grease gun help plz

[dangerous]

Farking Guzzi in all there wisdom on the V11 have put a protective shell around the frount Uni joint on the drive shaft... now this cover prevents a grease gun from getting into the nipple, which is now 20,000k over due.

My Grease gun has a flexie hose and a grab on nipple attachment which isent any use if removed.
So has anyone got a right angled or 45* attachment, or a very small nossel, even a pointie needle end will do... I used to have one that you could remove the nipple grabber off and it left you with a needle point... that might work.

GAV... as the site Repco rep, is there anything I can buy from you guys???

Please help a Ginga out as Im not going anywere till I sort the problem... I know the streets wil be a safer place, but i wont be a happy bloodnut. :niceone:

[doc]

Farking Guzzi in all there wisdom on the V11 have put a protective shell around the frount Uni joint on the drive shaft... now this cover prevents a grease gun from getting into the nipple, which is now 20,000k over due.

My Grease gun has a flexie hose and a grab on nipple attachment which isent any use if removed.
So has anyone got a right angled or 45* attachment, or a very small nossel, even a pointie needle end will do... I used to have one that you could remove the nipple grabber off and it left you with a needle point... that might work.

GAV... as the site Repco rep, is there anything I can buy from you guys???

Please help a Ginga out as Im not going anywere till I sort the problem... I know the streets wil be a safer place, but i wont be a happy bloodnut. :niceone:

I think the best way to do it is to remove the wheel. In future do it everytime you change tyres.

[tri boy]

"Needle Point" fittings for your grease gun should be available from places like SKF bearings, Truck Stop truck agents etc. About $10-15.:niceone:

[dangerous]

I think the best way to do it is to remove the wheel. In future do it everytime you change tyres. it is out as I type and has been several times over the last 2yrs... thers no way n ell removing the wheel helps
cant drill a acess hole in the cover either as the nipple is a at right angles so access still wont happen.

[dangerous]

Just as an idea the nipple in pic1 is in the red circle the ble is the closet i can get the grease.
pic2 and its about were the blue dot is behind the red thing and in the black thing

[kiwi cowboy]

Just as an idea the nipple in pic1 is in the red circle the ble is the closet i can get the grease.
pic2 and its about were the blue dot is behind the red thing and in the black thing

wot a bitch of an arrangement. sombody wasnt thinking.
good luck hope you get it worked out:Punk:

[FROSTY]

TRY doing a search On Mcnaught. They do a huge range of quality grease guns and grease accessories -They had grease gun needles and all sorts of bits
Blackwoods/paykels stocked em a few years back.

[vagrant]

Farking Guzzi in all there wisdom on the V11 have put a protective shell around the frount Uni joint on the drive shaft... now this cover prevents a grease gun from getting into the nipple, which is now 20,000k over due.

My Grease gun has a flexie hose and a grab on nipple attachment which isent any use if removed.
So has anyone got a right angled or 45* attachment, or a very small nossel, even a pointie needle end will do... I used to have one that you could remove the nipple grabber off and it left you with a needle point... that might work.

GAV... as the site Repco rep, is there anything I can buy from you guys???

Please help a Ginga out as Im not going anywere till I sort the problem... I know the streets wil be a safer place, but i wont be a happy bloodnut. :niceone:


Did you get this sorted?

Would these greasepoints work? One has a grease nipple on the end and just plugs into the existing gun fitting, the other needs spannering to fit. It has a shroud for the point but I took it off for the piccy.

If they will work, PM me your address and I will bung em in the post.

[homer]

you will need to grease it again ..........so drill a hole itll be easier in the long run

[Sollyboy]

Just as an idea the nipple in pic1 is in the red circle the ble is the closet i can get the grease.
pic2 and its about were the blue dot is behind the red thing and in the black thing

Fuck me , what sort of tractor is that ?

[dangerous]

Fuck me , what sort of tractor is that ?

thems fighting words fark ya :apint:


Did you get this sorted?yeah I did thanks, that top tip is what I went for in the end, it wouldnt quite get in so I ground the smaler hex to round and... just :2thumbsup

[vagrant]

yeah I did thanks, that top tip is what I went for in the end, it wouldnt quite get in so I ground the smaler hex to round and... just :2thumbsup

Good to hear.:done: