View Full Version : SJ50QT mods?
Vymur
22nd August 2015, 15:59
Hello,
I just recently got a SJ50QT and i am wanting you do some mods to make it faster.
I am wanting to unrestricted my scooter. But i only have 4 cables instead of 5 and i am not sure what one to cut.
http://i.imgur.com/XbwGzRr.jpg
Unless i buy a derestricted cdi. If you suggest this can you please link me to one.
Big Dog
22nd August 2015, 17:31
Most 4 stroke scooters are limited by far less technical means.
Usually a washer in between the muffler and the header.
Sent via tapatalk.
FJRider
22nd August 2015, 17:31
Just find a steeper hill ...
Big Dog
22nd August 2015, 18:02
Just find a steeper hill ...
I found eating less pies made more of a difference on my 110.
Sent via tapatalk.
unstuck
22nd August 2015, 18:37
You could cut them all, one at a time until the desired result is achieved.:niceone:
Akzle
22nd August 2015, 18:44
do it faggot
http://s-charger.com/
FJRider
22nd August 2015, 18:44
You could cut them all, one at a time until the desired result is achieved.:niceone:
Cut them all ... and push it over a clif.
Desired result achieved ... it will go (albeit fall) faster than it had ever done before ...
unstuck
22nd August 2015, 18:48
Cut them all ... and push it over a clif.
Desired result achieved ... it will go (albeit fall) faster than it had ever done before ...
Preferably Cliff Curtis............Don't like that dude.:shifty:
Vymur
22nd August 2015, 18:56
Most 4 stroke scooters are limited by far less technical means.
Usually a washer in between the muffler and the header.
Sent via tapatalk.
Possible if you could link me to a video or a post about this?
FJRider
22nd August 2015, 19:00
Possible if you could link me to a video or a post about this?
http://www.kiwibiker.co.nz/forums/showthread.php/37936-Hi-and-derestricting-SJ50QT
unstuck
22nd August 2015, 19:01
Have you tried putting an extra washer in the variator?
FJRider
22nd August 2015, 19:07
I am wanting to unrestricted my scooter. But i only have 4 cables instead of 5 and i am not sure what one to cut.
Have you considered that the mod has already been done ... ???
Note the insulation tape holding the wires together in the loom.
And the reason it wont go that fast ... is because it's (already) fucked.
AllanB
22nd August 2015, 19:08
Change the turn signal oil - usually performs better after that.
FJRider
22nd August 2015, 19:12
Change the turn signal oil - usually performs better after that.
Getting a Yellow powerband is cheaper .. <_<
unstuck
22nd August 2015, 20:26
Ignore all the bastards that are jealous they dont own a scooter. :shifty:
http://www.sc-ooter.50megs.com/derestriction.htm Have a go at your variator, could get some more out of the shi....... oops scooter.:Punk:
Big Dog
22nd August 2015, 21:02
Possible if you could link me to a video or a post about this?
Pretty simple. Unbolt your muffler. There will be a washer in there if this is the case. If so, take it out. Job done.
You have legally converted your moped to a motorcycle and now require a wof, a motorbike reg and a class six to operate on a road.
Sent via tapatalk.
Big Dog
22nd August 2015, 21:05
Why do so many bikers have mopeds as well?
Sometimes it's nice to feel the wind in your vagina.
Sent via tapatalk.
mossy1200
22nd August 2015, 23:28
Why do so many bikers have mopeds as well?
Sometimes it's nice to feel the wind in your vagina.
Sent via tapatalk.
Im still ok?
Mine was marketed as a Booter Bike/Scooter. Leg each side with a petrol tank to prevent said breeze.
kezzab
16th September 2015, 08:43
Hello,
I just recently got a SJ50QT and i am wanting you do some mods to make it faster.
I am wanting to unrestricted my scooter. But i only have 4 cables instead of 5 and i am not sure what one to cut.
Unless i buy a derestricted cdi. If you suggest this can you please link me to one.
What you are holding in your hand is the starter relay, not the CDI. The CDI is up the front near the indicator clicker and regulator.
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.