Exhaust header gaskets

[globe]

Do I need to use steel/copper that you get from the manufacturers/workshops or can I use ones you can get from Supercheap etc?

Have taken the header pipes off an old GN250 and want to replace the gaskets (I am assuming none were on there in the first place unless they are really jammed in there and you cannot get them out easily)

Oh, based in AKL on the shore if that is of any use....cheers

[jellywrestler]

why not go to your suzuki dealer?

[globe]

Thats plan no.1 If they dont have them in stock was hoping I could get them straight by going to one of them other shops, generation need it yesterday

[jellywrestler]

generation need it yesterday
so yesterday you googled the part number, emailed a query to your local dealer and should have had a reply by now?

[jellywrestler]

what's the dimensions?

[globe]

what's the dimensions?

I'm pretty sure its these http://www.moto1.nz/vesrah-14181-03310-37d00-exhaust-gasket-30-35-ve3001

Its 2007 GN250 but on the parts numbers websites the years seem to stop in the early 2000's.

[jellywrestler]

quite likely your dealer will have some in stock, if not then they will get them, saves buying 10 at a time, us price is $4.97 each, generally suzuki nz are close to that, or maybe cheaper if they on sell the aftermarket type.
learn to sort this stuff today and next time you're not here getting spoonfed or maybe advising others...


Part # = 14181-03310
Part Description = GASKET,EXHAUST PIPE
Model Count = 43
DR250D 1983 250 DR250 DUAL PURPOSE
DR250SZ 1982 250 DR250S DUAL PURPOSE
DR250Z 1982 250 DR250 DUAL PURPOSE
FA50D 1983 50 FA50 SHUTTLE MOPED
FA50E 1984 50 FA50 SHUTTLE MOPED
FA50F 1985 50 FA50 SHUTTLE MOPED
FA50G 1986 50 FA50 SHUTTLE MOPED
FA50H 1987 50 FA50 SHUTTLE MOPED
FA50J 1988 50 FA50 SHUTTLE MOPED
FA50K 1989 50 FA50 SHUTTLE MOPED
FA50L 1990 50 FA50 SHUTTLE MOPED
FA50M 1991 50 FA50 SHUTTLE MOPED
FA50T 1980 50 FA50 SHUTTLE MOPED
FA50X 1981 50 FA50 SHUTTLE MOPED
FA50Z 1982 50 FA50 SHUTTLE MOPED
FS50T 1980 50 FS50 SCOOTER
FS50X 1981 50 FS50 SCOOTER
FZ50D 1983 50 FZ50 SCOOTER
FZ50K 1973 50 FZ50 SCOOTER
FZ50N 1979 50 FZ50 SCOOTER
FZ50T 1980 50 FZ50 SCOOTER
FZ50X 1981 50 FZ50 SCOOTER
FZ50Z 1982 50 FZ50 SCOOTER
GN250D 1983 250 GN250 STREET
GN250F 1985 250 GN250 STREET
GN250J 1988 250 GN250 STREET
GN250Z 1982 250 GN250 STREET
GS550B 1977 549 GS550 STREET
GS550C 1978 549 GS550 STREET
GS550EC 1978 549 GS550E STREET
GS550ET 1980 549 GS550E STREET
GS550LN 1979 549 GS550L STREET
GS550LT 1980 549 GS550L STREET
GS550LX 1981 549 GS550L STREET
GS550LZ 1982 549 GS550L STREET
GS550MZ 1982 549 GS550M KATANA STREET
GS550N 1979 549 GS550 STREET
GS550TX 1981 549 GS550T STREET
LT250EF 1985 250 LT250E QUADRUNNER ATV
LT250EFF 1985 250 LT250EF ATV
LT250EFG 1986 250 LT250EF ATV
LT250EG 1986 250 LT250E QUADRUNNER ATV
X5214F UK UK X5214F UK

[AllanB]

Took the pipe off to wrap it did we?

[caspernz]

Took the pipe off to wrap it did we?

I'm picking a few of us thought the same :rolleyes:

[Honest Andy]

There's the answer! Forget the gaskets, just use a bit of the offcut wrapping! There's probably heaps left over... :done:

[F5 Dave]

Don't forget to pick the old ones out. Looking with a torch and they will be there just compressed to uselessness.

[Autech]

Don't forget to pick the old ones out. Looking with a torch and they will be there just compressed to uselessness.

Then let the rego lapse and chuck it up on facebook as a failed bobber project.

[Honest Andy]

Prapps akzlle would buy it to add to his collection of gn doer-uppers...?