ZXR250c PARTS FOR SALE - WHOLE BIKE

[Brett]

Basically, as the header states, i have virtually a whole ZXR250c broken down to parts for sale.(to help fund my Kwaka 636 fund!)

So far, I have someone interested in the rear Fairings and front sub-frame, the rest is fair game to those who want parts.

Either message here or PM me to see if the parts you need have been sold yet.

I can also be txt'd on 021 412 813.

Let me know what you need!

UPDATED: WITH THE FOLLOWING LIST OF PARTS. SOME PRICES I KNOW ARE LESS THAN THE VALUE, SOME ARE ON PAR WITH VALUE, AND SOME I JUST CAME UP WITH S PRICE. LET ME KNOW!

-One set of white rims in good condition- front tyre = GPR80f with 90% tread. rear tyre = GPR50 with 70% tread. $300
-One rear swing arm, one side is scratched
$120
-One ZXR250c engine done 59,000kms. Complete. Carbies are immaculate, slight oil leak from magneto cover - suspect it has had a small knock that has cracked it sumwhere...only a few drops of oil every couple of days.
$300
-One rear mud guard
$50
-One rear brake disk
$80
-One set of front shocks. In good condition, but need the seals re-done.
$220
-One head set and ignition with keys
$60
-Front Brakes - complete from lever down to pads
$80
-Rear brakes - complete from pedal down to pads
$60
-RHS Clip On
$60
-Throttle Electrics (actual grip is missing)
$5
-Front Wheel Fairing - reasonable condition, a few scratches but overall good.
$70
-Top Fairing including the windscreen which is cracked
$80
-Both side fairings are complete but scuffed.
$120 each
-Headlight (gd condition)
$120
-Exhaust can, scratched and bracket is broken(easy fix)
$25
-Brakelight
$40
-Radiator overflow reservoire
$25
-Rear Sub Frame
$100
-Electrical Loom
$40
-RHS Rear Footpegs
$30
-LHS Rear Footpegs
$30
-Seats (both gd condition)
$80
-Front Tripple clamps (suspect slightly bent, if they are it is only a bit and MAY be able to be straightened
$10
-Main frame, black and in mint condition. VIN no. and chassis number have been written off by an insurance company. The bike was cosmetically damaged, the frame is mint. You could probably get it certified from a bike store pretty cheap, and use it as a base to re-build a bike or something like that.
$50
-Front Rotors, good condition, 4.0mm thick and perfectly straight.
$offers (new are $600 each)
Cracked Magneto cover - could be repaired??
$free to a good home :)
-Horn
$5
-Front Subframe, bent. could maybe straighten.
$free
-Set of sprockets and a chain, these seem to be pretty sweet still.
$70
-Set of bike guages, complete and good condition. speedo shows 59,000kms but can be reset to replace a damaged unit. NO DODGY BASTARDS NEED APPLY :)

That is me little list, if anyone wants anything just flick me a PM. Chur Chur.

Brett

[Coyote]

I'm asking more out of curiosity as I don't have much cash, but how much would you sell almost the entire bike except fairings?

[Brett]

Well, firstly the bike is now entirely in parts strewn across the length and breadth of my garage so I hope that you are good at putting htings back together:gob: . I just finished rebuilding one bike fron the tyres up, and it is not an easy task (bear in mind that I did not have any stands or lifters to hold the frame or engine in place), but yeah, it took a while!
Gave the whole bitch a good clean down tho, and it looks mint.

Secondly, i used the frame from the bike in parts to re-build the other bike, and the frame from this bike has been dereg'd so would have to be re-registered...a lengthly process, although being bare it would be a piece of piss for an engineer to ascertain that the frame is still mint.

Thirdly, and to answer your question...i don;t know! How much is it all is worth..a grand or so????who knows...

[Jonny Rotten]

Basically, as the header states, i have virtually a whole ZXR250c broken down to parts for sale.(to help fund my Kwaka 636 fund!)

So far, I have someone interested in the rear Fairings and front sub-frame, the rest is fair game to those who want parts.

Either message here or PM me to see if the parts you need have been sold yet.

I can also be txt'd on 021 412 813.

Let me know what you need!

contact skidmark on here he would take most of it off your hands id say

[Boosted]

I'd be keen on the side fairings if they could fit on my 250a model? Also the front forks? would they fit a A model?

[placidfemme]

*thinks about what bits I want*

What are you looking at selling the rear seat for?

[Brett]

I'd be keen on the side fairings if they could fit on my 250a model? Also the front forks? would they fit a A model?

Hmm, I dont know if they will fit an a model...your welcome to try...Front forks *should* fit an a model, but dont take my word for it, i have never owned one or worked on one.

[Brett]

*thinks about what bits I want*

What are you looking at selling the rear seat for?

Well there is a set of front and rear seat on trademe for $110, so i dunno, $40 for the rear seat fair??

[Boosted]

Price for the front forks and in good cond?

[Brett]

Forks will need the seals done, will find out how much they are worth and PM you dude.

