Log in

View Full Version : KAWA ZXR 250c - parts needed - any


Brett
1st June 2006, 17:18
I just managed to procure a 1992 ZXR with 19000kms, need some parts to make good again tho...
I will add to this, but at present I need:

Front headlight
Front Fairing
RHS Fairing
Front Forks - not needed

EDIT * also want front bracket for mounting the headlight and fairing on.
Crank case
If you have anything, please PM me! Cheers.
placidfemme
2nd June 2006, 10:15
I just managed to procure a 1992 ZXR with 19000kms, need some parts to make good again tho...
I will add to this, but at present I need:

Front headlight
Front Fairing
RHS Fairing
Front Forks

If you have anything, please PM me! Cheers.

There are some front forks on TradeMe, listed by City motorcycle Wreckers (09 3769260) in Grey Lynn, Aucks.

You can buy a new top fairing from Just Fairings in hamilton (www.justfairings.co.nz)

Front headlight - Try some different wrecking companys...

RHS fairing try City Motorcycle Wreckers...

Good luck
Brett
2nd June 2006, 15:39
Hey PF, thanks for that. I will give them a try. Ricki at City MC has the front forks for me, and i will ring the rest to see waht i can come across.
poorbastard
2nd June 2006, 22:34
Just fairings will probably do the side fairings as well if you ask. Was going to do them for me when I needed them for not a bad price either.
texmo
2nd June 2006, 22:36
whats not a bad price poor bastard? I wanna get a full set of ferrings.
poorbastard
2nd June 2006, 22:42
whats not a bad price poor bastard? I wanna get a full set of ferrings.

Trying to find the quote he sent me but think I deleted it. But it wasn't much more if any from getting them from wreckers if I remember right and they were already primed for painting. Go to the guys site and send him an email, he should reply reasonably quickly.
texmo
2nd June 2006, 22:52
email sent thanks.
sefer
2nd June 2006, 23:58
Hmm, yeah wreckers seem to want a huge amount for very avarage condition fairings. If your thinking of paint anyway (and unless your manage to get matching fairings I guess it's a given) go for the justfairings ones :)
Brett
3rd June 2006, 16:27
email sent thanks.

They are $750 for a front and the two sides. You can try the website, but the guy there told me it was 750 not 700.
poorbastard
3rd June 2006, 16:35
He can alo do the rear sides as well if you are after them.
Brett
3rd June 2006, 19:05
Add to my requests, I would like the front mounting bracket for the gauges and front fairing.
Brett
5th June 2006, 21:12
Still wanted!
placidfemme
6th June 2006, 09:53
Add to my requests, I would like the front mounting bracket for the gauges and front fairing.

The subframe will cost you about $120 from a wrecker, I got mine from City MC in Grey Lynn, I don't know if they have any more, but if you get really desperate I still have mine, which you can have for free, just may need to find someone to do some welding and get it back together (which may be more work than its worth)
Brett
6th June 2006, 17:28
The subframe will cost you about $120 from a wrecker, I got mine from City MC in Grey Lynn, I don't know if they have any more, but if you get really desperate I still have mine, which you can have for free, just may need to find someone to do some welding and get it back together (which may be more work than its worth)

Cheers for the offer, but is still have the one that was on the bike when i got it...its just a tad bent...i suppose i might have to just take time and straighten it up!
I guess it was you who beat me to City motorcylces on the one they are wrecking...Andrew said that all the parts went bloody fast.

You nearly finished your re-build PF?
placidfemme
7th June 2006, 09:55
Cheers for the offer, but is still have the one that was on the bike when i got it...its just a tad bent...i suppose i might have to just take time and straighten it up!
I guess it was you who beat me to City motorcylces on the one they are wrecking...Andrew said that all the parts went bloody fast.

You nearly finished your re-build PF?

If your subframe is just bent, take the bike into City MC, they straightened the subframe I brought from them. If they do that for, your looking at about $150 or less. As they have to put all the fairings on, check the sub frame, remove the fairings, straighten it, and repeat until perfect...

As for my ZXR... I'm months away from finishing it... If you read my thread in fixing and tuning you'll see why. I'm not just getting it road legal... I'm making it all ghey and pretty :) Looking at adding a lot of aftermarket parts, a rear seat cowl, paint job e.t.c

Right now I'm about 3 weeks away from having the bike road legal, but ages away from having it how I see it in my head :)