PDA

View Full Version : GSXR 600 Cat Dump


The Lone Rider
11th September 2016, 21:52
Client cut off the cat box off the bottom of his bike. Something about the later years being more interchangeable, but not his.

Anyway, he had an after market muffler and a bike with header pipes.

My job was to make it all work together.

Just a brief photo collage I'll do over next day or so.


Start with photos of new flanges I machined to convert each end to the suitable diameter of piping I was going to use

https://scontent.fakl1-1.fna.fbcdn.net/v/t1.0-9/14089144_1052363261526325_531499895727897229_n.jpg ?oh=fbc6f18ff1477933fb5944b0239334a5&oe=584495A9
The Lone Rider
12th September 2016, 18:48
Here's the new piping, all welded and finished work completed

https://scontent.fakl1-1.fna.fbcdn.net/v/t1.0-9/14222259_1052363288192989_1254873246233601095_n.jp g?oh=5fd9babdd599cc8fd9a55b1eea6842ec&oe=58411ABD
nodrog
12th September 2016, 20:08
I thought sidecar racers were rough.
The Lone Rider
13th September 2016, 18:38
Coated and mounted

https://scontent.fakl1-1.fna.fbcdn.net/v/t1.0-9/14355558_1053434938085824_1903397579674209614_n.jp g?oh=67962551fedc1f2c8acde617583d5c04&oe=587C57A1
The Lone Rider
14th September 2016, 18:23
Different view

https://scontent.fakl1-1.fna.fbcdn.net/v/t1.0-9/14322567_1053434948085823_1680369100117929403_n.jp g?oh=cc7d316a7ea19bcc59bc53b80e082335&oe=58833691
sugilite
15th September 2016, 03:22
Nice work! :yes:
Maha
15th September 2016, 08:16
I thought sidecar racers were rough.

Only with each other Aunty...:confused:
The Lone Rider
15th September 2016, 18:50
Finished result

https://scontent.fakl1-1.fna.fbcdn.net/v/t1.0-0/s480x480/14329898_1054168521345799_5815056859956887652_n.jp g?oh=98a006705282cde726ef90e784b19124&oe=5879F931
AllanB
15th September 2016, 20:06
Customer happy? All that counts. :-)
hayd3n
15th September 2016, 23:08
the pipe work is reasonably tidy, not sure on the can tho is that a dan moto?
nzspokes
15th September 2016, 23:10
the pipe work is reasonably tidy, not sure on the can tho is that a dan moto?

Yerp, may as well have a straight through pipe.
hayd3n
15th September 2016, 23:12
Yerp, may as well have a straight through pipe.

my two brothers is bad enough 127db eek
AllanB
15th September 2016, 23:42
my two brothers is bad enough 127db eek

Ouch!!!! I've just received a db meter from the interweb. On the assumption it is accurate out of interest I'll check my Ducati this weekend.

127 - that is loud! 2 Bros do a end cap reducer thingy - I doubt that will get them under a hundy though.
hayd3n
15th September 2016, 23:52
Ouch!!!! I've just received a db meter from the interweb. On the assumption it is accurate out of interest I'll check my Ducati this weekend.

127 - that is loud! 2 Bros do a end cap reducer thingy - I doubt that will get them under a hundy though.

not for my one . it has a cast tip and is oddly shaped i have a good wof man and earplugs lol