wanted Honda rolling frame to suit mini chopper motor

[craisin]

Wanted a larger framed Honda to suit lay forward 50cc engine. To make a big boys moped thx. I have a rollong frame of a CX shaft drive twin disk front end to swap thx:yeah:

[skidMark]

got to make sure you don't make her to heavy or itll go very slowly with the 50 in it

ill have a think as to what you could put it in......do you have gear to change the mounts...or do they have to be the same?

[craisin]

yeah right a 110 frame would be fine. Would be nice to get a manual clutch conversion??? any clues . on how to. Was thinkin of chopping my RM250 fram alloy swing arm and the tires off the CX are the same size as the RM to get road tires.

[craisin]

Do have welding gear to make mods. And a mates got a Yam 125 that a prime victim for the chop:hitcher:

[craisin]

Got a van to pick up and drop off whateva

[The_Dover]

You could use a CBR1000RR Repsol Replica frame but I'm not too sure it could handle all the power you want to put in it.

[skidMark]

call the guys at 50/50 racing....ask to talk to either richard or kevin.....i know on the thumpstars motors that they can be converted back to manual clutch from an auto clutch but don't know about if it is already auto from factory....

give them a call...

0508 4 MOTOX

[craisin]

:Oi: if you want to throw one of ur fancy frames at me Dover Ive got a 250cc 2stroke single that will tame the beast:rolleyes: only if ur sick of the site of it:baby:

[The_Dover]

Try the verge on Peak Rd just before Kaukapakapa. I'm sure I left one lying around up there.

It might be a little bent tho.

[craisin]

on the side of the road Dover , it may be easier to find your marbles that you lost there:weird:

[craisin]

:eek: thx Mark for 50/50s number but they seem to be engaged all the time:violin: I guess they are Auck

[craisin]

a CG110 Honda frame would be ideal :yes:

[craisin]

Mark that ph# aint Turboed to as the seals are shot:bash: been engaged all day ;)

[craisin]

Markauckland that ph# is still busy :whistle: :bs:

[skidMark]

errrrrr

0508 4 urban???

or try (09) 570 6101 thats apl the head office for 50/50 .....select kavin or richard kevins prob your best bet as that the main desk...ask for richards cell number if he isn't there...i can't find it right now

[craisin]

errr well I was offered the option to leave a message twice. But I dont leave PH#s nowdays :violin: I might go and see the Mini Chopper shop down the road, they should have recovered from the Ram-Raid that had them shut for ages:oi-grr:

[craisin]

this dont seem to attract the private bike hoarder:sherlock:

[craisin]

was thinking to ring an aquaintance to swap a 400 yam for printers. Could swap printers for CG110 dont mind broke motor otherwise complete:mega: :spudflip:

[craisin]

:violin: too many Forum Whores gets you on page 2:spudguita

[craisin]

well i guess its over for this thread as ive decided to use a RM 250 Suzuki frame Mono-shock Alloy rims. :soon: