FS: CBR250 parts (MC19)

[FlyingDutchMan]

I have bunch of spare parts for the CBR250R (J) or (K) AKA the MC19. sprockets, brakes, electronics, carbs etc. Ask me for what you're after and I'll let you know if I have it, and what state it is in. Sorry but I don't have any plastics (fairings/screen) at all (otherwise they'd be on my bike).

[Nolan]

hello
You wouldn't happen to have the seat in good condition?
Mine has a small tear in it (small but its pissing me off)

[Satch]

hey man, just thought id let you know ive got a seat $35 in good condition, ive got just about a whole bike of spares for sale aswell

[kev4eva]

Hey men, got any heel guards??


I have bunch of spare parts for the CBR250R (J) or (K) AKA the MC19. sprockets, brakes, electronics, carbs etc. Ask me for what you're after and I'll let you know if I have it, and what state it is in. Sorry but I don't have any plastics (fairings/screen) at all (otherwise they'd be on my bike).

[FlyingDutchMan]

hey man, just thought id let you know ive got a seat $35 in good condition, ive got just about a whole bike of spares for sale aswell

HIJACKING! Its alright though - I don't have any seats avail. Check trademe.

[FlyingDutchMan]

Hey men, got any heel guards??

I'll check when I get home, but I suspect they won't fit your bike - MC19 ones won't fit on an MC22 (CBR250RR).

[jahmin]

Would you happen to have a left hand control block (ie the piece with the indicators and headlight switches etc on it), and do you know if it would work on an MC22?

If so that would mucho awesome.

Cheers.

[FlyingDutchMan]

Would you happen to have a left hand control block (ie the piece with the indicators and headlight switches etc on it), and do you know if it would work on an MC22?

If so that would mucho awesome.

Cheers.

I'm pretty sure I've got one - I'll check tonight. AFAIK they're the same for a whole range of hondas.

[FlyingDutchMan]

Still plenty of parts left...

[2QK2C]

Do you have the headlight?

[FlyingDutchMan]

Yep, I have a couple of head lights sitting around - both in very good condition with working 60/35 W H4R bulbs included. I'm not sure if the 250 has the same head light as the 600, but for $30 for one or $50 for two (+pp ~$5) it's yours.

[2QK2C]

Hey, yeah they probably arn't the same, but i need one temporarily while my front fairing is getting renewed. (doesn't matter aslong as it plugs in and works, will make a contraption to secure it to my front subframe while front fairing is off)

Only place I can find a light for my cibber is brand new from cyclespot :( $450)

Contact me on t.bronnum@hotmail.com
cheers

[jimmy281085@hotmail.]

hey do u stil hve bike dismntling? need a right mirror and break leavor could u fling me a txt i dnt know how this site works 0273470044
cheers

[r3in3r]

So funny. I've just found this thread. I need the rear axe with snail cam. Do you still have them?
Cheers

[FlyingDutchMan]

hey do u stil hve bike dismntling? need a right mirror and break leavor could u fling me a txt i dnt know how this site works 0273470044
cheers

Yep, still have a box full of parts... However don't have mirrors. Will have to checkup about the brake lever at home. Are you after the front or rear brake lever?

You can pick up decent after market mirrors which fit straight onto the bike from most bike shops for around $80.

[FlyingDutchMan]

So funny. I've just found this thread. I need the rear axe with snail cam. Do you still have them?
Cheers

I might have a rear axel (I'll check at home), but I've never heard of or seen a snail cam for the CBR250.

[ducatilover]

so you have a set of clip on bars?

[FlyingDutchMan]

so you have a set of clip on bars?

I have some... 2 left and one right. Both of the left ones are bent (one noticeably, and the other barely), with no bar ends. The right one looks okay, but the bar end is buggered as far as I can tell.

[FlyingDutchMan]

So funny. I've just found this thread. I need the rear axe with snail cam. Do you still have them?
Cheers

No rear axle sorry, but I do have the parts pictured below if that is of any use.

[FlyingDutchMan]

And some more parts...

In addition to the photos, I have a complete exhuast system - some of the headers are slightly out of shape, a set of carbs, and the under sub frame plastics.

One of the frames is registered, but on hold (the frame is a bit bent though), while the other frame is not and has never been registered in NZ (i.e. the likelyhood of getting road legal in NZ is about 0.00).

[Manuka]

Hey. do you have a choke cable? Cheers

[The Pastor]

how much for the rear subframe?

[The Pastor]

And some more parts...

In addition to the photos, I have a complete exhuast system - some of the headers are slightly out of shape, a set of carbs, and the under sub frame plastics.

One of the frames is registered, but on hold (the frame is a bit bent though), while the other frame is not and has never been registered in NZ (i.e. the likelyhood of getting road legal in NZ is about 0.00).
got that rear subframe?

[FlyingDutchMan]

got that rear subframe?

Sorry, for some reason KB didn't PM of your post. Anyway, I do have the subframe, however it is slightly twisted (i.e. when mounted on bike, and the bike is vertical, the seat is tilted a little to one side. You might be able to straighten it up yourself, I've bween too scared of making it event more bent than it is. Yours for $5 + shipping.

[FlyingDutchMan]

Hey. do you have a choke cable? Cheers

Yep. Heres a pic of it - somewhat damaged. Other end is fine. Yours for $2 + shipping.

[ducatilover]

I have some... 2 left and one right. Both of the left ones are bent (one noticeably, and the other barely), with no bar ends. The right one looks okay, but the bar end is buggered as far as I can tell.

if you come across a set of straight bars give me a yell. how much for the right hand bar

[FlyingDutchMan]

if you come across a set of straight bars give me a yell. how much for the right hand bar

Yours for $4 + postage (i think postage will be around $6).

[ducatilover]

Yours for $4 + postage (i think postage will be around $6).

cool, if i dont find a straight set ill grab that off you mate

[shingo]

And some more parts...

In addition to the photos, I have a complete exhuast system - some of the headers are slightly out of shape, a set of carbs, and the under sub frame plastics.

One of the frames is registered, but on hold (the frame is a bit bent though), while the other frame is not and has never been registered in NZ (i.e. the likelyhood of getting road legal in NZ is about 0.00).

How much you want for that lower triple clamp?

[Alunks]

hi mate, do you have a speedo cabe by any chance?...

[FlyingDutchMan]

hi mate, do you have a speedo cabe by any chance?...

Sorry, the one I do have the inner seems somewhat stuck to the outer and won't turn.

[expidition]

Hi there are you still parting out bits?
Looking for a new choke cable

thanks