L.L. Cool M
5th November 2006, 13:36
Hello, I have a ZXR manual on my PC at work but not at home. My dial-up is too slow to make it worth my while downloading another manual before tomorrow. I tried searching, and I also looked through all nine pages of threads in this section. There, now that I have got that shit out of the way, here is my problem (note, technical terms are going to be completely left out):
I took one end of the rear brake hose off at the end closest to the front of the bike, to pull some parts of my bike out for fixing (I basically just undid and removed the bolt). Those parts have been sorted out and I reattached the brake hose bolt again (the one with the hole that allows the fluid through the hose). However now I have no rear brakes anymore. What's going on?
From what I've read, could this be a problem with air in the fluid? If I am not way off, would I have to bleed the whole lot out and replace the fluid as well?
This has nothing to do with underpants, so don't blame the underpants gnomes. My missing underpants will be discussed in another thread.
I took one end of the rear brake hose off at the end closest to the front of the bike, to pull some parts of my bike out for fixing (I basically just undid and removed the bolt). Those parts have been sorted out and I reattached the brake hose bolt again (the one with the hole that allows the fluid through the hose). However now I have no rear brakes anymore. What's going on?
From what I've read, could this be a problem with air in the fluid? If I am not way off, would I have to bleed the whole lot out and replace the fluid as well?
This has nothing to do with underpants, so don't blame the underpants gnomes. My missing underpants will be discussed in another thread.