NSR parts supplier needed (desperately)!!!

[centaurus]

I have a Honda NSR 250 MC18 with a defective oil seal between the crank case and the clutch. I tried buying one from the shop but apparently Honda Japan doesn't produce this part anymore.

After searching everywhere, I found a bike shop in Northland who supposedly knew an overseas company which makes this part. I ordered the part a month ago, with an ETA or 2-3 weeks. Today I've just called the shop again and there is still no delivery date or other details. I am starting to suspect they haven't even ordered it and are just pulling my leg (they required payment when the order was made).

Does anybody know where can I find this part? NSR owners - where do you buy your "hard to find" parts from? I've heard there are companies in UK that manufacture parts that Honda doesn't make anymore, but I don't have any details.

[Brian d marge]

Have a look on this list for NSRPAUL ,,he may be able to help
Stephen

[onearmedbandit]

Have you tried searching UK 2 stroke forums? There is a wealth of info in those sites.

[Mr. Peanut]

Part number 91206-KV3-003?

I can get you that for about $60.

It's not the part that's expensive (about $5) it's the shipping :sick:

[rogson]

Try these guys - parts to send NSRs into orbit.

http://tyga-performance.com/site/product_info.php?products_id=45

[nsrpaul]

tyga are the go, or go to www.nsr-world.con , use the online parts manual to get the part numbers and order off your dealer or if ya want a cheaper deal order of www.echonohonda.co.nz

or check out tsr's website

[jade]

http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-accessories/Engine-drive-train/auction-91263732.htm

[pete376403]

If its a conventional lip seal you could triy local engineering suppliers? Eg Paykels, Schrodoco, Petch Seals, etc. Take the old one along and ask if they can match it.

[scracha]

I have a Honda NSR 250 MC18 with a defective oil


Speak to Neil at Econohonda (07 884 8810). Last time I was in there (fixing their bloody PC's again) he muttered something about specialising in NSR parts.

[centaurus]

Part number 91206-KV3-003?

I can get you that for about $60.

It's not the part that's expensive (about $5) it's the shipping :sick:

I don't know the part number. what would be the best way to find it? (one of the first shops where I was looking for the part almost ordered the wrong one)

[glen85]

Neil gow at econohonda has got a full parts listing and most likly have it on the shelf ive been dealing with him for my nsr and he has sorced most of the parts

[Paulus]

Haven't needed to look for a while but www.partsfish.com used to have all the manufacturer parts catalogues online. Don't know about the NSR as it really was only a Japanese domestic market bike.

[centaurus]

If its a conventional lip seal you could triy local engineering suppliers? Eg Paykels, Schrodoco, Petch Seals, etc. Take the old one along and ask if they can match it.

I already tried. Unfortunately most of the seals that they have are single-lipped. There is a very small selection of double-lip oil seals and until now I couldn't find anything close to the specifications I need.

[Mr. Peanut]

Have a look in here, and let me know the part number.

9/10 I can get your part, but it wont be cheap, I'll do my best! :mellow: