7.48mm Shim swap in Auckland

[imthatguy]

As mentioned in previous post Im currently doing the valve clearances on my ZXR400H engine and Ive finished checking the valves, as follows:

EX: [0.178 || 0.178],[0.229 || 0.178],[0.279 || 0.152],[0.203 || 0.254]
IN: [0.229 || 0.178],[0.203 || 0.229],[0.229 ||0.203],[0.178 || 0.178]

If anyone has shims I would be able to swap with that would be great, happy to pass some cash along too as long as your not looking for too much.

Located east auckland but can travel!

[sidecar bob]

Do you need thicker ones, or thinner? Usually thinner in my expierence.
Have you done the maths to work out what you need & how many clearances can you make correct by juggling what you have?