6338e6fede3&oe=55444907&__gda__=1429238463_ba97de35c6bf7b453349981f3bf5bd3 3

mossy1200

27th December 2014, 10:18

Time to start some wiring

Bet your glad your bike not German.
So many cables to do so few functions.

The Lone Rider

27th December 2014, 17:57

Drilled for new light, body worked and sanded

https://scontent-a-lax.xx.fbcdn.net/hphotos-xpa1/v/t1.0-9/10685371_687971927965462_9027701583904979230_n.jpg ?oh=53e0504943467cc8f92a8c89edebe394&oe=54FA7F56

The Lone Rider

30th December 2014, 07:41

Bit of wiring done

https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-xpa1/t31.0-8/1410772_688366864592635_4460927345002714428_o.jpg

The Lone Rider

31st December 2014, 14:00

Coming up not to bad!

https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-xfp1/v/t1.0-9/1656422_689619971133991_5586764089541238830_n.jpg? oh=5b016a4a1919d1658c179de980e0b93d&oe=553A9B87&__gda__=1429453596_8237a83cd4bcafc2dca18e9a0404ba9 3

The Lone Rider

2nd January 2015, 09:10

I don't have access to a mill so I took this front bit in. Guy didn't do a very good job but good thing you're not gonna see it.

https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-xpa1/v/t1.0-9/q83/p417x417/10520683_689619967800658_3586445336877078280_n.jpg ?oh=7ed16fedcae49c2f0c157b31c4983d06&oe=5537C9F9&__gda__=1429330175_83882a19f4c9a203f2abdac99f66dc7 0

mossy1200

2nd January 2015, 12:25

I don't have access to a mill so I took this front bit in. Guy didn't do a very good job but good thing you're not gonna see it.

Buy yourself a dremel. I would have drilled 2 holes and dremel cut between them.
Also is that a seat mount part? Its like a cryptic puzzle working out where it goes.

schrodingers cat

2nd January 2015, 19:22

Buy yourself a dremel. I would have drilled 2 holes and dremel cut between them.
Also is that a seat mount part? Its like a cryptic puzzle working out where it goes.

Dremel my arse. You fulla's never heard of a file?
Get some skilz

_Shrek_

3rd January 2015, 09:43

Dremel my arse. You fulla's never heard of a file?
Get some skilz

they don't teach that these days.... archaic I'm told.... not to worry few more years & some one will re-invent the file :msn-wink:

The Lone Rider

3rd January 2015, 09:45

Unpleasant and dusty job

https://scontent-b-sjc.xx.fbcdn.net/hphotos-xap1/t31.0-8/1782488_689619974467324_5712105530245788385_o.jpg

mossy1200

3rd January 2015, 10:14

Dremel my arse. You fulla's never heard of a file?
Get some skilz

I was meaning the slot holes. Drill 2 holes and use the small circular dremel blade to cut between the holes to form the slots.

Grinder is for the rest.

The Lone Rider

4th January 2015, 14:48

One done

https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-xfa1/t31.0-8/10708530_689620001133988_6589865938405637514_o.jpg

The Lone Rider

8th January 2015, 18:58

Floorboards arrived

https://scontent-a-lax.xx.fbcdn.net/hphotos-xpa1/t31.0-8/10688098_689827384446583_685222946156408865_o.jpg

The Lone Rider

9th January 2015, 18:57

Got sections of the loom finished

https://scontent-a-lax.xx.fbcdn.net/hphotos-xpa1/l/t31.0-8/10700746_691736554255666_6310188212846829372_o.jpg

The Lone Rider

10th January 2015, 21:10

Rear on, just need to tidy up the wires and plugs

https://scontent-a-lax.xx.fbcdn.net/hphotos-xaf1/t31.0-8/10749936_691736467589008_2929082110235987438_o.jpg

The Lone Rider

11th January 2015, 13:33

Wires grips and levers on

https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-xfp1/t31.0-8/10750238_692257337536921_1984678215230683922_o.jpg

The Lone Rider

12th January 2015, 18:03

Got some classic round mirrors in. Hydraulic press and V block and they are lower profile.

https://scontent-b-lax.xx.fbcdn.net/hphotos-xfp1/t31.0-8/1412208_694316790664309_9148336115007155830_o.jpg

The Lone Rider

13th January 2015, 18:25

New rad and horn covers in

https://scontent-a-lax.xx.fbcdn.net/hphotos-xfa1/t31.0-8/1522715_695310547231600_2735658445074911936_o.jpg

The Lone Rider

16th January 2015, 18:32

Had to modify a frame bracket to hold the battery down without the factory seat on top of it.

https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-prn1/t31.0-8/10478799_696705540425434_7264646508845878274_o.jpg

insomnia01

17th January 2015, 06:34

This is going to look cool when finished :yes::yes::yes: Good on yah Chap !!

The Lone Rider

18th January 2015, 13:37

Tank done

https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-xpa1/t31.0-8/10835467_696705537092101_5320966377564724604_o.jpg

ruaphu

18th January 2015, 14:28

Comin along nicely. The tank job is hard case with little hand prints on it. Cheers

Sent from my iPhone using Tapatalk

mossy1200

18th January 2015, 19:15

Looks good LR but you need a less fuzzy camera to catch the brilliance better.

The Lone Rider

19th January 2015, 05:41

Forgot to change out the coolant while I was at it

https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-xpf1/t31.0-8/10454891_696774967085158_6553228633774398177_o.jpg

The Lone Rider

20th January 2015, 06:13

https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-xap1/v/t1.0-9/10689608_704193653009956_226269595253581255_n.jpg? oh=d3db6a7e5b3f380d928b424c45f2f9fc&oe=556E085D&__gda__=1429027604_13298c0504dbfad346bc06dd8283572 6

mossy1200

20th January 2015, 14:25

Very bad bike:rockon:

Spider

20th January 2015, 15:02

The Lone Rider

20th January 2015, 20:20

No, they arent.

Spider

20th January 2015, 20:56

No, they arent.

Cobra?

Sent from my V3 Plus using Tapatalk

The Lone Rider

3rd February 2015, 19:55

The Lone Rider

5th December 2015, 14:45

Where we were at last time I posted. Wasn't quite what I wanted so I've done more since.

https://scontent.fakl1-1.fna.fbcdn.net/hphotos-xta1/v/t1.0-9/10689608_704193653009956_226269595253581255_n.jpg? oh=5434348950feb61ce0f53a4f4226829b&oe=5721175D

The Lone Rider

5th December 2015, 14:49

Took off side stand as the spring stud was worn out. Repaired threads, machined new stud, and welded on.

https://scontent.fakl1-1.fna.fbcdn.net/hphotos-xtf1/v/t1.0-9/12002742_847118622050791_9015904725928193255_n.jpg ?oh=e9eefc45d1ad1fca7f58dce78e984c36&oe=56E6BF89

https://scontent.fakl1-1.fna.fbcdn.net/hphotos-xtf1/v/t1.0-9/12002905_847119172050736_844362671175204476_n.jpg? oh=252ae5968e492dc071aca50b0326bce9&oe=56EF0639

https://scontent.fakl1-1.fna.fbcdn.net/hphotos-xft1/t31.0-8/12002518_848828578546462_3804709240561190129_o.jpg

Spider

5th December 2015, 17:08

Spider

5th December 2015, 17:26

Motor issues at moment. Started coughing and fluttering while riding on way to work (not far from work); similar to running out of petrol and needing to be swapped to reserve. Got about 17k out of the 18k to work before it started doing it. Range of 50, 70, and 100kmph roads.

Died right as I coasted into parking space.

Seems front cylinder isn't firing.

Cable on front lead came off boot when I went to take boot out of cylinder.

Fucking around with it during my breaks, though not much time to do work on it.

Did you get this sorted? The petcocks are vacuum controlled, so they turn off when there's no vacuum (like engine not running). I think they can go faulty, and changing it to reserve can diagnose it, as the reserve setting isn't vacuum controlled and the bike will then run ok. A blocked fuel cap vent can also cause it, but doesn't usually go away when you turn to reserve, but will be ok for a few k's after opening the fuel cap and closing.

The Lone Rider

5th December 2015, 18:31

Did you get this sorted? The petcocks are vacuum controlled, so they turn off when there's no vacuum (like engine not running). I think they can go faulty, and changing it to reserve can diagnose it, as the reserve setting isn't vacuum controlled and the bike will then run ok. A blocked fuel cap vent can also cause it, but doesn't usually go away when you turn to reserve, but will be ok for a few k's after opening the fuel cap and closing.

The boot needed a clean, rewire and reseat.

