View Full Version : Need all the help I can get please...
Morcs
18th March 2007, 10:55
Right, I need my VFR back on the road asap, and as cheaply as possible. I also want it ready in time to book Taupo.
Parts I need:
(for '92 nc30 VFR400r)
*Rear brake lever/pedal thingy
*Bar ends (only if in good nick, mine are scraped but useable)
*Left handle bar (or if anyone can straighten it?)
*Entire front fairing (including lowers, its a 1 piece fibreglass, either repair or anyone got fairings lying around?)
*Front mudguard (or if anyone knows how to fix a scraped one?)
*Exhaust (standard or aftermarket, must be good nick, will pay $$$ for an aftermarket...)
I think thats about it, i havent seen my bike in a week so may have forgot a few things...
Post in this thread or pm me if you can help in anyway.
Cheers,
Pete :)
Macktheknife
18th March 2007, 11:25
Right, I need my VFR back on the road asap, and as cheaply as possible. I also want it ready in time to book Taupo.
Parts I need:
(for '92 nc30 VFR400r)
*Rear brake lever/pedal thingy
*Bar ends (only if in good nick, mine are scraped but useable)
*Left handle bar (or if anyone can straighten it?)
*Entire front fairing (including lowers, its a 1 piece fibreglass, either repair or anyone got fairings lying around?)
*Front mudguard (or if anyone knows how to fix a scraped one?)
*Exhaust (standard or aftermarket, must be good nick, will pay $$$ for an aftermarket...)
I think thats about it, i havent seen my bike in a week so may have forgot a few things...
Post in this thread or pm me if you can help in anyway.
Cheers,
Pete :)
Questions:
Is the fairing still in one piece?
I can show you and help you to repair it if it is not too bad.
What is the damage to the front mudguard?
If it is only scratched then I can show you how to fix it.
How bent is the l/h bar?
I have a vice and can show you how to sort this out, but only if it is not a pretzel.
Let me know if this is helpful to you
Mack
Disco Dan
18th March 2007, 11:38
Right, I need my VFR back on the road asap, and as cheaply as possible. I also want it ready in time to book Taupo.
If you can get the bike to my place, I have more tools and machinary than you can shake a stick at...
I have glass fibre repair kits for your fairings and can straighten bits etc...
Let me know, your welcome to store at mine in my garage and work on it etc.. ?
Morcs
18th March 2007, 11:41
Questions:
Is the fairing still in one piece?
I can show you and help you to repair it if it is not too bad.
What is the damage to the front mudguard?
If it is only scratched then I can show you how to fix it.
How bent is the l/h bar?
I have a vice and can show you how to sort this out, but only if it is not a pretzel.
Let me know if this is helpful to you
Mack
Cheers Mack, Yes it is helpful exept I am un-able to do anything physical as only have the full use of one hand...
Morcs
18th March 2007, 11:47
If you can get the bike to my place, I have more tools and machinary than you can shake a stick at...
I have glass fibre repair kits for your fairings and can straighten bits etc...
Let me know, your welcome to store at mine in my garage and work on it etc.. ?
Didnt see ya post there dude, But yeah sounds like a plan. Though any paint work I will insist on doing... :P
Disco Dan
18th March 2007, 11:49
Didnt see ya post there dude, But yeah sounds like a plan. Though any paint work I will insist on doing... :P
Ok no problem. Is it ridable? even at 10-20kph? if not where is it now? I have access to a car and we can hire a trailer for $20 and get it to mine to work on it..
Morcs
18th March 2007, 12:02
not rideable due to the clutch lever. Its easily move able though.
Im thinking of asking cyclespot (who have it) to spend an hour going over the more important bits - engine and structure. Then we could pull it out.
Disco Dan
18th March 2007, 12:06
Ok dude...
PM sent.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.