Log in

View Full Version : where to buy heim joint?


tigertim20
15th December 2018, 15:22
anyone know who stocks these in NZ?

Need an M8, left hand thread preferably with a 6mm hole, but can make a bushing if eye hole is bigger.

aftermarket rearsets dont match the thread size on quick shifter shift rod:(
F5 Dave
15th December 2018, 15:27
I have some m6 male LHT, 8 is big. LHT can be hard to find.
buggerit
15th December 2018, 15:45
Comac have them, LH and RH thread, section F in catalogue (they list them as rod ends)
good luck
husaberg
15th December 2018, 16:39
https://www.bearingandengineering.co.nz/shop/BEARINGS/Spherical+Plain+Bearings/Rod+End.html
https://cardwells.co.nz/rod-ends.html
https://johnbrooks.co.nz/bearings/rod-ends
http://www.aucklandbearings.co.nz (https://johnbrooks.co.nz/bearings/rod-ends)

I am picking race suplies in your home town will have them as well
tigertim20
15th December 2018, 16:59
comac had some but also found bearingandengineering.co.nz had them for reasonable price too
Old Steve
18th December 2018, 13:28
Try SAECOPrecision or SAECOWilson. They'll know them as rod ends. You my need to sleeve an 8mm one down to 6mm hole though. I always used ones fitted with a grease nipple too.
tigertim20
18th December 2018, 16:04
Try SAECOPrecision or SAECOWilson. They'll know them as rod ends. You my need to sleeve an 8mm one down to 6mm hole though. I always used ones fitted with a grease nipple too.

Arrived today.

Yup, it will need sleeved down, I can whizz something up for that, that easy!

Shit I never even thought to ask race supplies