imthatguy
28th November 2014, 23:29
Hello again guys, thanks for all your help and input in my last thread about my ZZR overheating.
I ended up sourcing a new engine because the bike never ran quite right after I put it back together; issues starting, impossible to idle without choke, totally dead acceleration.
I set aside today to install the engine I picked up on Thursday, low milage, good nic', 2 week warranty bla bla.
Low and behold exactly the same thing is happening?!
So Im fairly sure its not engine related, and there is definitely seems to be good spark, so Im pretty sure its carb related.
However, as this is my first bike and I don't have a manual Im not entirely sure I know what Im actually looking for..
The issues are:
Hard to start with/without choke
Won't run at all without choke
Will immediately die when you even go near the accelerator
Seems to be running quite hot, though Im not sure on that one
Has anyone got any wisdom as to what my next steps should be? At this stage Im going to train the carbs tomorrow and see if that makes any difference, then deconstruct and clean, then possibly take then in to a bike shop if all else fails.
The funny thing is all of this started happening post bike overheating, I can't see how the two are related however.
I ended up sourcing a new engine because the bike never ran quite right after I put it back together; issues starting, impossible to idle without choke, totally dead acceleration.
I set aside today to install the engine I picked up on Thursday, low milage, good nic', 2 week warranty bla bla.
Low and behold exactly the same thing is happening?!
So Im fairly sure its not engine related, and there is definitely seems to be good spark, so Im pretty sure its carb related.
However, as this is my first bike and I don't have a manual Im not entirely sure I know what Im actually looking for..
The issues are:
Hard to start with/without choke
Won't run at all without choke
Will immediately die when you even go near the accelerator
Seems to be running quite hot, though Im not sure on that one
Has anyone got any wisdom as to what my next steps should be? At this stage Im going to train the carbs tomorrow and see if that makes any difference, then deconstruct and clean, then possibly take then in to a bike shop if all else fails.
The funny thing is all of this started happening post bike overheating, I can't see how the two are related however.