NSR250 and RS250 Bits and Pieces for sale [Melb]

[ChrisBurke]

Howdy,

I have some NSR250(MC21) and RS250 GP parts for sale -

I have a used TYGA GP fairing set, incl front guard, clear screen, upper, belly, tail, subframe, front H bracket. Has had various paint/attempts and will need a rub down before repainting - Im only asking $500 for this kit complete!

Also -

- 1 pair of Barrels both have minor score in them, good for replating.
- 1 pair of heads (SE/SP)(front and rear) with minor damage from piston failure, good for restoring.
- 1 pair of axles (front and rear).
- 1 pair of heads (SE/SP)(front and rear), perfect condition. SOLD
- 1 riders seat
- 1 complete rear brake setup, master, hose, caliper, bracket.
- 1 headlight
- 1 pair of standard chambers with silencers - in perfect condition.
- 1 radiator, great condition, some surface rust on the mesh. SOLD
- 2 pairs of OEM discs, in good condition. SOLD
- 1 pair of OEM rearsets in good condition
- 1 oil pump

- 1 complete frame and swing arm (MC21)(no shock) with Aus compliance (can be registered here).Im asking $500 for this

Pictures to come - reasonable offers considered.

This is a rare find -

This is a fully rebuilt Honda NSR250 (MC21SE) Dry Clutch Engine. Parts included in the rebuild - new crank, new top end (pistons etc), new clutch. Engine is now like new - has not been started or run in.
Includes everything in pictures (no carbs). SOLD

http://i12.ebayimg.com/03/i/000/b4/18/65c9_1.JPG
http://i24.ebayimg.com/01/i/000/b4/18/6469_1.JPG
http://i21.ebayimg.com/01/i/000/b4/18/6517_1.JPG
http://i15.ebayimg.com/03/i/000/b4/18/6676_1.JPG
http://i16.ebayimg.com/05/i/000/b4/18/672d_1.JPG
http://i9.ebayimg.com/05/i/000/b4/18/61a6_1.JPG
http://i21.ebayimg.com/03/i/000/b4/18/63dc_1.JPG
http://i20.ebayimg.com/03/i/000/b4/18/6b2f_1.JPG

Im looking for $3000 for this engine, but Im happy to negotiate. SOLD

'91mdl? Honda RS250 stuff -

- 1 steering dampener.
- 1 complete front end - theyre upside down, with Brembo calipers. The steer tube has been pushed out to make way for an NSR steer tube (forks currently fitted to a 21 frame) but I have the original RS steer tube also.
- 1 front 5 spoke Magnesium Marchesini 'Gira' - it has a few dings etc but nothing to worry about (from tyre changing etc). I believe it to be a 4 inch.
- 1 rear wheel (white) 5 inch.
- 1 rear 4.5 inch Magtek rear (Gold). SOLD
- 1 triple core radiator (few dings but is usable) SOLD
- 2 Pairs of OEM 296mm discs (suit VFR/RVF/RS) 1 set SOLD

And last but not least -

I have a complete MC21 which has the R model, wet clutch engine.

- Engine has just had top end build (pistons, etc) and has been run in.
- Bodywork is original white and blue/yellow with white tank and white wheels - Body is a bit rough and rashed on one side but could be cleaned up easily.
- Mechanically the bike is reasonable, and is in RWC condition.
- Mostly original condition except for the TYGA rearsets.

Its a good starting point - I have plenty of go fast goodies to go with if your interested, and can also arrange a better body/paintwork if needed.

Looking for $3500 - price neg based on rego/or not, etc - needs to go soon!

As always Im happy to ship where ever - just ask.

Pics will follow - need some time :-)

0438-611-137 or chris(at)bcomponents.com.au

Cheers

[ChrisBurke]

Update with some prices...

[NSR-Dan]

Hey Chris.

Daniel here from DS racing, NZ importer of tyga stuff.

wonder how much you want for the RS250 front end??

[ChrisBurke]

Daniel,

As a 'front end' Im including the legs, the clamps, the clipons pictured, the original steer tube, the front axle/spacers, the Brembo calipers and braided hoses you see in the pics - for this lot Im asking $1500 AUD.

You need to run 296mm Honda rotors (or equiv) which came off most 400 Honda from the time - CBR/VFR/RVF400. I can sell you the set pictured if you need them for $300 AUD.

You can run an original NSR wheel, or you can go to the wider VFR/RVF/RS wheel which has the same brake rotor bolt pattern.

The Magnesium Marchesini wheel in the pictures is very rare - but as with everything, its also for sale if you need it.

Some pics...


http://www.bcomponents.com.au/externalimages/ForAndy%20010.jpg

http://www.bcomponents.com.au/externalimages/ForAndy%20011.jpg

http://www.bcomponents.com.au/externalimages/ForAndy%20012.jpg

http://www.bcomponents.com.au/externalimages/ForAndy%20013.jpg

http://www.bcomponents.com.au/externalimages/ForAndy%20014.jpg


Hey Chris.

Daniel here from DS racing, NZ importer of tyga stuff.

wonder how much you want for the RS250 front end??

[Nsrrider]

Do you have an airbox that will fit an mc21

[motorcyclesonline.net]

Hello
Do you still have the Tyga bits - fairings etc - photos pls

www.motorcyclesonline.net



Howdy,

I have some NSR250(MC21) and RS250 GP parts for sale -

I have a used TYGA GP fairing set, incl front guard, clear screen, upper, belly, tail, subframe, front H bracket. Has had various paint/attempts and will need a rub down before repainting - Im only asking $500 for this kit complete!

Also -

- 1 pair of Barrels both have minor score in them, good for replating.
- 1 pair of heads (SE/SP)(front and rear) with minor damage from piston failure, good for restoring.
- 1 pair of axles (front and rear).
- 1 pair of heads (SE/SP)(front and rear), perfect condition. SOLD
- 1 riders seat
- 1 complete rear brake setup, master, hose, caliper, bracket.
- 1 headlight
- 1 pair of standard chambers with silencers - in perfect condition.
- 1 radiator, great condition, some surface rust on the mesh. SOLD
- 2 pairs of OEM discs, in good condition. SOLD
- 1 pair of OEM rearsets in good condition
- 1 oil pump

- 1 complete frame and swing arm (MC21)(no shock) with Aus compliance (can be registered here).Im asking $500 for this

Pictures to come - reasonable offers considered.

This is a rare find -

This is a fully rebuilt Honda NSR250 (MC21SE) Dry Clutch Engine. Parts included in the rebuild - new crank, new top end (pistons etc), new clutch. Engine is now like new - has not been started or run in.
Includes everything in pictures (no carbs). SOLD

http://i12.ebayimg.com/03/i/000/b4/18/65c9_1.JPG
http://i24.ebayimg.com/01/i/000/b4/18/6469_1.JPG
http://i21.ebayimg.com/01/i/000/b4/18/6517_1.JPG
http://i15.ebayimg.com/03/i/000/b4/18/6676_1.JPG
http://i16.ebayimg.com/05/i/000/b4/18/672d_1.JPG
http://i9.ebayimg.com/05/i/000/b4/18/61a6_1.JPG
http://i21.ebayimg.com/03/i/000/b4/18/63dc_1.JPG
http://i20.ebayimg.com/03/i/000/b4/18/6b2f_1.JPG

Im looking for $3000 for this engine, but Im happy to negotiate. SOLD

'91mdl? Honda RS250 stuff -

- 1 steering dampener.
- 1 complete front end - theyre upside down, with Brembo calipers. The steer tube has been pushed out to make way for an NSR steer tube (forks currently fitted to a 21 frame) but I have the original RS steer tube also.
- 1 front 5 spoke Magnesium Marchesini 'Gira' - it has a few dings etc but nothing to worry about (from tyre changing etc). I believe it to be a 4 inch.
- 1 rear wheel (white) 5 inch.
- 1 rear 4.5 inch Magtek rear (Gold). SOLD
- 1 triple core radiator (few dings but is usable) SOLD
- 2 Pairs of OEM 296mm discs (suit VFR/RVF/RS) 1 set SOLD

And last but not least -

I have a complete MC21 which has the R model, wet clutch engine.

- Engine has just had top end build (pistons, etc) and has been run in.
- Bodywork is original white and blue/yellow with white tank and white wheels - Body is a bit rough and rashed on one side but could be cleaned up easily.
- Mechanically the bike is reasonable, and is in RWC condition.
- Mostly original condition except for the TYGA rearsets.

Its a good starting point - I have plenty of go fast goodies to go with if your interested, and can also arrange a better body/paintwork if needed.

Looking for $3500 - price neg based on rego/or not, etc - needs to go soon!

As always Im happy to ship where ever - just ask.

Pics will follow - need some time :-)

0438-611-137 or chris(at)bcomponents.com.au

Cheers