Newbie question

[Pushbike]

Ok, so I've got a bike. It's the first thing mechanical I've ever owned.

It's a 1985 Yamaha sr 185. It's got just over 35k on the clock.

What, on the general scale of things, should I be doing and how regularly should I be doing said things to make sure it keeps running efficently and safely?

I realise this is a very general question, but please take into account I don't know jack. I know you have to put oil in it, put petrol in it (although I've yet to use a pump in my life time. Should be an embarrising experience when I do) and charge the battery once in a while, but what else?

Thanks, Hamish

[Maha]

So much to add really.....
Keep the chain lubed....get a can from the Servo
Find the correct tyre pressure and keep i there...

there's two fundamental things....others can chip in....:rockon:

[MaPeXi]

Make sure you dont run the tyres bald (and arguably more important check you have the correct tyre pressure!) Keep the chain oiled with proper chain oil and if you see the chain getting shit in it like sand or dirt, use kerosene, and old toothbrush and an old rag to get it clean, then oil it moderatley. I change my oil every 4000km with good quality oil and an oil filter change every 3 oil changes. This is the way I do it and it varies for biker to biker and most likely you will not need to change your oil this regularly. Basically if your oil starts getting black and "tacky" its time for a change. Don't neglect the oil, it is one of the most important maintanence jobs and regular oil changes will see your bike running smoother and last longer in the long-term.

[XP@]

Before you set off:
1. Tires should be at the correct pressure (check when cold).
2. Loose nuts / bolts especially if work on bike has been done recently.
3. Stuff hanging off, tie downs etc.
4. Brakes function (when you are positioning it to get on use them to stop the bike)
5. Check oil & water occasionally
6. Engine sounds normal at idle

When start to ride:
1. Brakes work when going faster than walking pace.
2. Tires start cold and therefore have little grip.
3. Engine sounds normal under load
4. Bike is handling correctly (ie not vibrating or pulling heavily to one side or the other)

[surfer]

Before you set off:
1. Tires should be at the correct pressure (check when cold).
2. Loose nuts / bolts especially if work on bike has been done recently.
3. Stuff hanging off, tie downs etc.
4. Brakes function (when you are positioning it to get on use them to stop the bike)
5. Check oil & water occasionally
6. Engine sounds normal at idle

When start to ride:
1. Brakes work when going faster than walking pace.
2. Tires start cold and therefore have little grip.
3. Engine sounds normal under load
4. Bike is handling correctly (ie not vibrating or pulling heavily to one side or the other)

Add to this list, check the lights, indicators and stop lights. Check you fuel level too. And the big one of course...smile 'cause its fun.

[Macktheknife]

And always wear your gear, all the time.
Check your fluid levels every week, including oil, brakes, clutch (if hydraulic), water (if it takes it), check all aspects of the lights function and indicators, switches, tyres pressure and tread, find yourself a mentor on the site. We have heaps here and they can help you learn lots about your bike and riding.
Good luck

[Pushbike]

Thanks alot everyone, you've been a tremendous help!

[Dodgyiti]

Its a good simple bike, get a manual and learn as much as you can on this bike as the next one may be a little more complicated.
KB should have Mechanical Mentors too, when I bought my first Guzzi a nice chap on here helped me out big time.
If you plan to do something to it, study up and ask questions if you are unsure first.
Search this site on chain adjustment and suspension adjustment too- there has been some good stuff written.