The Lone Rider

5th December 2015, 18:33

Caliper rebuild

https://scontent.fakl1-1.fna.fbcdn.net/hphotos-xat1/v/t1.0-9/12032030_849262248503095_7641533143527001347_n.jpg ?oh=e6eb7eabed9d5205dcd8f4284f25f672&oe=56E07254

https://scontent.fakl1-1.fna.fbcdn.net/hphotos-xta1/v/t1.0-9/12038352_849262268503093_8977488074592472883_n.jpg ?oh=54d9c3b0a861c23720605f4f565b3530&oe=571E8ADD

The Lone Rider

6th December 2015, 11:25

Parts off to chrome

https://scontent.fakl1-1.fna.fbcdn.net/hphotos-xaf1/v/t1.0-9/12019914_852841234811863_7350907094903855535_n.jpg ?oh=7ae36b4180900b1b5ec85d39c411811b&oe=56F391E6

Pistons needing tidy

https://scontent.fakl1-1.fna.fbcdn.net/hphotos-xft1/v/t1.0-9/11951928_853996834696303_6742247523446368907_n.jpg ?oh=e8733591374385dd185cde03a9a0f96a&oe=56D99067

https://scontent.fakl1-1.fna.fbcdn.net/hphotos-xtp1/v/t1.0-9/12027508_854010001361653_8973993495320723781_n.jpg ?oh=ea34676f975fd97e186e3458afc70e6e&oe=571FC61D

The Lone Rider

6th December 2015, 13:52

Muffler, with bit thats been trimmed off and end plug removed

https://scontent.fakl1-1.fna.fbcdn.net/hphotos-xpl1/v/t1.0-9/12105862_864130023682984_8973839334600198924_n.jpg ?oh=1ef5f006c18e3a2a35264dd65558ad41&oe=56E9E515

The Lone Rider

7th December 2015, 06:30

Machined a couple of exhaust parts

https://scontent.fakl1-1.fna.fbcdn.net/hphotos-xap1/v/t1.0-9/12088200_860153720747281_4789890977618096643_n.jpg ?oh=fa3d866d7ed7efae9eeaed3656a652bc&oe=56E4E236

The Lone Rider

7th December 2015, 16:23

Figuring out the header pipes

https://scontent.fakl1-1.fna.fbcdn.net/hphotos-xtf1/v/t1.0-9/12188996_866405316788788_6366472786650571777_n.jpg ?oh=a7f46518cfe77b12b30383a87ac83ea9&oe=572102C9

https://scontent.fakl1-1.fna.fbcdn.net/hphotos-xaf1/v/t1.0-9/11049642_866798236749496_5207216197174777416_n.jpg ?oh=095661989bb818bd82e8922386862637&oe=56EE004B

The Lone Rider

8th December 2015, 19:51

Bit more header pipe work

https://scontent.fakl1-1.fna.fbcdn.net/hphotos-xfa1/v/t1.0-9/12239718_872476736181646_4621581085260957358_n.jpg ?oh=55095ba108ec9bbeb0bb3555144e6e15&oe=56D63A78

The Lone Rider

12th December 2015, 15:15

Chrome back

https://scontent.fakl1-1.fna.fbcdn.net/hphotos-xtp1/v/t1.0-9/11693900_872918489470804_5413208254310042253_n.jpg ?oh=5fc762891528681e7b570697d3dd00b0&oe=56DFA3BE

J.A.W.

16th December 2015, 17:50

Starting with this

Look man, at the risk of being a bit frank, ( & with due respect for your fabrication efforts).. just how does this dunger meet..
..the ambitious thread title?

Seems to me.. its kinda like the "Holy Roman Empire, neither holy, Roman , or an empire"..

Now if you'd change the title to something along the lines of 'How to overcapitalize a clunky ol' wannabe H-D Japper' - fair enough..
..or even.. 'My take on turd polishing, but yeah, fair enough, laugh if you must'..

Be honest, eh.. or at least give us another laugh by attempting to explain why you put up that pretentious title, ta..

The Lone Rider

16th December 2015, 18:22

And continuing on, new chrome on the front end is quite a gem. I'm glad to see the pitting gone.

https://scontent.fakl1-1.fna.fbcdn.net/hphotos-xap1/v/t1.0-9/12241600_874509275978392_5909271446018303636_n.jpg ?oh=a77950bc0648cf2a2a36c6f30d939869&oe=57226496

Spider

17th December 2015, 12:02

Look man, at the risk of being a bit frank, ( & with due respect for your fabrication efforts).. just how does this dunger meet..
..the ambitious thread title?

Seems to me.. its kinda like the "Holy Roman Empire, neither holy, Roman , or an empire"..

Now if you'd change the title to something along the lines of 'How to overcapitalize a clunky ol' wannabe H-D Japper' - fair enough..
..or even.. 'My take on turd polishing, but yeah, fair enough, laugh if you must'..

Be honest, eh.. or at least give us another laugh by attempting to explain why you put up that pretentious title, ta..

It's a good thing that you have respect for Lone Rider's fabrication efforts, as there's not much respect in the rest of your post. Not everyone likes H-D, or can afford a H-D, some may even prefer Kawasaki anyway. As for the modifications, he can do what he likes, when he likes, and it may not be costing much to do, seeing as he's doing most of it himself as far as I can see. There's plenty of people that throw major amounts of cash at their projects, and if they get what they want at the end of it, who cares? As long as they don't make you buy their project, why would you care?

Don't have a go at someone because someone else's bike doesn't live up to your expectations, I think we need a little less of the brand and quality put downs and more of the "good on you for having a go to get what you want". Who knows what it might end up as at the end of the project?

As for the title, the bike is a Kawasaki Vulcan Classic, so the title has nothing to do with the age of the bike, so I don't see a problem with the title.

J.A.W.

17th December 2015, 16:36

It's a good thing that you have respect for Lone Rider's fabrication efforts, as there's not much respect in the rest of your post. Not everyone likes H-D, or can afford a H-D, some may even prefer Kawasaki anyway. As for the modifications, he can do what he likes, when he likes, and it may not be costing much to do, seeing as he's doing most of it himself as far as I can see. There's plenty of people that throw major amounts of cash at their projects, and if they get what they want at the end of it, who cares? As long as they don't make you buy their project, why would you care?

Don't have a go at someone because someone else's bike doesn't live up to your expectations, I think we need a little less of the brand and quality put downs and more of the "good on you for having a go to get what you want". Who knows what it might end up as at the end of the project?

As for the title, the bike is a Kawasaki Vulcan Classic, so the title has nothing to do with the age of the bike, so I don't see a problem with the title.

Jeeze Spider, are you his mother, or just his squeeze?

Best you follow your own advice & "Don't have a go at someone..."
Of course he can do what he wants with his shit.. but if he puts it up here, he's per se inviting comment.. & so are you..

But hey, thanks for confirming that this vanity thread needs to be moved from the actual 'classic' section, to the 'Nippon custom cruiser' tart-up dept..

gsxr

17th December 2015, 16:50

Jeeze Spider, are you his mother, or just his squeeze?

Best you follow your own advice & "Don't have a go at someone..."
Of course he can do what he wants with his shit.. but if he puts it up here, he's per se inviting comment.. & so are you..

But hey, thanks for confirming that this vanity thread needs to be moved from the actual 'classic' section, to the 'Nippon custom cruiser' tart-up dept..
Thank you for enlightening us all J.A.W
You have an apt screen name abreviated from JUST A WANKER.
Do you expound as much excreted IRL or is it just your keyboard that has the attitude problem.

J.A.W.

17th December 2015, 17:10

Thank you for enlightening us all J.A.W
You have an apt screen name abreviated from JUST A WANKER.
Do you expound as much excreted IRL or is it just your keyboard that has the attitude problem.

& have you gsxr, got something to actually contribute to the topic?

A critique of some technical nature perhaps? A defence of LR's selected colour palate choice, maybe?

Otherwise, be advised, your post is reportable as abusive/off-topic..

Or is it - that you are really upset enough to post-nasty, because - you are in fact - the LR's squeeze? L.O.L...

AllanB

17th December 2015, 17:30

One of my favorite Dennis Berg 'Cobra' builds is a VN800. He did a really nice basic black chopper too.

Spider

17th December 2015, 18:09

Jeeze Spider, are you his mother, or just his squeeze?

Best you follow your own advice & "Don't have a go at someone..."
Of course he can do what he wants with his shit.. but if he puts it up here, he's per se inviting comment.. & so are you..

But hey, thanks for confirming that this vanity thread needs to be moved from the actual 'classic' section, to the 'Nippon custom cruiser' tart-up dept..

Don't know Lone Rider, but some things I like about his build, some I could pass on, but I don't think it's my place to put his ride down. I guess you've never heard the saying "If you don't have anything nice to say, then don't say it", especially when it's uncalled for...

Sent from my V3 Plus using Tapatalk

Spider

17th December 2015, 18:13

One of my favorite Dennis Berg 'Cobra' builds is a VN800. He did a really nice basic black chopper too.

Nice, drum brakes too...

Sent from my V3 Plus using Tapatalk

rambaldi

17th December 2015, 18:18

Bit more header pipe work

From this pic it looks like you might be heading towards doing a 2 into 1 exhaust. Are you just banging something together with the pipes, anything goes. Or are you doing anything to ensure good exhaust length to match the pulses? Or have I misjudged your intentions and to do 2 pipes as it had stock?

ellipsis

17th December 2015, 18:19

...if, like most, Just A Wanker was ignored and not played with...just sayin...

J.A.W.

17th December 2015, 18:34

Don't know Lone Rider, but some things I like about his build, some I could pass on, but I don't think it's my place to put his ride down. I guess you've never heard the saying "If you don't have anything nice to say, then don't say it", especially when it's uncalled for...

Yeah? Who are you to be arbiter of what is "called for" anyhow Spider..

As for your hypocritical platitudes about criticism.. pretty ironic eh.. "What a web we weave..."

LR is up for critique of his doings, for sure.. or otherwise - why would he post it up here - on social media..
& LR can respond for himself, if he wants to.. so how about you take you own advice there too eh, fella..

I also note that you didn't pile in - when LR's fabrication techniques were being critically appraised, earlier in the thread.. or didn't you actually read it?

Too funny..

FJRider

17th December 2015, 19:02

Yeah? Who are you to be arbiter of what is "called for" anyhow Spider..

Just another member of this site with the same (if not more) privileges as you have ...

As for your hypocritical platitudes about criticism.. pretty ironic eh.. "What a web we weave..."

At least he isn't a complete and total fuckwit like you ...

LR is up for critique of his doings, for sure.. or otherwise - why would he post it up here - on social media..
& LR can respond for himself, if he wants to.. so how about you take you own advice there too eh, fella..

YOU are also up for critique to by posting comments on social media. Who are YOU to decide who can/should comment/respond ... ??

I also note that you didn't pile in - when LR's fabrication techniques were being critically appraised, earlier in the thread.. or didn't you actually read it?

The fact that you may be be capable of reading full sentances ... continues to amaze me. Actually understanding what was written ... seems to continue to elude you though ...

Too funny..

Small minds are easily amused ...

gsxr

17th December 2015, 19:08

& have you gsxr, got something to actually contribute to the topic?

A critique of some technical nature perhaps? A defence of LR's selected colour palate choice, maybe?

Otherwise, be advised, your post is reportable as abusive/off-topic..

Or is it - that you are really upset enough to post-nasty, because - you are in fact - the LR's squeeze? L.O.L...

Thank you Just A wanker for yet another inane comment.
I have read and reread your comments to enable me to understand how your keyboard is analyzing things.
Apart from your comment about LR fabrication skills everything is negative.
Not everyone has your taste in the perfect ride and thank fuck for that
If I wish to add Yamaha jog scooter fairing to my 996 then that is my choice.
Nothing to add to LR build as he is doing it as he wants it and so far looks all good to me.
If he was asking for advice then Im sure it would be forthcoming.

Feel free to report me and give me red rep.
I can handle that from JUST A Wanker

J.A.W.

17th December 2015, 19:29

Thank you Just A wanker for yet another inane comment.
I have read and reread your comments to enable me to understand how your keyboard is analyzing things.
Apart from your comment about LR fabrication skills everything is negative.
Not everyone has your taste in the perfect ride and thank fuck for that
If I wish to add Yamaha jog scooter fairing to my 996 then that is my choice.
Nothing to add to LR build as he is doing it as he wants it and so far looks all good to me.
If he was asking for advice then Im sure it would be forthcoming.

Feel free to report me and give me red rep.
I can handle that from JUST A Wanker

Too funny.. & shit, you are way too sensitive..

I dare you to do a thread showing you desecrating a 996.. & await the comments you'll draw for doing so..

But, of course that proposal of yours - is simply an "inane comment".. since you actually have some obsolescent ol' shitbox..
What's the matter, can't you upgrade to a 1/2 decent SRAD? L.O.L...

I won't report/red rep you, ( bet you can't wait to get into doing that, eh) - but some busybody hypocritical stick-in-the-mud much like you, likely will..

The Lone Rider

17th December 2015, 20:27

gsxr

17th December 2015, 21:17

Looks good Be good to see the end result.

But is the back cylinder header long
enough to be balanced ???

AllanB

17th December 2015, 21:25

Looks good Be good to see the end result.

But is the back cylinder header long
enough to be balanced ???

Cruiser mate - don't worry about that shit it's not revving to 10,000 rpm - you will never notice.

rambaldi

18th December 2015, 12:11

Front end assembly done. Exhaust assembly done.

https://scontent.fakl1-1.fna.fbcdn.net/hphotos-xfp1/v/t1.0-9/12279133_877075615721758_6808582317297365321_n.jpg ?oh=043c087e4f60bb9f82c1b0f7584b1d50&oe=571C60AA

I guess that answers one of my queries, the exhaust looks nice :) Are you doing anything to balance the pulses or are you going with Allan's solution of fuck it, its a cruiser who cares?

J.A.W.

18th December 2015, 18:44

I guess that answers one of my queries, the exhaust looks nice :) Are you doing anything to balance the pulses or are you going with Allan's solution of fuck it, its a cruiser who cares?

Are you taking the piss out of gsxr - Rambi?

Or are you really just as ignorant...

FYI, A-B is correct about that.. & you'll see the same if you check out most any dungery ol' V-twin with a 2-into-1 pipe..

( & also FYI, you'll likely get pinged by an anal moderator - for duplicating that pic, too)..

gsxr

18th December 2015, 19:32

Are you taking the piss out of gsxr - Rambi?

Or are you really just as ignorant...

FYI, A-B is correct about that.. & you'll see the same if you check out most any dungery ol' V-twin with a 2-into-1 pipe..

( & also FYI, you'll likely get pinged by an anal moderator - for duplicating that pic, too)..

I was merely asking a simple question. Yes oid Vtwins run fine with unbalanced exhausts but if I was going to the extreme that LR is i would want some extra performance out of it as well
Unless of course you just want the blip blop pop bang pop bang pop of an unbalanced exhaust.
Merely asking a simple question.
Myself If I was going to the trouble of building new headers I would build them balanced but each to there own.
That is what is great about motor cycles we all have our differing oppinions and preferences and can customise,modify,performance modify or bling them out to our own needs or preferences

J.A.W.

18th December 2015, 20:15

I was merely asking a simple question. Yes oid Vtwins run fine with unbalanced exhausts but if I was going to the extreme that LR is i would want some extra performance out of it as well
Unless of course you just want the blip blop pop bang pop bang pop of an unbalanced exhaust.
Merely asking a simple question.
Myself If I was going to the trouble of building new headers I would build them balanced but each to there own.
That is what is great about motor cycles we all have our differing oppinions and preferences and can customise,modify,performance modify or bling them out to our own needs or preferences

Are you suggesting that LR should add a 'balance' pipe between the headers straight across, under the intake air-box?

You do realize that those V-twins do not have even firing intervals, (unlike your Suzuki), & it aint no Britten..so, for such sluggard it doesn't really matter..
Opinion does not come into it either, 'cept in the aesthetic looks depts

The Lone Rider

20th December 2015, 13:46

Putting on a different seat from what I originally made (that seat and the Cobra exhaust are both for sale).

Cutting up a swap meet two person seat pan

https://scontent.fakl1-1.fna.fbcdn.net/hphotos-xtp1/v/t1.0-9/12246805_875590482536938_774782258831888355_n.jpg? oh=794c63d634382deeff4c1509e5d8ebe0&oe=571E8762

Spider

20th December 2015, 16:37

Putting on a different seat from what I originally made (that seat and the Cobra exhaust are both for sale).

Cutting up a swap meet two person seat pan

Pm'd you...

Sent from my V3 Plus using Tapatalk

rambaldi

21st December 2015, 11:43

The Lone Rider

22nd December 2015, 15:40

A play around with positioning and barrel springs

https://scontent.fakl1-1.fna.fbcdn.net/hphotos-xtf1/v/t1.0-9/12294811_881146185314701_6766379484494481415_n.jpg ?oh=503b2c2f269e46eba0b75f049dc641d6&oe=570880CB

ruaphu

23rd December 2015, 05:42

Looking good LR, keep em piccy's comin

Sent from my iPhone using Tapatalk

The Lone Rider

23rd December 2015, 11:04

New front hinge bracket to suit the higher seat height.

https://scontent.fakl1-1.fna.fbcdn.net/hphotos-xtf1/v/t1.0-9/12342579_881146235314696_5625119811580574359_n.jpg ?oh=ee4810efe59e9b3d18ebcb44ade598c3&oe=5708EDE0

The Lone Rider

3rd January 2016, 14:40

Took a piece out of a finger flap disking this to shape

https://scontent.fakl1-1.fna.fbcdn.net/hphotos-xpf1/v/t1.0-9/12301543_881146255314694_8479884543917690472_n.jpg ?oh=7527a31ff755c94352fad93ea6179cb6&oe=5718A6EE

The Lone Rider

8th January 2016, 14:32

Bit of paint touch up I'm yet to do (and an indicator mount needing repair) but other than that, done burgers

https://scontent.fakl1-1.fna.fbcdn.net/hphotos-xpa1/v/t1.0-9/12313868_881426185286701_2399258591526185760_n.jpg ?oh=d75d8453c42c2ea9ce091de66ad2bdca&oe=5743758C

insomnia01

8th January 2016, 14:59

:yes::yes::yes::yes::yes::yes::yes: More pic's pleaseeee :drool::drool::drool:

ruaphu

11th January 2016, 20:17

Yep what he said please, a decent set of pics, cheers

Sent from my iPhone using Tapatalk

The Lone Rider

10th February 2016, 21:28

https://scontent.fakl1-1.fna.fbcdn.net/hphotos-xfp1/t31.0-8/s960x960/12710731_914302245332428_8563940141017233298_o.jpg

Spider

11th February 2016, 06:23

It's out and about, awesome!

Sent from my V3 Plus using Tapatalk

insomnia01

12th February 2016, 06:48

CHUR, CHUR !!!!! Looking Good MISTER :2thumbsup

AllanB

12th February 2016, 20:49

Cool. Tip for custom seats. A orbital sander will help smooth and shape the foam. Once tidy glue a topping layer of thin foam on top - the smoother the base foam is the better the vinyl will look once stretched over it.

The Lone Rider

15th February 2016, 20:52

https://scontent.fakl1-1.fna.fbcdn.net/hphotos-xft1/v/t1.0-9/12717354_917079931721326_514496487143819025_n.jpg? oh=5c76cf7955ae30a423710d246ead92a8&oe=5770057C

Spider

16th February 2016, 04:38

https://scontent.fakl1-1.fna.fbcdn.net/hphotos-xft1/v/t1.0-9/12717354_917079931721326_514496487143819025_n.jpg? oh=5c76cf7955ae30a423710d246ead92a8&oe=5770057C
Bikes always look better out in the sun, job well done!

Sent from my V3 Plus using Tapatalk

The Lone Rider

29th October 2018, 19:34

Did bit more to this last summer(ish).

Just paint work, and some stuff got rechromed.

Paintwork I tried putting my branding logo on it but didn't like it. And frankly I still prefer my custom builds to have my kids handprints on them rather than branding.

Paint I did was purposefully "wrecked", but has been heavily clear coated over. Still a bit of scaling left on it, but it's all sealed up good. Looks real old now - a bit like those 2018 Fender relic guitars

https://scontent.fakl1-1.fna.fbcdn.net/v/t1.0-9/22728664_1429301173832530_6620426436141562513_n.jp g?_nc_cat=108&_nc_ht=scontent.fakl1-1.fna&oh=0f6aac09c8473cf56cbcec2cf4a7073a&oe=5C4E03C0https://scontent.fakl1-1.fna.fbcdn.net/v/t1.0-9/22788724_1429301203832527_3080571480085077098_n.jp g?_nc_cat=105&_nc_ht=scontent.fakl1-1.fna&oh=87a929c2f2cadbc5191b42fac85e7cd5&oe=5C7CD220
https://scontent.fakl1-1.fna.fbcdn.net/v/t1.0-9/22552626_1429301230499191_2984356323284368771_n.jp g?_nc_cat=102&_nc_ht=scontent.fakl1-1.fna&oh=d6cd92490ccd9b57f9ead514e4f4171e&oe=5C514A7E