Speedo help

[noclass]

Anyone know how to de-restrict the speedo governor on a zxr250c?
Prefer to know before I take it out to have a fiddle.:2thumbsup

[Sketchy_Racer]

easy just disconnect your speedo cable, if are wanting to get past the speed restricter you have no need to know how fast you are going, right??

[Sketchy_Racer]

oh and welcome to the site :)!!

[John]

open the speedo and look at the govern mechanism, its basicly a tab that trips a infared trip, simple fix, bend the tab so it doesnt trip it or do the lazy way like me, and rip the speedo out, shove the restricter in a little black box (taping the tab so it doesnt move) and putting a zxr400 speedo on.

You will know if it worked or not because if you screw up it will run like you are on 2 cylinders at around 14k then it will die at 16k, this is just the cdi safety kicking in. Have fun.

[noclass]

Great, thanks for those replies, I was told about the "tab" at the back, just wanted to confirm before attempting anything.
And the option of disconnecting the speedo is a pretty good idea.
Really annoyed me on the east-west sprint weekend when the governor keep kicking in on the flying mile runs. As you can guess, nothing over 180km were recorded, from memory, best avg was around 178?

[few]

mmmm 178 may be as fast as the poor old kawa can go lol :dodge:

Does anyone know when the results for the sprints will be posted?