[Brett]

Tripple clamps - SOLD
Tank - SOLD
Rear Fairings - SOLD
Front Sub-frame - SOLD
LH Clipon - SOLD
LH Rear Set - SOLD

These items have been put aside for buyers, rest of the bike is still available!

[Boosted]

Yeh im still waitin on PM for forks if they fit a A model

[Sniper]

Yeh im still waitin on PM for forks if they fit a A model


Hmm, I dont know if they will fit an a model...your welcome to try...Front forks *should* fit an a model, but dont take my word for it, i have never owned one or worked on one.

Answer your question?????? :shake:

[Brett]

Yeh im still waitin on PM for forks if they fit a A model

PM sent doood.

[Brett]

Updated: See List Of Parts On Original Post

[Coyote]

If you give me a month and a bit I might have the money for that engine. I'll try to get more hours at work

[ajturbo]

-Front Brakes - complete from lever down to pads
$80
-


do you think that they would work on my bucket?.. i have only one disc:scooter:

[Brett]

do you think that they would work on my bucket?.. i have only one disc:scooter:

I really like that idea!! I think that they could be made to work, however you would need to sort out some rotors that would fit onto your buckets wheels. also the zxr250c is a twin disk brake, so you would need to modfiy the rim enough to hold two rotors, and the calipers would need to have some brackets made up to hold onto the fork/frame.

[ajturbo]

I really like that idea!! I think that they could be made to work, however you would need to sort out some rotors that would fit onto your buckets wheels. also the zxr250c is a twin disk brake, so you would need to modfiy the rim enough to hold two rotors, and the calipers would need to have some brackets made up to hold onto the fork/frame.

what i was thinking was,

to remove the callipers and "attach" it to my set up, ??
but the thought of twin discs on a bucket...:gob: :Punk:

[Brett]

I still ahve to post the photo's, sorry, will try and get done tonight when iget home!

[Brett]

I still have heaps of parts available...rotors have two people interested in them, but nothing for certain yet.

[Coyote]

I still have heaps of parts available...rotors have two people interested in them, but nothing for certain yet.
Is your list up to date?

[texmo]

oi brett can I buy the seats?

[Brett]

Yeah man, if you want them, i will sell them.

NOTE: Parts will be up on tardmyself in the next week or so...

[Brett]

Oh, also engine has lost compression in one cylinder, and the rest are getting tired, only really good for parts or a rebuild, carbs are still immaculate however.

Also, recently found out that the brake rotors are A model specific, from the look of them the offset is a bit different to the C models. So they could either be used on an A model, or if someone is desperate, buy the wheels and rotors and they will fit.

[zeRax]

damn, hold off a bit please :D

wrote my bike off and im still waiting for fucking insurance to pull finger, ive told them i want to have first chance at tender, but im not there to have a look at the bike and decide what needs fixing, argh ! :P

[Brett]

damn, hold off a bit please :D

wrote my bike off and im still waiting for fucking insurance to pull finger, ive told them i want to have first chance at tender, but im not there to have a look at the bike and decide what needs fixing, argh ! :P

What do you reckon you stuffed when you binned? Might be able to guestimate what you need, and thus get hold of most of the parts...if you manage to get it back that is!

[masterofpuppets]

Yeh im still waitin on PM for forks if they fit a A model

man that depends if its an a1 or an a2. the a2 uses most of the same components as the c model. a good way to check is to have a look at the rear swingarm, or the gear lever. if you have the boxy square swingarm, and a straight gear lever then its an a1. the a2 has a swingarm which gets thinner towards the back and the gear lever is bent downwards. of course thats assuming that they are original. you can also caheck by the chassis number as well but ive forgotten what they were.

you're welcome :scooter:

[zeRax]

front /top fairing, screen, left hand side fairing mounts and fairings including tail, screen /instrument frame, light switch assembly, headlight panel, dunno what else, engine stuff i have spare anyway, definatley need to use the side cover from it, but raidiator and forks i dont know how they are should have taken a better look

[texmo]

I need the magneto (left hand side) cover.

[Brett]

I need the magneto (left hand side) cover.

You mean my one...as in the cracked one i have or the one on the motor??

[Brett]

Have listed on trademe.

[Coyote]

Have listed on trademe.
Link?

10C

[Brett]

http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-accessories/Frames-bodywork/auction-73154165.htm

Oh yeah, engine has lost compression in 3rd cylinder. Pulled rocker cover off, and the motor has just had the cam chain done. Motor looked pretty good inside bar the missing compression. If i have time, i MAY replace the rings, and that should hopefully sort her out.

[Coyote]

Did you screw in the plug properly? That seemed to fix my RG's compression problems

[Brett]

Yeah, we ran it a few times, but now you have made me doubt myself, will do it again later.

[cykotic1]

What lenght are the forks from top to bottom, also what is the weight?

Are they complete including triple clamps etc?

Thanks

[Mole_C]

You wouldn't happen to have an indicator there would ya? Broke my left front one today :weep: