Log in

View Full Version : Turtle wax ICE



NZsarge
6th April 2007, 11:59
Just quickly, I have just slapped some of this new fangled Turle Wax polish on the "Ace" and holy crap! :gob: my god it looks hot! Expensive ($50 from Supercheap) worth it? Yes. Very economical in application, very easy to apply, absolutely no white residue. It's a wipe on wipe off affair. Never has polishing the bike been so easy or quick with such excellent results. Turtle Wax "Ice": Recommended:yes: :done:

Delphinus
6th April 2007, 12:08
How much of a bottle did you use to polish the whole bike up? Ie whats it cost per application?

NZsarge
7th April 2007, 05:46
Used about 5mm of fluid out o the top of bottle so a reasonable guesstimate would be $3-4 per application for a bike. This would apply to a bike with an already reasonable shine to it's finish. You would ofcourse use more polish if the paint finish were poor ie: a restoritve job rather the a coat of polish to just maintain a good finish. If your paint is in good condition than by all means try this polish, I was really impressed. The metallic flec in the silver on my bike usually looks nice in the sun anyway but i think this polish gave it another lift to make it really stand out. I feel this polish would be best used for keeping an already decent finish at a high level, not as a restoritive polish, I think you would be better to head back to a polish with a cutting agent in it or if go see an automotive painter that you feel you can trust and get his/her opinion on what to use to get the finish back on your paint. I may update as the polish gets a bit more of a chance to weather but so far so good. Bottom line, at the moment my bike aint never looked so shiny :yes:

riffer
7th April 2007, 07:33
Yup. It's good stuff. :yes:

My profile pic shows the results.

DMNTD
7th April 2007, 07:43
My profile pic shows the results.

Niiiiiiice results mate :yes:


Re not using the expensive wax products for "older" looking paint...I simply utilise a cheaper yet good wax as the first layer then apply a top quality wax to give its final finish.
Works well and saves your expensive wax

Sanx
10th April 2007, 19:32
I find Mr Sheen works quite well :)

merv
10th April 2007, 19:36
I've alway sworn by Simoniz Liquid Diamond but ICE sounds better. I'll be buggered!!

Bnonn
13th April 2007, 15:30
How well does this stuff protect the surface it's applied to? I've been looking around for some wax or similar, not so much to make the bike look good (Fazers can't not look good), but so as to keep the paint protected and in good nick.

NZsarge
13th April 2007, 17:33
If in doubt always refer back to Simoniz Speedwax, just don't get it on black unpainted plastics (y'know, the crinkly finish type plastic) and i've alway found Simoniz liquid diamond to be a very good (sealer) wax too as Merv said. Theres a lot of good product out there but it really just boils down to trial and error and a good dose of personal preferance i guess. One of the best things about "ICE" is it's dead easy to apply, just make sure as with all silicone sealer waxes you must make sure your bike/car is spotless before you apply.

NZsarge
13th April 2007, 17:37
I must add as i'm thinking about it "ICE" was'nt very good at filling in scatches.