Tools for sale

[Disco Dan]

Need to sell a few items before I move house, so heres your chance to get some stuff really cheap!!!

Only catch, is you need to be quick and pick up from Ranui.


Wheel Ramps
Air Compressor
Bolt Cutters
Crow Bar
Lawn mower engine


Wheel ramps are "as new" for a cage - $20

Air Compressor, only used every now and again to pump up tires and a short paint run :sweatdrop Comes with 10m air hose and cheap paint gun - all this for $100

Bolt Cutters now these are huge - they are about 5 foot long and will pretty much cut through anything that will fit in the jaws. - $20

Crow Bar - 'full size' and mint condition - $20

Lawn Mower engine - 4 stroke engine 'goes' no idea of HP just needs a new fuel line from tank to carb. Bolted to a bit of wood, was going to be used as a generator but never finished. $10

Send me a PM or drop me a line (those of you who have my new number).

This stuff needs to be gone by next wednesday.

[MSTRS]

Keep the bolt cutters for the 'civil disobedience' portion of the cheesecutter campaign....

[Disco Dan]

Keep the bolt cutters for the 'civil disobedience' portion of the cheesecutter campaign....

Yes, its sort of like the "everything you need to sort out the cheesecutters" list isnt it! ;)

I have no use for all this stuff now, so it is time for it all to go.....

[Qkchk]

Did you manage to sell the mini?

[Disco Dan]

Did you manage to sell the mini?

Not yet. Had a slight 'hiccup' getting paperwork off a certain person but hopefully that is sorted now. Waiting on two people to make a decision and one person who PM'd me is yet to come around to view.

[The Stranger]

Need to sell a few items before I move house, so heres your chance to get some stuff really cheap!!!

Only catch, is you need to be quick and pick up from Ranui.


Wheel Ramps
Air Compressor
Bolt Cutters
Crow Bar
Lawn mower engine


Wheel ramps are "as new" for a cage - $20

Air Compressor, only used every now and again to pump up tires and a short paint run :sweatdrop Comes with 10m air hose and cheap paint gun - all this for $100

Bolt Cutters now these are huge - they are about 5 foot long and will pretty much cut through anything that will fit in the jaws. - $20

Crow Bar - 'full size' and mint condition - $20

Lawn Mower engine - 4 stroke engine 'goes' no idea of HP just needs a new fuel line from tank to carb. Bolted to a bit of wood, was going to be used as a generator but never finished. $10

Send me a PM or drop me a line (those of you who have my new number).

This stuff needs to be gone by next wednesday.

Are the bolt cutters brand name jobs please?

[Disco Dan]

Are the bolt cutters brand name jobs please?

Yes - and the same ones you used to whack the flywheel off my mini engine that time... :whistle:

[Pumba]

Might bee keen on the compressor, PM Sent

[vifferman]

Iffen the Pumba don't take it, I will.

[The Pastor]

doh, if pumba and vifferman somehow dont want ur compressor i'd be keen to take it off you :D

if only i was slacking around more often at work, i would off seen this thread eariler.

[vifferman]

if only i was slacking around more often at work, i would off seen this thread eariler.
What are you trying to say? Are you implying I spend all day frequenting this website of iniquity? :shifty:

[The Stranger]

Yes - and the same ones you used to whack the flywheel off my mini engine that time... :whistle:

I didn't whack off your flywheel - I removed it. There is a big difference.

I should have asked about the crow bar too. However if it is a 6' (or thereabouts) bar I will take both the bar and bolt cutters please if they are still available.

[vifferman]

I didn't whack off your flywheel
Hey!
Keep it seemly. This is a family motorbicycling website, not some gay masturbatorial pron sleazepit. :Pokey:












Yeah, I'm bored. Really scraping at the bottom of the barrel now...

[Disco Dan]

Might bee keen on the compressor, PM Sent

PM sent !



I didn't whack off your flywheel - I removed it. There is a big difference.

I should have asked about the crow bar too. However if it is a 6' (or thereabouts) bar I will take both the bar and bolt cutters please if they are still available.

PM sent.

Oh yes, removed :yes:

[Disco Dan]

Iffen the Pumba don't take it, I will.


doh, if pumba and vifferman somehow dont want ur compressor i'd be keen to take it off you :D

if only i was slacking around more often at work, i would off seen this thread eariler.

Will let you two know if Pumba does not take it.

[Disco Dan]

Bolt Cutters and Crow Bar are sold.

Awaiting reply from Pumba regarding compresor. If no reply by tomorrow then I will go on to next person....

[Pumba]

Hey mate I will pass on the compressor, dont think your going to have to much trouble getting rid of it though.

[Disco Dan]

Hey mate I will pass on the compressor, dont think your going to have to much trouble getting rid of it though.

All good, no worries.



Iffen the Pumba don't take it, I will.

Your up dude. Still keen?


doh, if pumba and vifferman somehow dont want ur compressor i'd be keen to take it off you :D

if only i was slacking around more often at work, i would off seen this thread eariler.

RM looks like you could still be in the runnings for it..