Yamaha Parts

[Alive]

I've just purchased 5 boxes of brand new Yamaha parts, still in the bags/boxes with part numbers.

There is a big mix of bits and pieces, old and new (mostly old).

I have pistons, rings, bearings, seals, gaskets, decals, brake shoes, headlight surrounds, couple of stands, levers, light switches, cables, sprokets, indicator lenses, couple of brake lights, springs, spokes, couple of engine side covers, clips, clasps, and assorted other bits and pieces.

I haven't yet had a chance to have a good look through it all but post or message me if your looking for anything you think I might have... bearing in mind I will not have an answer for you immediately :)

[crashe]

Do they all look like sportbike stuff?


By any chance is there any Cruiser Yamaha stuff in the boxes?
Looking for a indicator lens cover for my cruiser.

[Alive]

It's a mix... and there are a few indicator lenses

[froggyfrenchman]

Im after a headlight off a fzr750, pm me if you have one

[Alive]

What year?

[dss3]

Got anything to suit an '04 R1? Could do with some spares for the race bike, umm, levers would be a handy start, maybe rearsets?

Cheers
Daryl

[Alive]

Hey Daryl,

I doubt very much that any of these bits are that new... I would guess that they are all pre 2000...

Cheers :)

[JT.]

Anything at all for a FZR250, 3LN model? Top of priority list is speedo cable

Cheers

[Badcat]

I've just purchased 5 boxes of brand new Yamaha parts, still in the bags/boxes with part numbers.

There is a big mix of bits and pieces, old and new (mostly old).

:)


post the part numbers.

[Alive]

Could take a while... the boxes turned up today and there are 2-3 hundred bits and pieces there... I will however have a sort through it all in the weekned :)

[Alive]

Hey JT ... What year is your FZR?

[Alive]

Hey Froggy... not looking good on the headlight... what year is it?

[Alive]

JT... sorry no cables with 3LN on them

[Karma]

You have anything with part number - R1 ?

I'll give ya $50...

[Alive]

Looks like they mostly start with a number... but i'll be sure to keep an eye out for anything

[R6_kid]

anything identifiable as being from a 99 R6? Model number is 5EB, i think most parts have that as the start of the serial.

[Alive]

anything identifiable as being from a 99 R6? Model number is 5EB, i think most parts have that as the start of the serial.


I don't know... but I will add the part number to my list and get back to you once I have sorted the parts

:)

[Alive]

post the part numbers.

Took some doing but here ya go....

Still got a couple of small boxes of bits with no part numbers.

If you have a 70's - 80's dirt bike then you might find a few bits you can use.

PM me if you want to make a deal on any of it :)

[Alive]

Oh and if possible go by part numbers rather than model as the model numbers came from the net and may not be accurate :)

Also, the descriptions came from my head... so don't rely too much on them either :no:

[RS2000]

I'm keen on all your 4lo parts, how much you after? I am also after a 5/8 bore mastercylinder, speedo cable and brake and clutch levers, I live in Henderson so I could possibly pop round to see if any of your other parts are similar to my cables and levers, thanks

[Alive]

You're more than welcome to come and have a look... I'm in Kelston.

Flick me a txt on 027 285 1701 for the address :)

[Folcan]

Hey im looking for a FZR 250 3ln left foot peg thing, in my last little crash my foot peg is quite abit shorter

[Alive]

Sorry, don't have one

[Kwaka-Kid]

Hey Alive - who did all that stuff come from? Im sure i gave all that stuff away a few months ago.

[Alive]

Hey Alive - who did all that stuff come from? Im sure i gave all that stuff away a few months ago.


Came from Palmerston North :)

[iridelikeitipe]

Have just joined KiwiBiker and so just read your original thread. I am after any parts with prefixes of 137, 372 or 373. These are all Yamaha 125 two stroke single models. Anything like that amongst your parts?

[inlinefour]

I've just purchased 5 boxes of brand new Yamaha parts, still in the bags/boxes with part numbers.

There is a big mix of bits and pieces, old and new (mostly old).

I have pistons, rings, bearings, seals, gaskets, decals, brake shoes, headlight surrounds, couple of stands, levers, light switches, cables, sprokets, indicator lenses, couple of brake lights, springs, spokes, couple of engine side covers, clips, clasps, and assorted other bits and pieces.

I haven't yet had a chance to have a good look through it all but post or message me if your looking for anything you think I might have... bearing in mind I will not have an answer for you immediately :)

Turns out I have a 1983 YZ80K, if you have any parts suitable for this model please PM me this coming weekend as I'll be out of the sin bin again.

[Alive]

Have just joined KiwiBiker and so just read your original thread. I am after any parts with prefixes of 137, 372 or 373. These are all Yamaha 125 two stroke single models. Anything like that amongst your parts?

I have

137-83941-02 Choke Lever
137-14186-00 Float?
137-11351-10 Gasket

That's it im afraid

[Alive]

Turns out I have a 1983 YZ80K, if you have any parts suitable for this model please PM me this coming weekend as I'll be out of the sin bin again.

Got a couple of YZ100 bits but no 80.. Sorry

[inlinefour]

Got a couple of YZ100 bits but no 80.. Sorry

that project has been finished for quite some time now. Got all the parts I needed new from the local Yamaha dealer, good bunch. :yes:

[TLDV8]

Looks like there might be some parts that will fit a 1972 CT2 on the list,i better do some homework :niceone:

<a href="http://photobucket.com/" target="_blank"><img src="http://i30.photobucket.com/albums/c345/manurewa/CT2.jpg" border="0" alt="Photobucket - Video and Image Hosting"></a>

[BornToLean]

Got any foot-pegs, or bar ends?
'87/'88 FZR 750/1000

[Alive]

Got any foot-pegs, or bar ends?
'87/'88 FZR 750/1000

Nope... sorry

[lb99]

any chance of a rear shock for a DT175?

[Alive]

any chance of a rear shock for a DT175?

No, sorry... nothing that big left now... Trademe is my friend :)

[Alive]

any chance of a rear shock for a DT175?

No... Sorry