Who rebuilds cranks?

[aff-man]

So I have managed to come into position of an ns400r. Unfortunately it came out from under a house with the motor in bits..

Apparently the bottom end has gone but cant be sure, so the question is who is out there that can asses and repair the crank?

Cheers

[jellywrestler]

So I have managed to come into position of an ns400r. Unfortunately it came out from under a house with the motor in bits..

Apparently the bottom end has gone but cant be sure, so the question is who is out there that can asses and repair the crank?

Cheers

pete sales

[F5 Dave]

+1 for Pete at Total in PN

But you will have to do some research. Various bits are not available from Honda. Find ns400 forum perhaps.

[actungbaby]

So I have managed to come into position of an ns400r. Unfortunately it came out from under a house with the motor in bits..

Apparently the bottom end has gone but cant be sure, so the question is who is out there that can asses and repair the crank?

Cheers

You got great find there i have ns 250 r similar to yours but a twin,

Guy in uk makes parts for ns 400r and 250 more the 400 though. he,s on

http://www.nsr250.net/forums/viewforum.php?f=24&sid=bc29a1ec565c1fa4808f336e49e68e32

read those your find where answered me . even offered me two ns 250 r pistons

But missed out on them as didnt see my email aghhh. from him till was mnths

later.

good to hear about peter sales never got around to finding him. will know.

i been looking for past few years pistons are aviable also.

nzcylinders for replating barrells .
http://www.ns400r.co.uk/forum/index.php
this site i am on not that much traffic though.
http://www.nsr250.net/forums/index.php

https://www.davidsilverspares.com/NS400R/

this guy sells redone cranks or rebuilds yours.

also has forks seals and lots of new bits.

also does a 475. cc complete engine kit,

guy on nsr250.net does carb boots he makes new.

need more info let me know . i have wirring diagrams

for ns 250 r theres onlly few diffrence to the 400.

Know a Guy that has a ns 400r and knows about them.

keep us posted how you get on. my ns 250 heads are off.

you very rearly see much on ebay just 0ne or two listings all ways there

new body work reolica in fibre glass is aviable too .i have seen orginal abs

Panel parts occasinally on ebay do a saved serch on ns 400 r parts

need two new piston pins and one con road bearing.


I have seen ns 250 and 400 cranks on ebay crazy prices though same guy

trying sell them 2 years know. 1,400 or so .

[F5 Dave]

Head out hwy56. There's a gravel\sealed driveway to the left just before you get to a bridge over the river and a bit of a sign. He used to be in town.

[actungbaby]

Head out hwy56. There's a gravel\sealed driveway to the left just before you get to a bridge over the river and a bit of a sign. He used to be in town.

Thanks for that i been out few times never found it.

was going have look other day when was in levin .

Thanks dave yes somone told me the bridge thing.
but your advice bit more compete ;-)

[F5 Dave]

Try googlemaps. I just kind of chance on it when I'm up that way but its not hard.

[jellywrestler]

https://www.google.co.nz/maps/place/Rangiotu+4477/@-40.4235871,175.4473911,409m/data=!3m1!1e3!4m5!3m4!1s0x6d405072a20701d5:0x500ef 6143a329b0!8m2!3d-40.421322!4d175.4351341

it's got the test track in the yard.

[aff-man]

Crank is with Brett Roberts... now if only i could source the super rare parts hahaha

I have a cunning plan in the works though

[Askor]

Crank is with Brett Roberts... now if only i could source the super rare parts hahaha

I have a cunning plan in the works though

Does your cunning plan involve adapting other parts of the Honda variety to a certain rear area :msn-wink:

Small world eh

[actungbaby]

Crank is with Brett Roberts... now if only i could source the super rare parts hahaha

I have a cunning plan in the works though

Flaming honda your not joking i took the con rod bearing to

skc they had none width wise within 10 mm

can you let me know how you get on whould be appricated.

I need one cylider rear re plated and fixed .

surley Other pistons from other models or even brands whould be similar.

I never delt with 2 strokes before . i got two pistons know so all set but.
am thinking piston rings do wear out. i dont want build this thing spend
money to have it useless again. am not going race , it. but seems
only starts to work around 8,000 rpm range (thats the ns 250 r )

[actungbaby]

https://www.google.co.nz/maps/place/Rangiotu+4477/@-40.4235871,175.4473911,409m/data=!3m1!1e3!4m5!3m4!1s0x6d405072a20701d5:0x500ef 6143a329b0!8m2!3d-40.421322!4d175.4351341

it's got the test track in the yard.

blimey cool i seen enough times when worked in carpark pns
his van he was in town then though .
Thanks for google map thing