Kawasaki KR150A CDI what the hell does it look like. And where can i get one?

[Drenai Knight]

I have searched the interwebs long and hard and the only pics that come up are of this CDI
339875339874
that obviously does not fit the A model so what does it look like and where can i buy one. also here is a pic of my loom if anyone can tell me where it should be. Cheers.

339876

[fridayflash]

have you got a complete bike thats missing the cdi? ive got a mate with at least one kr150 ..he might have some bits too
is your the watercooled or aircooled model?

[Drenai Knight]

have you got a complete bike thats missing the cdi? ive got a mate with at least one kr150 ..he might have some bits too
is your the watercooled or aircooled model?

It is a water cooled model. Its pretty much all there it just had all the electrics and wiring missing i got a hold of just about every thing now bar a cdi unit.
339881

[release_the_bees]

That picture brings back memories. My first bike was that exact model and colour.

Sent from my SM-G930F using Tapatalk

[Drenai Knight]

That picture brings back memories. My first bike was that exact model and colour.

Sent from my SM-G930F using Tapatalk

Its been built up from a bunch of bikes so it might be possible there's a bit of your old bike on it.

[fridayflash]

ive asked the mate about the cdi, will let you know when i hear back. you gonna make a racebike out of it?

[Drenai Knight]

ive asked the mate about the cdi, will let you know when i hear back. you gonna make a racebike out of it?

A road legal one hopefully.

[malcy25]

Try www.importmonster.com.au

[husaberg]

I have searched the interwebs long and hard and the only pics that come up are of this CDI

that obviously does not fit the A model so what does it look like and where can i buy one. also here is a pic of my loom if anyone can tell me where it should be. Cheers.


I just went through this parts Fiche
I cant find it although he might not have scanned it?

http://kawasakispareparts.com.my/index.cfm?do=catalogue&viewc&id=1069
Looking at the Parts Fiche it looks like the V force reed valve for the KDX200 will fit as it looks like the KR1 intake
The Griffith boys had a KR150 they built a bucket out of it. not sure if the used the original ignition or not.

Bump

https://youtu.be/ZxGLuy2SJ2s
Get your bro to make you one of these.


yes , just turned the computer on and yes he was saying some nice stuff (-; regan first but soon changed that lol , yer dont know why the doctor never brings it up , must not like me

https://youtu.be/ZxGLuy2SJ2s
Get your bro to make you one of these.


Nice one, as always. 20 in just over 5 years, not a bad effort.

[Drenai Knight]

Im thinking of grafting one of these on but i still need to find out what the wires are on the loom.

339888339889

[husaberg]

Im thinking of grafting one of these on but i still need to find out what the wires are on the loom.

339888339889

Try Matt at Tyga ask on the ESE thread if he has any wiring diagrams for both models
https://www.kiwibiker.co.nz/forums/showthread.php/86554-ESE-s-works-engine-tuner/page2071

Manual here
https://www.google.com/search?q=wiring+diagram+KR150&rlz=1C1GGRV_enNZ810NZ811&tbm=isch&tbo=u&source=univ&sa=X&ved=2ahUKEwj86aSQhaPfAhXJF3IKHdBmClAQsAR6BAgDEAE&biw=1920&bih=969#imgrc=1i8lmZvHSwoieM:
One model herehttp://2.bp.blogspot.com/-4q6fIgA-JhQ/TgJ2jWBUBWI/AAAAAAAAAE8/QeuvhmntPQg/s1600/CDI%2BNINJA%2BR.bmp

[Drenai Knight]

Try Matt at Tyga ask on the ESE thread if he has any wiring diagrams for both models
https://www.kiwibiker.co.nz/forums/showthread.php/86554-ESE-s-works-engine-tuner/page2071

Manual here
https://www.google.com/search?q=wiring+diagram+KR150&rlz=1C1GGRV_enNZ810NZ811&tbm=isch&tbo=u&source=univ&sa=X&ved=2ahUKEwj86aSQhaPfAhXJF3IKHdBmClAQsAR6BAgDEAE&biw=1920&bih=969#imgrc=1i8lmZvHSwoieM:
One model herehttp://2.bp.blogspot.com/-4q6fIgA-JhQ/TgJ2jWBUBWI/AAAAAAAAAE8/QeuvhmntPQg/s1600/CDI%2BNINJA%2BR.bmp

Thanks but There are more than two models and pretty much all have different wiring looms here's an example
339916339917339915
Nether are the same as mine and i have yet to find anymore diagrams.The R models one helped out a little but i still don't have the full picture of whats what.

[husaberg]

Thanks but There are more than two models and pretty much all have different wiring looms here's an example
339916339917339915
Nether are the same as mine and i have yet to find anymore diagrams.The R models one helped out a little but i still don't have the full picture of whats what.


The Color Coding will be the same for the wires though. So you should be able to figure out what does what and if they can be substituted
A i said ask Matt he lives in the area where they were created he may even be able to help you out with a replacement CDI

The other thing you may not are considered is there may well be a mini loom that conects what you have as a connector to the CDI.

[Yow Ling]

message Valdi Gunawan at Joe Class Racing, he has pretty much everything for KR150's, you can find him on Facebook, he is based in Indonesia