Honda Bros 650 opinion needed

[jiu claw]

i have a honda bros 650 up on trade me $3500 is the asking price i brought it from here. done some mod's its got a worn output shaft i did the evil of tac welding the front sprocket. you cant buy oem countershafts anymore. and i need to move on. (looking for a nice bonnie) back to the bros,, your opinion is needed price wise please. its work to fix the problem. the chain and sprockets were new and done less than 5k someone would get some fun for a while. heres the listing. http://www.trademe.co.nz/motors/motorbikes/motorbikes/sports/auction-1053505802.htm

[skippa1]

i have a honda bros 650 up on trade me $3500 is the asking price i brought it from here. done some mod's its got a worn output shaft i did the evil of tac welding the front sprocket. you cant buy oem countershafts anymore. and i need to move on. (looking for a nice bonnie) back to the bros,, your opinion is needed price wise please. its work to fix the problem. the chain and sprockets were new and done less than 5k someone would get some fun for a while. heres the listing. http://www.trademe.co.nz/motors/motorbikes/motorbikes/sports/auction-1053505802.htm


You should have put your butcher repair in the advert, you have a moral obligation to do so
it is not in excellent condition, it has a butchered front sproket
tack welding any part of a gearbox or engine can cause arching between bearings and or gear faces which can cause other issues
i would be expecting a shit load of fun from $3500, more than you are likely to get from this
have a look on trade me at what you can buy for that money

[Akzle]

i have a honda bros 650 up on trade me $3500 is the asking price i brought it from here. done some mod's its got a worn output shaft i did the evil of tac welding the front sprocket. you cant buy oem countershafts anymore. and i need to move on. (looking for a nice bonnie) back to the bros,, your opinion is needed price wise please. its work to fix the problem. the chain and sprockets were new and done less than 5k someone would get some fun for a while. heres the listing. http://www.trademe.co.nz/motors/motorbikes/motorbikes/sports/auction-1053505802.htm

five buck and a bag of chips

[Mike.Gayner]

Totally agree with skippa, unbelievable that you wouldn't disclose your shitty repair job in the ad. Either fix it properly or disclose the issue. In either case it isn't worth $3,500.

[TheDemonLord]

This Thread....

It gunna be gud.

[nzspokes]

If it has a welded counter shaft then you need to sell it as a wreck. Its worthless now.

[5150]

i have a honda bros 650

There is your first problem.....:facepalm:

[caspernz]

There is your first problem.....:facepalm:

These came with an OEM balaclava didn't they?

Only thing funny about the TM ad is the expiry date of April 1st...

The OP will get his reality check soon enough :brick:

[5150]

These came with an OEM balaclava didn't they?


And a condom.......<_<

[jiu claw]

thanks fellas thats what i wanted some honest opinions. ill lower the price with the welded front sprocket. with a new warrant and rego i know it wont sell but its worth a crack. go buy myself another bike without a worn countershaft.

[Akzle]

which jew cnut gave it a warrant?

[jiu claw]

which jew cnut gave it a warrant? what makes you think it wont get a warrant?

[Akzle]

a fucked 30 year old bike for 2.5g
who could afford not to?

What did you pay for it, 3? Then you fucked it.

In the words of meseur kerrigan...
Maaaaaaate, yer dreeeamin.

[Akzle]

what makes you think it wont get a warrant?

you've presumably welded (poorly) a part that is presumably designed to have an interference fit and shear key.
Science not your stong point eh?

[jiu claw]

a fucked 30 year old bike for 2.5g
who could afford not to?

What did you pay for it, 3? Then you fucked it.

In the words of meseur kerrigan...
Maaaaaaate, yer dreeeamin. i paid 2750 and brought it from one of the members here with a fucked countershaft who couldnt be honest with me. who do you think is losing??

[Akzle]

maybe i make too many assumptions and you had it professionally "tac" welded :whistle:

[Akzle]

i paid 2750 and brought it from one of the members here with a fucked countershaft who couldnt be honest with me. who do you think is losing??

sounds like you.

But srsly, what did you do that added 750 buck value to the bike?

I'd name and shame that homo, too.

[jiu claw]

maybe i make too many assumptions and you had it professionally "tac" welded :whistle:
i paid for the weld id call the guy a pro welder. but it still dont make it right to weld it. but its all i could do.

[jiu claw]

sounds like you.

But srsly, what did you do that added 750 buck value to the bike?

I'd name and shame that homo, too. i put a brand new nitron r1 shock on it. its a few weeks old 1100 from kss. supertrapp 600 few other good mods. i could always wreak it and get a few bucks for the parts. i dont drop names a dont care to much for narcs myself. i just learnt i need to be a bit more wise when buying 2nd hand.

[bogan]

Without the welded sprocket you'd be worth 3k+ to the right buyer. With that however, rings the shit out of some alarm bells. Good luck getting 2k for it.


There is your first problem.....:facepalm:

Cunt, I will fight you... :chase:


These came with an OEM balaclava didn't they?

and you...


And a condom.......<_<

that's probably a fair call though :bleh:

[nzspokes]

i paid for the weld id call the guy a pro welder. but it still dont make it right to weld it. but its all i could do.

So you paid somebody to wreck the bike? I would have wrecked it for free.

[jiu claw]

Without the welded sprocket you'd be worth 3k+ to the right buyer. With that however, rings the shit out of some alarm bells. Good luck getting 2k for it.



Cunt, I will fight you... :chase:



and you...



that's probably a fair call though :bleh: yeh i know im fucked. i see jd hord is still working on a countershaft that may fit. but i cant spend anymore on it bogan.

[bogan]

yeh i know im fucked. i see jd hord is still working on a countershaft that may fit. but i cant spend anymore on it bogan.

Yeh, chalk it up to live and learn I guess.

[Akzle]

i put a brand new nitron r1 shock on it. its a few weeks old 1100 from kss. supertrapp 600 few other good mods. i could always wreak it and get a few bucks for the parts. i dont drop names a dont care to much for narcs myself. i just learnt i need to be a bit more wise when buying 2nd hand.

wouldnt that have been better spent, perhaps having a "custom" shaft machined?

Its not about snitching, if someones been a cunt, it's right they should a) settle it or b) be called out on it.

[BuzzardNZ]

https://www.youtube.com/watch?v=7yu0T9n5uos

[jiu claw]

wouldnt that have been better spent, perhaps having a "custom" shaft machined?

Its not about snitching, if someones been a cunt, it's right they should a) settle it or b) be called out on it.
dont wory i hit him up. he said what any asshole would.. i didnt know you could get a shaft machined up ive asked all the wrong people i guess even the local honda shop said they couldnt help hahaha fucken joke.

[nzspokes]

Well that was hard to work out. ;)

http://www.kiwibiker.co.nz/forums/showthread.php/168847-Honda-650-Bros

[local]

Hardly naming and shaming if the guy's entire post history consists of peddling his broken shaft mobile. :pinch:

[Akzle]

jaaaaaaa.
While technically a member when you sign up (teehee), i'd say you're not reeeeeeaaaally a member (teehee) until nodrog offers you secks.

[Big Dog]

jaaaaaaa.
While technically a member when you sign up (teehee), i'd say you're not reeeeeeaaaally a member (teehee) until nodrog offers you secks.
By your standard after > 13 years I am still not a member.

Sent via tapatalk.

[Akzle]

By your standard after > 13 years I am still not a member.

Sent via tapatalk.

*or actually had secks with you

[5150]

jaaaaaaa.
While technically a member when you sign up (teehee), i'd say you're not reeeeeeaaaally a member (teehee) until nodrog offers you secks.

I hope he wears a condom, or at least settles for a blowjob.....