Full-size custom choppers under $10,000!!!!

[PITBULLMC]

HEY GUYS CHECK OUT THE HOTTEST NEW BIKES ON THE STREET

:yes: :gob:

http://www.trademe.co.nz/a.asp?id=75586298

[crazefox]

WTF is that how much are you asking for this :scooter: :scooter:

[Steam]

It's trash. Made in Asian sweatshops. Can it even be registered?
He's posted his propaganda in three different forums here on KB.

[Bonez]

HEY GUYS CHECK OUT THE HOTTEST NEW BIKES ON THE STREET

:yes: :gob:

http://www.trademe.co.nz/a.asp?id=75586298
Whats the "Stationary Rear Wheel" in the specs about. No seriously good on ya.
Hope they sale like hot cakes.

[PITBULLMC]

IF ANYONES INTERESTED JUST SEND AN EMAIL THROUGH THE TRADEME LINK,
OR CALL ME ON 021 752 612.

CHEERS

MATT
Pitbull Motorcycles

[PITBULLMC]

Thanks for your comments steam,
its people like you that make me want to achieve more,
you must be an expert on these bikes and know much more then the 150 dealers that carry them in america with a 24 month unlimited mileage warranty. god bless you.

[Steam]

Thanks for your comments steam,
its people like you that make me want to achieve more

Great, I'm glad to help.
What I objected to is not so much the crappy mass-produced no-name chopper, but the fact that you posted exactly the same advertising THREE times in different forums. [now deleted by the moderators]

Can you give some more information as to engine manufacturer, and where it's actually made? American made is a bit hard to believe.

[skidz]

Wellcome to the site Pitbull,

What sort of price are they going for?

[PITBULLMC]

Im sorry if I offended you Steam, but not everyone goes to just this part of the forums, so i thought i would allow everyone to see it, as for providing you with more details, your such an intelligent guy who seems to have already made his mind up, so what more could i possibly tell you?
Have a nice day.

[RantyDave]

its people like you that make me want to achieve more
Achieve more? WTF, are we a pyramid scheme now? Is this part of your great plan to become rich ... Rich ... RICH!!! BEYOND YOUR WILDEST DREAMS!!!

Wake up. It's a shitty Chinese bike. All the best with becoming a TradeMe entrepreneur and all that but I suspect you may need to find a significantly less discerning audience for this particular product. Oh, and do your homework regarding legality and, in particular, liability. Wouldn't want to be in the paper, would you?

Dave

[MSTRS]

Im sorry if I offended you Steam, but not everyone goes to just this part of the forums, so i thought i would allow everyone to see it, as for providing you with more details, your such an intelligent guy who seems to have already made his mind up, so what more could i possibly tell you?
Have a nice day.

That's an attitude that's sure to gain you millions of customers. Not.
Go join all the previous tossers who tried to use the KB forums to flog their crap.

[Bonez]

Im sorry if I offended you Steam, but not everyone goes to just this part of the forums, so i thought i would allow everyone to see it, as for providing you with more details, your such an intelligent guy who seems to have already made his mind up, so what more could i possibly tell you?
Have a nice day.Nice come back. In anyway associated to http://www.pitbullmotorcycles.com/
Btw you'll get use to the oversensitive types.

[PITBULLMC]

Thanks for your comments too dave, I already have dealers in New Zealand,
and I've been importing bikes for the last eight years.
I really appreciate your comments and your honesty,thanks for not judging me or my bikes before doing research or ever meeting me or knowing me.
champion. god bless

[PITBULLMC]

To anyone that does not agree with me showing my bike, or wants to put it down before even seeing it, please feel free to call me on my number listed above i will be sure to help you with any enquiries, its very easy to mock people by internet, but if you want to judge me and my bikes be a man and call me.
cheers
Matt

[gamgee]

does the american come with the bike? you can keep the asian... already enough of those down here

[Waylander]

Lol I recognize that engine, have one like it in Hamilton and a part for it at the foot of my bed.

Not many people on these forums would be interested in a 250cc chopper mate. Especially one with a honda engine.

[crazybigal]

were can we see these in the flesh?
one small design problem, its not a V twin!!

[Mr. Peanut]

Oh dear, these are going to be popular.

[SlashWylde]

Hey Matt, sorry you got a rough welcome. Some of the folks round here are a bit argumentative and closed minded. Hope you do well with your business venture. You wouldn't happen to have a guy called Jody workin' with you on this by any chance?

