Wtd: Towbar carrier plans.

[Racey Rider]

I have seen on Trademe this Towbar mounted motorbike carrier.

I would like to get one made up for my KR150.

Has anyone used one/seen one/ have plans on good ways to make one?

This one in pic seems to have a bar that comes over the seat to support the bike.

[skidMark]

i know you can get them for mini motox's ill take pics of one and measurements if i can and then you could probably just scale it up

[Motu]

Trials riders have used them for years,go to a trials meeting and you'll see a few to get ideas from.Check out this thread on Thumper Talk about trailer hitches,follow the links.http://www.thumpertalk.com/forum/showthread.php?t=253402&parentpage=5

I'm thinking about making one for my Pajero to take my trials bike and trail bike,I like the look of that tilting alloy one....there was one on TradeMe a few months ago,went for $500,a bit steep for me at the time.Have a good look at your towbar and if it's a good one it will have max tongue weight stamped on it.My Pajero has 100kg tongue weight,the TLR200 weighs less than that,the DT230 20 or 30kg more,so it should take it.Bear in mind those Yank tanks with a Class III hitch take 5000lbs,they are a million times stronger than anything we make here.

[racerleo]

You know it would cost you a lot less cash and time if you just brought the one off trademe. 200 bucks sounds like a pretty good deal...... I might be a little bit bias though being the one who is selling it. But honestly by the time you pay for steel, wiring looms, paint etc you would'nt really be saving any money.

[pete376403]

There is one laying behind my garage that used to carry my speedway bike. Would need a bit of modification for anything else as speedway bikes use a 2.75 front tyre. They are about the same length as a smallish 150 though. If anyone wants it, they can have it. Im in Upper hutt

[Racey Rider]

That sounds like a bit of me Pete. Merry Christmas to ya! :hug:

Will PM you.

[pete376403]

OK, anyone from Wellington going to Wanganui races who could take this up?
Obviously going to need a car or van. It bolts in place of the towball, doesn't project out beyond the side of a reasonable size car (I used it on an XE Falcon) and doesn't require lights as it doesn't obscure the car ones.
RR can you get it from Wanganui to NP?
Alternatively I'll measure and weigh it and see what it would cost to freight to NP.

[Racey Rider]

K14 has offered to bring this towbar carrier from Wanagnui to NP for me.
So is there anyone that can pick it up from Pete (Upper hutt) and pass on to K14 (RS125 #14 in F3) in the pits on Boxing day?
Cheers.
Racey.

[Kendog]

Hey Racey,
How big is this thing, we are going through in the cage, but car is not too large, will it fit in boot or back seat? Anyway it could be dropped off in Newlands?

[Racey Rider]

Thanks for the offer. Should fit in car easily, but probley a bit late to organize now.
Will see if I can get it up here in the new year.
Cheers.
Racey.

[jazzdive101]

You know it would cost you a lot less cash and time if you just brought the one off trademe. 200 bucks sounds like a pretty good deal...... I might be a little bit bias though being the one who is selling it. But honestly by the time you pay for steel, wiring looms, paint etc you would'nt really be saving any money.

Do you still have this a carrier for sale please?

[jazzdive101]

There is one laying behind my garage that used to carry my speedway bike. Would need a bit of modification for anything else as speedway bikes use a 2.75 front tyre. They are about the same length as a smallish 150 though. If anyone wants it, they can have it. Im in Upper hutt


Hi,

Is this still available?

Cheers.

[hayd3n]

Hi,

Is this still available?

Cheers.

umm try giving him a pm !!!

[orangeback]

make one, here for specks http://www.discountramps.com/carriers.htm

[RØKSTA]

I have one for sale! Check my thread in online trading for it.