Fake of a fake?

[cotswold]

Ok my OKO has arrived (eventually) I have included all round pictures of the packaging for all you oko aficionado's
Is this a fake fake or genuine fake ??

[chrisc]

Well.... it's definitely fake. Button mains or hex?

[cotswold]

thanks Chris, I took it apart and the quality is ferkin terrible, the slide is so bad I laughed, main jet is a button and has no sizing on it, I may be able to use the gaskets but as for the rest, it's so bad I would not put it on a foul stroke.
If any one wants it go through my rubbish

[husaberg]

thanks Chris, I took it apart and the quality is ferkin terrible, the slide is so bad I laughed, main jet is a button and has no sizing on it, I may be able to use the gaskets but as for the rest, it's so bad I would not put it on a foul stroke.
If any one wants it go through my rubbish

http://scootdawg.proboards.com/thread/56843/oko-carburetors-genuine-fakes

Where was it from?

[chrisc]

thanks Chris, I took it apart and the quality is ferkin terrible, the slide is so bad I laughed, main jet is a button and has no sizing on it, I may be able to use the gaskets but as for the rest, it's so bad I would not put it on a foul stroke.
If any one wants it go through my rubbish

I've seen them with slide problems before too. The one I use doesn't fit other slides I've tried. I have another slide here you could try? Otherwise yeah I'll go through your rubbish for it.

[TZ350]

Ok my OKO has arrived (eventually) I have included all round pictures of the packaging for all you oko aficionado's Is this a fake fake or genuine fake ??

The original OKO fake is made in Taiwan and the body of the carb is cast from a grainy cast alloy that machines quite well. An original OKO,s bore is bored straight through, no taper at all. But if its a pot metal body then its definitely a fake of a fake. Bring it around and we can see what can be done with it.

[cotswold]

http://scootdawg.proboards.com/thread/56843/oko-carburetors-genuine-fakes

Where was it from?

EBay, it said made in Taiwan and genuine OKO but I figured it was BS, it really is very poor

[chrisc]

Where does KOSO fit in here. Also a fake of a fake I'm sure. It's what I've been running on my diesel which probably explains a few things hahaha

[TZ350]

Where does KOSO fit in here. Also a fake of a fake I'm sure.

Yes I am pretty sure a Koso is a Fake of a Fake for sure.

[husaberg]

EBay, it said made in Taiwan and genuine OKO but I figured it was BS, it really is very poor

So how does it match the website how to pick a fake?
Where does TZ350's ones come from Akunar?

[Yow Ling]

I think the ones Akunar sells are the genuine fakes

[chrisc]

Yes I am pretty sure a Koso is a Fake of a Fake for sure.

Yep. I run a button head, small emulsifier tube KOSO fake fake. Says a lot about the quality of the throttle response...

[TZ350]

Where does TZ350's ones come from Akunar?

Treatland TV, team ESE have brought maybe 6-8 of them from TV over the years. https://www.treatland.tv/SearchResults.asp?Search=oko

[husaberg]

Treatland TV, team ESE have brought maybe 6-8 of them from TV over the years. https://www.treatland.tv/SearchResults.asp?Search=oko

Taiwanese carbs direct from the USA;)

Seen this site today.
http://www.oko-australia.com.au/parts-and-accessories
http://www.oko-australia.com.au/

[Farmaken]

The "good" ones have the taiwanese flag on the box - top R corner.
Sadly your one does not....

[F5 Dave]

Those Keihins are pretty alright.

[Pumba]

Found this. May be of interest.

http://www.mid-atlantictrials.com/Copies.html

[omamari]

Hey, I've got the same fake fake.


I took it apart and the quality is ferkin terrible, the slide is so bad I laughed, main jet is a button and has no sizing on it

Do the normal OKO jets fit in? Or I am wasting my time making a cable for this bad boy if it's never going to run right.

Cheers

[husaberg]

Hey, I've got the same fake fake.



Do the normal OKO jets fit in? Or I am wasting my time making a cable for this bad boy if it's never going to run right.

Cheers

http://www.miniriders.com/carby-and-tuning/26815-keihin-pwk-copy-carb-mods.html

[cotswold]

http://www.miniriders.com/carby-and-tuning/26815-keihin-pwk-copy-carb-mods.html

cheers Hussa thats gold, may be able to convert the sows arsehole into an ear with a bit of luck

[cotswold]

Inbox
x

eBay Member: partsmarket2011 Aug 15 (3 days ago)
eBay sent this message to tim . Your registered name is i...

eBay Member: partsmarket2011 <partsm_jvi4109si@members.ebay.com.hk>
8:01 PM (21 hours ago)

to me
eBay eBay sent this message to tim
Your registered name is included to show this message originated from eBay. Learn more.
Seller has responded to your question about this item
Do not respond to the sender if this message requests that you complete the transaction outside of eBay. This type of offer is against eBay policy, may be fraudulent, and is not covered by buyer protection programs. Learn More


Dear

hi Tim

how are you

what i know is the carby is from OKO factory , and you can see my photos showed, i never write any jets size on ebay photos or ebay description . because i dont know the size.

another side, i sold so many OKO carby, and only you said it was a fake . you can see my feedback, it was not cheap item.


what i can do is : if you insist to feel it was not real OKO. then send it back to me, i will refund the payment .

there are lots of other clients need it.

peter

From: eBay Member: t
Sent: Monday, August 17, 2015 3:26 PM
To: peter82c@hotmail.com
Subject: 針對物品編號 161730504241 提出問題，結束時間為 2015-07-10 15:54:08–OKO 28MM FLAT SLIDE Racing Carb SCOOTER ATV QUAD Motorcycles Buggies Carburator



Dear partsmarket2011,

Hi guys,
The " OKO " arrived but is rubbish, it is a FAKE
The slide is so bad it would be unusable in a lawn mower, the main jet on an original OKO is hexagonal and has the jets size on it, yours was a button and no size
I want a full refund as it is so obviously not an OKO.
If I hear nothing back I'll contact EBAY and show them a real OKO and your fake and they can decide what to do
Tim


Click the Respond button to reply through Messages, or go to your email to reply

Respond

OKO 28MM FLAT SLIDE Racing Carb SCOOTER ATV QUAD Motorcycles Buggies Carburator
OKO 28MM FLAT SLIDE Racing Carb SCOOTER ATV QUAD Motorcycles Buggies Carburator
Item Id: 161730504241
End time: Jul-10-15 00:54:08 PDT
Seller:
partsmarket2011 (2792)
100.0% Positive Feedback
Member since Feb-24-11 in China
Location: 浙江省, China
Listing Status: This message was sent while the listing was closed.

[kel]

i sold so many OKO carby, and only you said it was a fake . you can see my feedback, it was not cheap item.
only very best quality for you mister Tim, special price, no fakey fakey :killingme
while I can't remember dealing directly with this seller I have told a number of ebay sellers that their genuine best quality are in fact knock off trash, has no impact but I enjoy it :argue:

[husaberg]

cheers Hussa thats gold, may be able to convert the sows arsehole into an ear with a bit of luck

Not sure how it will fix a sloppy slide though.

[cotswold]

only very best quality for you mister Tim, special price, no fakey fakey :killingme
while I can't remember dealing directly with this seller I have told a number of ebay sellers that their genuine best quality are in fact knock off trash, has no impact but I enjoy it :argue:

You crack me up Kel, he said to send it back but I told him that as he would only resell it to anther sucker I would throw it in the bin and give him god awful feed back, which I have, looking forward to his reply.