[Waylander]

were can we see these in the flesh?
one small design problem, its not a V twin!!
Not all choppers have to be Vtwins mate. Seen a few with inline fours, inline twins, tripples. Hell even a radial engine of an old prop plane.

[98tls]

Not my cup of tea but hey if it spins your wheels go for it...would much rather see people riding one of these than those bloody mini-choppers that wobble down the road pissing everybody off..........

[Waylander]

Not my cup of tea but hey if it spins your wheels go for it...would much rather see people riding one of these than those bloody mini-choppers that wobble down the road pissing everybody off..........
Had one of those loose it's footpeg right infront of me the other day. Slapped the guy on the back of the head as I rode buy for being such a fool and nearly taking me out when he stopped suddenly.

[imdying]

Not my cup of tea but hey if it spins your wheels go for it...would much rather see people riding one of these than those bloody mini-choppers that wobble down the road pissing everybody off..........
Agreed. At least this is big enough to be seen.

[98tls]

Not all choppers have to be Vtwins mate. Seen a few with inline fours, inline twins, tripples. Hell even a radial engine of an old prop plane. been some bloody nice choopers made with trumpy motors.....

[jonbuoy]

Can't blame a guy for trying to make a buck. At least its got two wheels. 10K would buy you a pretty good second hand bike though.

[Sketchy_Racer]

I'm not a chooper kind of guy, But they do look classy.

How cool would it be to be on your learners cruising around on one of them!!!!

Good luck selling mate!

[MattRSK]

HEY GUYS CHECK OUT THE HOTTEST NEW BIKES ON THE STREET

:yes: :gob:

http://www.trademe.co.nz/a.asp?id=75586298

The hottest new bike on the street? You do know that the Triumph 675 has been released!

[PITBULLMC]

Sorry guys let me re phrase that hottest new 250 on the street.

thanks for your support.

also please know that these bikes have a 400 strong dealer network in the states and a 2 year unlimited mileage warranty, no other comparable 250 bike offers that in the U.S :rockon:

[PITBULLMC]

Also the bike will be retailing well under 10k more around the 7500-8000 mark

[Waylander]

Sorry guys let me re phrase that hottest new 250 on the street.

With an engine desing dating back to mid eighties I believe man.

But I'll tell you, I would have preferd to ride one of these than the other bike with that engine.

[degrom]

Also the bike will be retailing well under 10k more around the 7500-8000 mark

What kind of market will you have against the All Mighty GN250 at $3500?

As I see it. I would rather buy a new GN and chop it... But I can't get it over my hart using a 250 as a chopper.(It's like using a lawn mower engine as a motor for a tour bike.)

[riffer]

It's like using a lawn mower engine as a motor for a tour bike.

You've never ridden a Road King have you Bert? :dodge:

[Brett]

Also the bike will be retailing well under 10k more around the 7500-8000 mark

Good on you with the entreprenuerial spirit. Welcome to KB, hang around here for more than just marketing, because it is actually a pretty sweet place.

If you offer a good product, you could do quite well. Just remember that with bikes quality is key, because human bodies are fragile, and bikes can be very very ficcle.

I hope that you do well.


With an engine desing dating back to mid eighties I believe man.

But I'll tell you, I would have preferd to ride one of these than the other bike with that engine.


Come one mate, half the choppers around the world are running older design motors.
How complicated can you make a single cyclinder, carbie piece of piss motor? It is also nice because you can do all the necessary work yourself, even the internal engine componenetry is very basic.

[Waylander]

Come one mate, half the choppers around the world are running older design motors.
How complicated can you make a single cyclinder, carbie piece of piss motor? It is also nice because you can do all the necessary work yourself, even the internal engine componenetry is very basic.
Single Cylinder?

Have a closer look mate, that's an inline twin. Infact that motor looks like the one in my Honda Rebel. Even talking to PITTBULL back when this thread first started, it's actually a copy of the Rebel Engine.

Funny that you mention simple too. Could you perhaps tell me how to swap the top part of the motor out? the bit that the carbs and exhaust connect to, Including all torque settings and where the timing marks and such are. Need to know so I can fix my 250 and make it ridable again.

[buythisone]

IF ANYONES INTERESTED JUST SEND AN EMAIL THROUGH THE TRADEME LINK,
OR CALL ME ON 021 752 612.

CHEERS

MATT
Pitbull Motorcycles
Hi Matt,
I am not sure if the below link your site www.pitbullmotorcycles.co.nz, I found some nice models on it.
Have a nice day.
Best regards,
Fred
Email: fred.zhang1981@gmail.com

[turtleman]

Fred !! ???

In China, no less !!

WTF ?