Eddieb
17th March 2017, 14:43
Want to see what what numbers you bike makes? Made some mods to your bike and want to see if it’s running at it’s optimum? Come along to our Auckland Dyno Day and find out.
The Dyno day will be held at BRM Motorcycles, located at 12F Kaka street, Otahuhu, starting at 10am. There will be 3 dyno runs per hour and each dyno run will cost $60 payable on the day directly to BRM, so if you have a baseline run then make some adjustments while other bikes are being done and then do a 2nd run, that’s $120.
Road orientated rear tyres are highly recommended as knobblies slip on the roller and don’t give accurate HP readings. Jetting improvements can still be made however as this doesn’t affect AFR reading.
http://www.adventureridingnz.co.nz/forums/topic/auckland-dyno-day-saturday-march-25th-2017/
The Dyno day will be held at BRM Motorcycles, located at 12F Kaka street, Otahuhu, starting at 10am. There will be 3 dyno runs per hour and each dyno run will cost $60 payable on the day directly to BRM, so if you have a baseline run then make some adjustments while other bikes are being done and then do a 2nd run, that’s $120.
Road orientated rear tyres are highly recommended as knobblies slip on the roller and don’t give accurate HP readings. Jetting improvements can still be made however as this doesn’t affect AFR reading.
http://www.adventureridingnz.co.nz/forums/topic/auckland-dyno-day-saturday-march-25th-2017/