Need a hand here

[ajturbo]

i bet this is in the wrong part!.

but i need a valve spring compressor clamp thingy
for the cb125

i have the head and barrel off and they look ok, so i want to take the valves off and clean them up..
but i need a clamp to do it...

any one got one i could borrow.... have beer in fridge:Punk:

[et al]

I have a valve spring compressor - last used on a car well over 20 years ago but should still do the trick, providing I can find it in my garage.
Let me know if you want me to tear my garage apart for you (just joking - happy to go look for it if need be).

[ajturbo]

yes please... give me a call

0274595830

i'll pop over and pick it up ...some time ...sooooon

[Skunk]

Ya got one? I have one.

[Colapop]

I have a pair of pliers... and a hammer!

[SARGE]

*COUGH* (http://www.sulco.co.nz/Product?Action=View&Product_id=1276) ( i can set up a courier...)

[et al]

Ya got one? I have one.

I think he is sorted - I found mine (I think it is one of the two that Noah had on his Ark) and have phoned AJ, we are going to try and hook up tomorrow to hand it over. Skunk: maybe you can be "plan B" so if you like maybe you could call AJ tomorrow in case you can get yours (which may be from this Century) to him easier/quicker.

[crashe]

I think that I have one of those things hanging up at the back of my garage....

been hanging up there for years and years......

[mark247]

I have a valve spring compressor - last used on a car well over 20 years ago but should still do the trick, providing I can find it in my garage.
Let me know if you want me to tear my garage apart for you (just joking - happy to go look for it if need be).

Be careful, some car ones are too big for motorbike valves, i found that on my GB400. Or maybe im just unko?

[xwhatsit]

*COUGH* (http://www.sulco.co.nz/Product?Action=View&Product_id=1276) ( i can set up a courier...)

$180 for that! Jaysus Croits!

Surely they're like a $20 tool from Repco, or something? Not much more than a big G-clamp, really.

On a CB125 I would've thought the springs would be light enough to do it by hand, with a mate with pliers to pick out the split collets once they become free.

[Kickaha]

Get a tube socket the same size as the retainer and give it a bash with a hammer(you still might need the compressor to put it back together though)

[bungbung]

Supercheap will sell you one that'll do an xl/cb125 for $30 or so

[et al]

Be careful, some car ones are too big for motorbike valves, i found that on my GB400. Or maybe im just unko?
Yes - I thought so too and have warned AJ he might have to pack it out with something for the little CB head (a socket might do the trick).

[fergie]

my old man used to say that if you had a problem, hit it with a hammer, bigger the problem,bigger the hammer!

[babyB]

I have a pair of pliers... and a hammer!

:lol:i think its the bike that needs fixin Not Aj:shutup:

[Skunk]

If you've got a G clamp I can make it a valve spring compressor.