View Full Version : Pit stands
FROSTY
18th June 2004, 15:01
Hi folks--Im now officially Mr CHAMPION STANDS In a nutshell these guys have been building bike stands in the UK for over 10 years. The desighn is well tested on race bikes from 125 gp racers to 750 supersport bikes.
theyre blooody good quality and suit all bike types.
Most modern sports bikes only have sidestands -makes chain lube or changing tyres pretty hard. Heres the solution. Also a lot more secure way to store your bike around kids or cage drivers.
I have universal rear stands to fit all size bikes from 50cc- 1500cc -They lift a FJ1200
Just a bit of babble about them. They are adjustable for height to suit different bikes.They have 2 types of lifting devices one being padded cups to sit under your swingarm the other being forks to go under your swingarm bobins. You can fold the stand flat when not in use. When the handle is slid tthrough its slot it stops the stand from rotating forward and the bike falling off. With the handle in place its got the longest lever action of any stand available.
Im doing front fork stands that fit under your forks --these are for tyre warmers and changing front wheels
steering head stands -for that fork work
Single sided swing arm stands for honda vfr/rvf or ducatis
Rear folding stand is $100.00
Front head stand $160.00
rear stand folding with a steering head center adaptor unit $150.00
Cajun
18th June 2004, 15:08
that reminds me i was gonna get hold of that friend of yours, so i can get front stand that goes up steering head, i already got the rear one
How much? Esp. for front end that lifts by the steering head. ALready got front and rear, but front lifts under forks and is a bit of a pain in the arse. :Pokey:
duckman
18th June 2004, 16:06
I'd bee keen in a group purchase. I'm after a rear stand. - Anyone else??
How much??
Devil
18th June 2004, 16:17
yeah im pretty keen on a rear stand too.
Cajun
18th June 2004, 16:23
How much? Esp. for front end that lifts by the steering head. ALready got front and rear, but front lifts under forks and is a bit of a pain in the arse. :Pokey:
yeah reason i want that goes under steering head, with range of bikes that we have floating around home, want something that can work on all the bikes not a few
FROSTY
18th June 2004, 16:47
ok there are like 6 different stands. A universal rear costs about $140
It is different from most in that it folds flat when not in use and the handle slides right through to stop the bike rolling off the stand
The front end stand that plugs into the bottom of your forks for tyre changing is I think $100 including sleeves for your bike
There are 2 types of steering head type front stands I think $190.00 but I will confirm There ia also a single sided swingarm rear stand
the universal rear can be fitted with the v type mounts and the alloy thimbles for every type of bikes swingarm mounts are available.
ching_ching
18th June 2004, 16:53
Got pics?
ching_ching
FROSTY
18th June 2004, 16:55
the universal rear is on my bike in my avitar.
Hoon
18th June 2004, 16:56
Yeah that rear stand is one of the better ones I've seen. I'm def keen on one but I got a few other things I gotta sort out first.
Frosty: we scored an almost-never-been-used stand off one of our mates at “mates rates” so we’re now all sorted!
Two Smoker
18th June 2004, 17:11
Im keen for one frosty :niceone: a universal one :niceone:
FROSTY
18th June 2004, 21:45
no worries guys just gimme a yell and I can have em here waiting for ya
FROSTY
26th June 2004, 12:47
ok Ive got 3 rear and one front stand at my place
ching_ching
14th July 2004, 05:58
ok Ive got 3 rear and one front stand at my place
Hi XJ/Frosty,
Still got some of those stands? Looking at a universal rear... would the stand be interchangeable with bobbin fittings for my bike than able to change back to universal for other bikes without bobbin fittings?
Come back
ching_ching
FROSTY
25th July 2004, 12:12
Hi XJ/Frosty,
Still got some of those stands? Looking at a universal rear... would the stand be interchangeable with bobbin fittings for my bike than able to change back to universal for other bikes without bobbin fittings?
Come back
ching_ching
sorry ching ching -missed ya post
The answer is yes-no problems -uiniversal and bobbin
I usually supply em with the universal fitting .The bobbin fitting is a bit extra.
ching_ching
26th July 2004, 21:22
sorry ching ching -missed ya post
The answer is yes-no problems -uiniversal and bobbin
I usually supply em with the universal fitting .The bobbin fitting is a bit extra.
I like the idea of the bar you can push through to help prevent roll off.
Do you have any in your shed or do you have to bring em in?
Are they still $140- for the universal rear? Just biding my time till I have just enough pings saved.
ching_ching
FROSTY
8th February 2005, 22:34
Guys N gals --These stands are still available -anybody interested feel free to contace me
Cajun
9th February 2005, 06:38
price for a front please. does he do one that goes in to the bottom of the triple clamp sorta thing
FROSTY
9th February 2005, 07:30
Ill se if I can organise some pictures for ya
Blakamin
9th February 2005, 09:11
A Pic of a rear would be cool tooo....
Quasievil
9th February 2005, 09:16
Hey XJ, I will need a rear please how much for a new budding young (older) racer wannabe.
Will it be okay for a gixer 400 ?
bugjuice
9th February 2005, 09:59
are the front ones holding the bike up by the bottom of the forks or the type that holds up by the steering head? How much are they for the front?
Also, I have a back stand, but it's a generic 'L' bracket one. Anyone know anyone who could help me weld a 'U' shape on instead so I can pick the back up with pins? The 'L' is good for most bikes, but it gets in the way of the rear bolt. Or swap for one that's already done, but I can't see that happening really.. ;)
Paul in NZ
9th February 2005, 10:36
How much for one to suit a crusty old T140 racer?
Paul N
FROSTY
9th February 2005, 10:39
Guys I have in my gargre 2 types of front stand. the centre of asteering head type and the end of fork leg type. I have rear stands for single sidede swingarm biked--nc30 etc and standard swingarm types.
The normal type rear stands have as an optional extra a swingarm bobbin kit and V type lifters for specific bikes.
The standard rear stand packs away flat when not in use,is adjustable to suit most bikes and the handle acts as a locking device to stop roll off when ya getting rough -maybee like pulling an engine out.
all reall good kit
bugjuice
9th February 2005, 11:05
how much for the folding rear and the steering head type stands?
Might just sell the one I have now and get those two off ya. Might pop round for a look if thats ok..
sAsLEX
9th February 2005, 18:01
NC30 one is how much??
or KK wanna weld me one of your creations up for cheaper??
Quasievil
9th February 2005, 18:07
XJ give me cost mate $$$$$$ what ya want for them ?
Shade
9th February 2005, 18:14
Hey frosty, im definatley keen for a universal rear one.
Ta :)!
FROSTY
9th February 2005, 19:44
come ova and have a look guys--currently the Viffer is on the single sider --Ive got the two types of fron stand and the universal rear.
Two Smoker
9th February 2005, 20:03
Im keen Tony, will come into your work later and have a yarn about them....
FROSTY
10th February 2005, 07:16
ive got all of em at my place -come see em guys -
FROSTY
10th February 2005, 19:56
Here ya go guys --heres the pics of the stands
NinjaBoy
13th February 2005, 18:43
Here ya go guys --heres the pics of the stands
Am I missing something here ? Didya forget to upload the pic ? :confused:
FROSTY
14th February 2005, 18:32
ok guys sorry for the slow response-the pricing is in the first post.
The adapter stand would be good for a couple of guys with bikes
you would get one just rear stand and one complete with front adaptor and then youre covered for front end removals
FROSTY
17th February 2005, 12:49
Hey guys n gals -please call me if ya interested in these stands.
I'm so danged busy at work n stuff Im not really reading here
021544251 Frosty
Drunken Monkey
17th February 2005, 14:31
I can bring mine down to the drags on Friday night if someone wants to see them beforehand. I got them of Frosty last year sometime. I'm happy with the purchase.
FROSTY
26th February 2005, 10:19
ok guys n gals those of ya still wanting these pit stands please call me
021544251 -Im havin puter probs and pms are proving an issue
FROSTY
15th March 2005, 21:12
The pit stand guy is gonna be at the track day
bugjuice
15th March 2005, 21:48
great, who's he coming with?
FROSTY
17th March 2005, 22:18
comin down to watch us
FROSTY
6th January 2006, 10:45
boooin---prices have dropped but still availablke
MrMelon
6th January 2006, 17:01
How much now? Same ones available?
bugjuice
6th January 2006, 17:05
how much for a front stand again? you've got both the fork stand type and head bearing type, haven't ya?
motobob
6th January 2006, 17:21
Hi Frosty
Have you got a front stand that has the pin for the stem. And does it fit all bikes. how mucho.
FROSTY
6th January 2006, 17:31
Yep Ive got the front stand pictured and it fits into the steering head stem
Its got sleeved adaptors to fit a range of headstocks.
price wise the rear stand is now $140
front stand is same price I think
front fork bottom is $120
motobob
6th January 2006, 19:47
Yep Ive got the front stand pictured and it fits into the steering head stem
Its got sleeved adaptors to fit a range of headstocks.
price wise the rear stand is now $140
front stand is same price I think
I'll grab a front stem stand off you. whens a good time during week to come and get it.
FROSTY
25th February 2006, 18:25
Well Ive got a few of these left.
The big point with them is they fold flat when not in use and I know can handle any bike Ive had in my workshop including the grand whale fj1200
Cajun
26th February 2006, 07:44
Frosty how much would it be to courier one of these stands?? for the front steering head stem?
FROSTY
26th February 2006, 08:35
dunno dude--Ill go find out
FROSTY
27th February 2006, 21:10
Cajun--I can bring one to Taupo next race day. Im sure theres someone from down there thall bring it down
Cajun
28th February 2006, 10:20
I be up in akl friday 17th for u2 in the cage, with the misses, so might look at one around that time
i be coming up friday coming home saturday.
I let ya know
they are $140 for the front steering head stem??
FROSTY
2nd March 2006, 22:39
yep and no worries
FROSTY
7th March 2006, 20:55
Rear stands are $135.00--with either forks or
Front Fork stands $135.00
Single side swingarm stands $140.00
Steering head stands $135.00
FROSTY
22nd March 2006, 11:02
here ya go gi=uys
FROSTY
11th May 2006, 17:54
Ok theres been a big change --Im now the owner of the company --Ive got about 100 rear stands in stock with either forks or under swingarm lift
FROSTY
12th May 2006, 08:26
these are available now
Mrs Busa Pete
13th May 2006, 22:54
ill take 2 i see you come for a bbq then get on line under me and bump up your salls
FROSTY
5th September 2006, 19:58
Ok folks --heres the deal
Rear stands are selling on Tard me for $100 I pay a $5.00 successs fee
So Ill do my rear stands for $95.00
FROSTY
9th October 2006, 21:52
boooing refresh
FROSTY
9th July 2007, 18:04
still have some in stock
FROSTY
17th July 2007, 18:07
bumpty bump
boomer
17th July 2007, 18:14
i'll take a front of you if you do me a once in a lifetime half price deal ?
FROSTY
17th July 2007, 18:16
no can't do that
boomer
17th July 2007, 18:50
no can't do that
can't means won't ;) never mind.. worth a try
FROSTY
17th July 2007, 18:55
Won't as in half price is well below what they cost me
boomer
17th July 2007, 20:02
Won't as in half price is well below what they cost me
hook a brother up then and do one at cost?
flame
17th July 2007, 20:10
I need a front stand for this weekend! budget wont allow me to buy one this week..........any one got a spare they can lend just for 2 days??? PLLLLLLLEEEEEEESSSSSSEEEEEEEEEEEEE.... with a pretty in front!
FROSTY
17th July 2007, 20:10
Ok no worries boomer--rear stand %120.00 front 200--flip me the coin
FROSTY
30th August 2007, 19:50
I still have a couple left
montsta56
31st August 2007, 11:15
Hey Frosty would ya have any single sided rears left??
Cheers
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.