gotta check this out..

[bugjuice]

This bike is a custom 'hybrid' of bikes.

Bling from everyone for guessing what the original bike is/was
and more bling for guessing the more tricky parts to it.

I'll post up a list of what the actual mods are when everyone gets pissed off with me.

For those who have seen this bike, which I doubt many have, then keep shush until everyone else is pissed off with getting it wrong..

Out of interest, has anyone seen this bike before?

edit -
<blockquote>This bike is:
a 99 zx6
zx10r forks and wheels
filled and smoothed zx10r swingarm
05 636 upper and lower
05 ducati 999 tail
custom r1 projector headlight
double buble screen
zx7 vortex rear sets with custom brackets
ohlins damper
modified tank
r6 tail intergrated tail light
ghilles clip ons
braided lines
did 520 chain 3 up 1 down
shortened ti muzzy and ti header

next season it will get a zx9r motor with a 160hp muzzy kit</blockquote>

[Finn]

Originally it was a CBR1000. The rest is up to the imagination...

What's my prize?

[MidnightMike]

Im going CBR250rr

[bugjuice]

nope and nope
either of you even trying?

[MidnightMike]

A gixxer thou?, nah no-one would do that to it.:no:

[Slingshot]

The frame kinda looks like an R1 and the front fairing look ZX10ish.

[MidnightMike]

Dam, I tried to google it and got this ....

[Sketchy_Racer]

the front brakes look like they are off a ZX10R

as does the front fairing,

the frame looks very similar to a R1 i think?

and the wheels look like a ducatis??

im probably wayyyy off but hey i gotta try

[Sketchy_Racer]

oh oh


the Exaust system is a muzzy!!!

now give me bling.... no not red bling either

[deathstar]

looks like someone took the gn and looked at it with sqinted eyes

[MidnightMike]

Its the same bike as gremlins, i forgot what its called :Oops:

[Finn]

Okay, how about an MV Agusta... originally?

[The_Dover]

ZX10 frame? Looks like a Kwaka headstock from the ignition barrel position and the frame welds are in the right place for a kwaka, I think.

[zadok]

Whatever it is , it looks nice all dressed up.

[MidnightMike]

A VFR800 or 750, or 700?

[bugjuice]

so far, the only bit right is the ZX10 brakes (and wheels, and forks just to boot, and possibly the triple tree, but not sure on that. It's not mentioned).
Also has a Muzzy system, yes..

[sedge]

Looks like around a 2000 ZX6R frame ?

Sedge.

[bugjuice]

oooooooo so close, but no. it ain't.

[MidnightMike]

so far, the only bit right is the ZX10 brakes (and wheels, and forks just to boot).
Also has a Muzzy system, yes..

No-one should get bling for guessing the muzzy system, it says muzzy on it! :bleh:

[bugjuice]

no one did..

[MidnightMike]

The 04 636 frame :2thumbsup

[sAsLEX]

ducati tail?

[zadok]

Looks like a Honda motor to me, but not sure which.

[bugjuice]

nope.
and don't google it.. you'll spoil the fun.

[Sketchy_Racer]

oh oh is the fairing off a ZX12R with the right hand light deleted?

[bugjuice]

has a Duc tail.. well done..
everything else wrong so far..

[sedge]

Blade engine ? Ah.. I got no idea, definitely a Kwak frame... Wouldn't have said it was off anything bigger than a 600 ?

Sedge.

[sAsLEX]

Blade engine ? Ah.. I got no idea, definitely a Kwak frame... Wouldn't have said it was off anything bigger than a 600 ?

Sedge.

zx6rr then??

[bugjuice]

tis a kwaka frame. tis a 6 hundy

[bugjuice]

zx6rr then??
wanna pick a year?

[crashe]

Its a Heinz 57 :rofl:

Just keep it away from Loosebruce and White trash.. oh and Death as well...
Cos they will want to do wheelie's on it and thrash it...:msn-wink:

Nice Heinz 57....:msn-wink:

[sAsLEX]

wanna pick a year?

ummm not really


will go with 04 but I have done all the hard work, now someone will just guess the year !

