Poo's wants a....... [Archive]

cowpoos

22nd April 2006, 10:35

I wanna rgv or nsr or kr1s or tzr rolling chassis.....maybe a rs 125 chassis

I'm going to build a stunt bike using a large four stroke single and a lite weight chassis....with the possibility of even doing a few F3 races with the contraption...any help appreciated

cowpoos

22nd April 2006, 14:44

does anyone know where a rmz kxf 450/ wr426,440....or similar engine is for sale....

Kickaha

22nd April 2006, 19:32

I wanna rgv or nsr or kr1s or tzr rolling chassis.....maybe a rs 125 chassis

The RS chassis won't be a very good option,very short and not much room on them or much room to put one of the motors you've mentioned, you'd be better off with one of the other's you've listed

Kornholio

22nd April 2006, 19:37

I got an old CT125 in the shed....the frame is fucked but the motor is strong hehehe

God help the F3 class :8

Badcat

22nd April 2006, 20:16

hey poos.
i have an RGV chassis - all set up for an XT/TT/SR500 motor.
it's beautifully done -
totally new alloy engine cradle
gear linkage to reach RGV footpeg
nicely fabbed oil tank fitted into rear subframe
the chassis is on trademe -

http://www.trademe.co.nz/Browse/Listing.aspx?id=54287063

i also have a pipe, a front end, a shock and swingarm.

PM me for pics if you are interested.

ken

stanko

22nd April 2006, 20:50

Don at Pit Lane in Chch has a rolling frame from a KR1 he wrecked this week.

cowpoos

22nd April 2006, 20:58

Don at Pit Lane in Chch has a rolling frame from a KR1 he wrecked this week.
got a ph number for me bro....I hav a chch phone book....just hav no idea where it is....

WINJA

23rd April 2006, 10:48

i looked at a half finished one years ago , cr500 in an nsr250rk frame , from memory the cr 500 had the same hp as the nsr but twice the torque , or some crazy shit like that

cowpoos

23rd April 2006, 12:43

i looked at a half finished one years ago , cr500 in an nsr250rk frame , from memory the cr 500 had the same hp as the nsr but twice the torque , or some crazy shit like that
I don't fink I can race a 500 two stroke water cooled motor in F3....
I'll be happen with a high reving single from a modern four stroke MXer...50-55 hp would be fine... the engines weigh fuck all and the total weight of the bike will be fuck all aswell...

stanko

23rd April 2006, 12:54

got a ph number for me bro....I hav a chch phone book....just hav no idea where it is....

65 Manchester St Christchurch 0-3-379 7382

Kornholio

24th April 2006, 00:27

I don't fink I can race a 500 two stroke water cooled motor in F3....
I'll be happen with a high reving single from a modern four stroke MXer...50-55 hp would be fine... the engines weigh fuck all and the total weight of the bike will be fuck all aswell...

Pity you're such a fat bastard then... might as well be riding the CT125 :killingme

Kickaha

24th April 2006, 08:14

I don't fink I can race a 500 two stroke water cooled motor in F3....

Fink again then, the class rules allow 2 stroke singles up to 500cc

slowpoke

24th April 2006, 08:22

Fink again then, the class rules allow 2 stroke singles up to 500cc
Holy snappin' duck-shit! That's got the grey matter fizzin' an' sparkin', eh Mr Poos!!!
Hmmmm, that'd be sweet thang for F3...but it would be a stunning cunt to do a cunning stunt...

cowpoos

24th April 2006, 10:11

Fink again then, the class rules allow 2 stroke singles up to 500cc
I think thats air cooled 500cc singles? do you have a rule book you could check for me please bro?

Kickaha

24th April 2006, 10:24

I think thats air cooled 500cc singles? do you have a rule book you could check for me please bro?

It makes no mention of cooling sytems

http://www.motorcyclingnz.co.nz/download/2003_MOS_Appendicies_ABCDE.PDF

appendix B

k14

24th April 2006, 10:27

I think thats air cooled 500cc singles? do you have a rule book you could check for me please bro?
Guy raced a water cooled CR500 in a CR250 frame in F3 in last years levels and ruapuna winter series.

slowpoke

24th April 2006, 10:40

Guy raced a water cooled CR500 in a CR250 frame in F3 in last years levels and ruapuna winter series.
Water cooled 500 'crosser motor in a nsr/rgv/rs etc frame: $3000
Mr 'Poos sittin' on his arse while said machine explores the shrubbery: priceless!!
Nah, sounds like a fuggin' blast if you're gonna build one. In fact, how's about you build two of 'em and I'll take one off your hands?

cowpoos

24th April 2006, 11:00

cowpoos

24th April 2006, 14:29

would anyone know of any kx500/cr500 [watercooled] engines are forsale... don't hav to be working....but hav to be rebuildable!!

mite be doz in it for the finder...

slowpoke

24th April 2006, 23:13

well I've had 4 offers for chassis.....and know two good engine builders...and a good engineer for welding,etc.... if you want one.... we could sort something out...as I'm only just down the road from ya...
I'll prolly catch you round the (speed?) traps when I get back home and we'll have a chin wag. Best NOT to do it over a few beers, else I'll end up staggering out to the shed at three in the morning with cable ties in hand, eying up the 5.0hp honda (yep, typical CBR donk...) in the lawn mower and the missus pushy!

cowpoos

24th April 2006, 23:25

I'll prolly catch you round the (speed?) traps when I get back home and we'll have a chin wag. Best NOT to do it over a few beers, else I'll end up staggering out to the shed at three in the morning with cable ties in hand, eying up the 5.0hp honda (yep, typical CBR donk...) in the lawn mower and the missus pushy!
lmfao....what only 3am.....lol

R6_kid

24th April 2006, 23:47

put this donk in it

http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-accessories/Engine-drive-train/photos/a-54542157/p-19945121.htm

should give it some big danglies...

cowpoos

25th April 2006, 10:32

put this donk in it

http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-accessories/Engine-drive-train/photos/a-54542157/p-19945121.htm

should give it some big danglies...
nah....to heavy....

Sniper

25th April 2006, 11:56

Got a mate selling a whole CR, but I think he knows where to get a spare engine too.

cowpoos

25th April 2006, 12:54

Got a mate selling a whole CR, but I think he knows where to get a spare engine too.
hook me up......

Sniper

25th April 2006, 12:55

hook me up......

Just sent him a text, He says he will chat to the guy after work. I'll PM you when he lets me know

cowpoos

25th April 2006, 13:40

Just sent him a text, He says he will chat to the guy after work. I'll PM you when he lets me know
thanks man.....

Brian d marge

26th April 2006, 14:58

What class would A XR650 motor in an RS250 frame race in ..there is one here on the auction sitting for Sweet FA ,,,most of the hard work has been done ie engine in frame and running gear , just body work now

its worth a punt if it can be used.

Stephen

cowpoos

26th April 2006, 15:09

F3,clubmans......maybe more.....

crazybigal

26th April 2006, 16:22

rick at corsa motorcycles has an aprilia rs125 for sale no motor.
its on trademe

cowpoos

26th April 2006, 20:26

rick at corsa motorcycles has an aprilia rs125 for sale no motor.
its on trademe
he wants to much for it...

cowpoos

26th April 2006, 20:27

I got all excited when I saw your user name. Crazy Bi Gal. Then I checked your profile and it said male. Dammit. Crazy Big Al.
your married u twat....or did u forget??

Ivan

26th April 2006, 20:44

theres no difference in chassis between the RS50 and the RS125 and I struggled to fit a XL125 in it let alone CR500
Plus it wouldnt handle youd snap the chassis under power

Ha 2 more gus from the raps that I aint even met

Sketchy_Racer

26th April 2006, 21:41

err Ivan are you FUCKING BLIND and stupid

Im pretty sure there is a BIG difference between a RS125 and a RS50.

cowpoos

26th April 2006, 22:41

Helloooooo, Crazy Bi Gal means she would do women too.

Man what does it take.
I'll teach ya sometime lad.......

Ivan

27th April 2006, 18:22

err Ivan are you FUCKING BLIND and stupid

Im pretty sure there is a BIG difference between a RS125 and a RS50.

No mate depends on the year if it is the single sided or not i know cause a guy had a RS125 aprillia and he said ther was no difference bar the swing arm

gav

27th April 2006, 19:25

No mate depends on the year if it is the single sided or not i know cause a guy had a RS125 aprillia and he said ther was no difference bar the swing arm
Oh right, well if he said so, it must be true...:wait:
I thought he was talking about a Honda RS125 frame, not a Aprilia RS125.
Personally I think you'd be better off buying a 450 MX bike, swapping the wheels and front brake and racing it as a Super Motard, can also run in F3, be good stunt bike and could ride it on the road if so desired. Much more practical and probably just as fast. :blip:

sugilite

27th April 2006, 20:05

No motards are allowed in F3 for the actrix series, and the pacific series have the same rule.
I assure you, a mx motor in a road race frame will always be faster than a motard, I've raced a kx500 in a rgv frame and also my kx500 motard bike, and there was a real big difference....

Ivan

27th April 2006, 20:16

Just a question were would you stunt ride in the Wairarapa especially Feahterston

cowpoos

27th April 2006, 20:38

Just a question were would you stunt ride in the Wairarapa especially Feahterston
anywhere I feel like it.... :)

slowpoke

28th April 2006, 01:54

Mr. Peanut

8th May 2006, 12:48

:corn: Pretty obvious, RG500 engine in a an NSR frame, big singles are pretty unrideable in an NSR frame :cool:

Go Mr Freddy Poos ! :corn:

cowpoos

8th May 2006, 14:31

:corn: Pretty obvious, RG500 engine in a an NSR frame, big singles are pretty unrideable in an NSR frame :cool:

Go Mr Freddy Poos ! :corn:
can't race it in f3 with a nsr500 engine...and I think you might be wrong about the big single comment....time will tell :)