PDA

View Full Version : Changing weights on Street Magic, anyone?



Street Gerbil
11th July 2006, 09:43
Could somebody please talk me through taking apart the CVT, replacing the weights, and most importantly, putting it all back together on Street Magic?
Winja, the world is counting on you!
Thanks!

texmo
11th July 2006, 17:14
Take the transmition bolts off and have a look all will become clear.

WINJA
11th July 2006, 18:22
Could somebody please talk me through taking apart the CVT, replacing the weights, and most importantly, putting it all back together on Street Magic?
Winja, the world is counting on you!
Thanks!
IT IS REAL EASY TAKE OFF ALL THE SIDE COVER BOLTS PULL OF SIDE COVER, UNDO THE BIG VARIATOR NUT I WEDGE A SCREWDRIVER ON A TOOTH AND SIDE COVER TO STOP IT SPINNING , PULL THE VARIATOR OUT UNDO THE SCREWS PUT IN THE NEW ROLLERS PUT THE SMALLEST SMEAR OF GREASE ON THE SHAFT ASSEMBLE PUT THE BIG NUT BACK ON WITH LOCTITE, IF YOU CAN REPLACE THE SIDE COVER SCREWS WITH CAP SCREWS AND ANTI SEIZE OR JUST USE THE ORIGINAL SCREWS WITH ANTISEIZE , DONT WORRY IF THE GASKET IS DAMAGED.
IF YOU CANT GET THE RIGHT WEIGHT ROLLERS IVE FOUND YOU CAN HAVE 2 DIFFERNT WEIGHTS SO USE HALF YELLOWS AND HALF WHITES EVENLY SPACED FOR INSTANCE, IVE ALSO USED JUST 3 HEAVY ROLLERS INSTEAD OF 6 LIGHT ONES

Grantasaurus
14th July 2006, 14:15
I love how easy Magics are to play with and fix :)