[bugjuice]

it's a long way away from here, so I think it's safe for now

[bugjuice]

ummm not really


will go with 04 but I have done all the hard work, now someone will just guess the year !
you have done some good guess work..
but nope, not 04

There's some more really trick things on there, just have to look hard

[R6_kid]

looking at the engine cover (its too long to say anything but kawasaki) i'd guess its a ZX-6RR frame, with a ZX-10's brakes etc, and therfore probably a ZX-10 or 12 engine?

or maybe the guy is wanker and had a custom cover made too :blink:

[Postie]

96' Kawa 6R frame.....
still looking for the tricks....
toe sliders on the side fairings....??
the headlights look like they are from a BMW or Audi

[bugjuice]

looking at the engine cover (its too long to say anything but kawasaki) i'd guess its a ZX-6RR frame, with a ZX-10's brakes etc, and therfore probably a ZX-10 or 12 engine?

or maybe the guy is wanker and had a custom cover made too :blink:
the covers have just been painted/sprayed. The ZX10 covers have holes around the edge, well, not holes but round indents. still a 600

RG100 got the brakes..

Good guess on the head light and year Postie, but it ain't from a car and it ain't that old ;)

[Postie]

Good guess on the head light and year Postie, but it ain't from a car and it ain't that old ;)
BMW GS or similar BMW bike. R1150?
99 frame?

[bugjuice]

BMW GS or similar BMW bike. R1150?
99 frame?
tis a 99, good guess..
not there on the light yet tho..

[R6_kid]

light looks as though it could have been stolen from a ducati or R6/R1, its a projector beam light, and they all prety much look the same, i'd say its mounted in a custom plastic setting though.

[Marmoot]

Looks like a very nice ZX7 frame, engine and ZX7RR rads (otherwise there will not be ram air holes on the side, and the side beam from GSXR750 will not be heavily tappered towards the swingarm pivot), with Modern ducati (749/999) subframe and rear body.

The fairing is one of those bloody kawasakis......6,10 they are all the same. The modified old R1 lights is too big somehow.

Nice forks.....look like 636. You must've been real proud eh Kit?

Rear Huggers and front are taken from R1. Looks like an old one too.

I don't really like that gay Italian wheels though.......Aprilia, I believe?

I think it's bloody ugly. I like my Sp1 better..........

[bugjuice]

some good guesses there.. getting close on a few.

R1 headlight.
It's not a ZX7 tho
999 tail
ZX10 forks

[Marmoot]

some good guesses there.. getting close on a few.

R1 headlight.
It's not a ZX7 tho - YOU ARE LYING BASTARD! *sob* *sob* *hic*
999 tail
ZX10 forks - Err....dunno, they all look the same to me....6, 10 all the same

10 characters...

[bugjuice]

ok, I'm a lying bastard.. still isn't a ZX7 tho

[loosebruce]

Ohlins steering dampner
Dunplop 218's
Rear shock looks like a stocker.
Swingarm, seen it before but it has escaped me at the mo.

[nudemetalz]

I'd say a ZX-12 engine in there.

[mini_me]

99 zx-6r frame (w00t i can read)
married to a 05 6r swingarm and rear shock
zx10r front end (again)
the motor is also early 99 zx6r same year as frame
how was that?

[bugjuice]

nudemetalz - read dude!!

mini me -
1) yes, well done (already established)
2) close, but nope
3) close, but nope
4) yep, 99 ZX6 motor still

I'll post the short list up 24hrs after I first posted it..

[nudemetalz]

ah oops,...can I borrow ya glasses ? :doobey:

[bugjuice]

lol.. sure.. ;)

[bugjuice]

any last guesses?
I'll post up the list at 10:27

[Marmoot]

any last guesses?
I'll post up the list at 10:27

Seems like a Hyosung with a Yamuda fairing :hitcher:

[bugjuice]

ooooooo so close, and yet you still haven't a fuckin clue :p

[bugjuice]

k, the list is:

<blockquote>its a 99 zx6
zx10r forks and wheels
filled and smoothed zx10r swingarm
05 636 upper and lower
05 ducati 999 tail
custom r1 projector headlight
double buble screen
zx7 vortex rear sets with custom brackets
ohlins damper
modified tank
r6 tail intergrated tail light
ghilles clip ons
braided lines
did 520 chain 3 up 1 down
shortened ti muzzy and ti header


next season it will get a zx9r motor with a 160hp muzzy kit</blockquote>

[Postie]

it probably handles like shit, all those different bits from different bikes, bikes that had bits designed to work together on each individual bike. I might be wrong, but i doubt it

[bugjuice]

I don't think he built it to break track records..
Can't see why it wouldn't handle pretty well, as long as it's set up nicely, but it isn't going to be ground breaking stuff. It'll work - ish