ZXR 250 Wheelie

[mynameis]

Not a bad effort aye, he does carry it a bit :

http://www.youtube.com/watch?v=q4tlref2f2c

Enjoy !

[skidMark]

it's a 750 or at least a 400

ive wheelied ,my zxr 250 heaps the revs arn't right bro

for the change in revs he is giving it at the speeds hes doing it is impossible for a zxr 250

only way to wheelie one is take it to about 5-6 k of revs so your going along in first then clutch in take it's to anywhere from 13 -18,000 and pop the clutch, once it's right up get to 19,000 hit 2nd gear and keep it pinned, speaking from experiance on this one.

[Mr. Peanut]

Agreed, a ZXR 250 wheelie is more like.

BAAAHHHHHHAHHHHHHH AHHHHHHHHHHHHH

[mynameis]

Blady hell, look at you two aye, Peanuts I have yet to see a decent two stroker wheelie, atleast they've got it. Weeeeeh put put ..

Now you're gonna say these two different bikes aren't 2 fidis as well?

http://youtube.com/watch?v=HRPFkw5lC_U

http://youtube.com/watch?v=5T_fm_gTec8

If you look carefully I think they have the technique right, of shifting your weight back and sticking the legs out to do that.

Right timing and proper clutch engagement and it's up, the "ZXR 250" also has a aftermarket exhaust and yeah I am a bit sceptical about the revs.

The second clip probably get's the best music award, sounds like porn music from the 80's lolz.

[skidMark]

the first vid of the two above,

i can do better wheelies than that on a zxr250a model, i put tzr250 clutch plates in it, added how do i say, a tad more...bite?

i did them sitting down though.....did from one set of lights to the next on k road once..... jc&eleanor can vouch for that LOL

shit 250's are fun for wheelies

my 400's more fun though...did a couple of wheelies on it with big graunch noises it went up, looked at it lates on...has about 3 teeth which arn't snapped off remaining....

i get the feeling my bike got a wee bit thrashed

[Mr. Peanut]

Blady hell, look at you two aye, Peanuts I have yet to see a decent two stroker wheelie, atleast they've got it. Weeeeeh put put ..

Right timing and proper clutch engagement and it's up, the "ZXR 250" also has a aftermarket exhaust and yeah I am a bit sceptical about the revs.

NSR's wheelie rather well.

I changed the music on this clip, it sounded like something off Top Gun. Sorry Indy.

<object width="425" height="350"><param name="movie" value="http://www.youtube.com/v/DyRB8f_z0Dg"></param><param name="wmode" value="transparent"></param><embed src="http://www.youtube.com/v/DyRB8f_z0Dg" type="application/x-shockwave-flash" wmode="transparent" width="425" height="350"></embed></object>

[mynameis]

NSR's wheelie rather well.

I changed the music on this clip, it sounded like something off Top Gun. Sorry Indy.



I was just pulling your leg, there isn't grounds for comparison, between the stroker and IL4. Especially, RS 250's um and the NSR :D

Anyone got clips of 250 wheelies of any Kbers?

[Brett]

I was just pulling your leg, there isn't grounds for comparison, between the stroker and IL4. Especially, RS 250's um and the NSR :D

Anyone got clips of 250 wheelies of any Kbers?

I have a few somewhere from my old ZXR. There is one on Youtube somewhere...but it missed most of the wheelie and only caught the last few seconds as I put it down.
But, for the record...ZXR's CAN WHEELIE. Anyone who doesn't beleive me, come visit me with your ZXR, or my new project one if it is running.

[Brett]

The wheelies in that Vid were shit...even for a 250 anyway!(the first clip that is, that guy was a tosser)