PDA

View Full Version : nasty little italian two strokes


jim.cox
19th May 2023, 16:42
Gentlemens

I am seeking advice for a starter motor

It is for an Italian 200cc 2 stroke motor

Looks like a stock part

Anyone recognise the code "SJCE" ?

It has about a 55mm bolt spacing

I need new brushes.

Thanks

=J=
.
Kickaha
19th May 2023, 17:29
It is for an Italian 200cc 2 stroke motor



What brand ?


These guys used to have all sorts of shit in their old place https://wipers-nz.co.nz/contact-us/
jellywrestler
19th May 2023, 17:47
Gentlemens

I am seeking advice for a starter motor

It is for an Italian 200cc 2 stroke motor

Looks like a stock part

Anyone recognise the code "SJCE" ?

It has about a 55mm bolt spacing

I need new brushes.

Thanks

=J=
.

what era might help
jim.cox
19th May 2023, 18:15
what era might help

this millennium

specialist application

I'm thinking maybe match a scooter of some sort?

(I'd sort a photo if I could - working on that)
pete376403
19th May 2023, 18:33
What are the dimensions of the brushes? Are they like most appliance brshes, a rectangle of carbon with a braided lead and a spring, all retained by a cap? You could possibly find something close from an electric drill or other tool, and file them to size.
jim.cox
19th May 2023, 19:10
What are the dimensions of the brushes? Are they like most appliance brshes, a rectangle of carbon with a braided lead and a spring, all retained by a cap? You could possibly find something close from an electric drill or other tool, and file them to size.

Good thinking

Unfortunately one of the springs is gone

Which is probably the reason for failure

New brush kit is the easy way to go

TradeMe shows nothing that matches

Looks like I may have to ship some in myself...
jellywrestler
19th May 2023, 19:26
Good thinking

Unfortunately one of the springs is gone

Which is probably the reason for failure

New brush kit is the easy way to go

TradeMe shows nothing that matches

Looks like I may have to ship some in myself...

any automotive electrician should be able to point you in the right direction
F5 Dave
19th May 2023, 20:25
MWAHAHAHA!


Dance Monkey. DANCE!
jim.cox
20th May 2023, 06:28
That's the one Dave.

Any idea what yours was fitted to?

Online, I found a brush kit in the US - but they wont ship to NZ :(
F5 Dave
20th May 2023, 10:34
Its lightly fitted to my bench presently. Got to be worth $700-800 to get that motor rolling.:msn-wink:
husaberg
20th May 2023, 11:20
https://www.youtube.com/watch?v=G3dFpQzu54w
pete376403
20th May 2023, 12:52
That's the one Dave.

Any idea what yours was fitted to?

Online, I found a brush kit in the US - but they wont ship to NZ :(

www.Shipito.com and similar set you up with a US address and then send it on. There is a cost of course but if you really want something...
F5 Dave
20th May 2023, 14:12
I was just going to send it for postage.

I'll see if it works. No reason it shouldn't, came off a low mileage Derbi 50 engine I bought near 20 years ago. Was too good to throw away.
F5 Dave
20th May 2023, 17:03
Yeah it spins up ok on a 6v battery I had to hand so should zing on 12v
F5 Dave
22nd May 2023, 07:27
So PM us your address if you want it.