PDA

View Full Version : Genuine HRC RS125GP Frame, swingarm and suspension linkages


Sketchy_Racer
2nd November 2007, 15:49
I am parting out my spare Honda 1997 RS125, as it not needed and I need the cash to get back out racing.

Details

The frame and swingarm have both been welded. They were welded by a professional welding company and have done a very good job. I have also set the frame up on the mill at work and checked for run out with a Dial test indicator. It is out of true by 1mm, which is impossible to notice.

There is a dent in the swingarm.

I have built this bike up after the repairs and raced it at Taupo raceway gaining a 2nd place finish in the 125GP class on it. There was no faults what so ever with the handling of the bike.

This would be the perfect frame for a bucket project, or even a Super mono F3 bike.

It is very very lightweight coming in at a mere 10.2KG

I have almost a complete bike to part out, so if you need anything let me know

Cheers,

Glen

PS. photo is not actual frame but same model
Skunk
2nd November 2007, 18:46
How much Mister?
koba
2nd November 2007, 19:07
#1745 Today, 19:43
Skunk
Newlands Elite (NWM supporter)

Bike: RD250, AX100, ZX1R, KH100, Z1000
Location: Newlands - Wellington
Posts: 3,705



Stop selling shit and do some work on ya bucket...



Followed by the aboue 3 minutes later!:lol:
Sketchy_Racer
2nd November 2007, 19:07
To be honest, i have no idea.

That picture i stole from a listing on ebay, and the seller there wants $650USD (he'll never get it) and his one had been welded too.

I was sorta hoping for a few hundred. Make an offer and i'll see what I can do :)
ajturbo
2nd November 2007, 19:29
i have $50....:niceone:
Slingshot
2nd November 2007, 20:06
i have $50....:niceone:

I'll give ya $51.
Sketchy_Racer
2nd November 2007, 20:06
well if you guys are gonna give $50 EACH with a few more people we should be able to sort a deal out :p
ajturbo
3rd November 2007, 21:11
$52.34 :apint:
quallman1234
3rd November 2007, 21:17
$52.34 :apint:

$52.35 :bash:
ajturbo
3rd November 2007, 21:24
how much for the table?
Skunk
3rd November 2007, 21:30
At least go up in $10 steps guys... This is his racing future you know.

$100. Out bid me.
xwhatsit
3rd November 2007, 21:47
Whoever buys that frame is getting ripped off.

Look at the size of it! 10kgs! It must be only half a frame and he's trying to trick you guys.
Sketchy_Racer
4th November 2007, 11:43
who ever buys that frame is getting a deal mate!

Very very few people in NZ actually own genuine "HRC" stuff. that alone is worth the coolness! (the same people that designed nicky haydens and dani pedrosas bikes)

Other wise its probably the best handling frame you can get your hands on in nz!
xwhatsit
4th November 2007, 13:28
It looks amazing. From the thumbnail picture (before I clicked on it) I could've sworn that was just a swingarm.

Somebody should buy it and put a 450 single in it.
Sketchy_Racer
4th November 2007, 14:34
Heck yeah. If I wasnt so desperatly trying to get some $$ together to get to nats, That is exactly what I would have done!!
Skunk
4th November 2007, 21:19
It looks amazing. From the thumbnail picture (before I clicked on it) I could've sworn that was just a swingarm.

Somebody should buy it and put a 450 single in it.
Or a 350-ish twin two stroke...
quallman1234
4th November 2007, 22:31
Or a 350-ish twin two stroke...

I like! RD350 Mmmmm
Kickaha
5th November 2007, 05:24
Or a 350-ish twin two stroke...

It wouldn't even get close to fitting, you'd be lucky if even a big four stroke single would
Skunk
5th November 2007, 11:52
Hacksaw...
k14
5th November 2007, 12:19
It wouldn't even get close to fitting, you'd be lucky if even a big four stroke single would
Nah they fit quite easily, just need to cut the engine mounts off and fabricate some yourself. Quite a few people have done it. There is a guy in the NI with a CRF450 engine in his 125 frame. Pretty cool, eats tyres to shreds though.