KB stickers [Archive] - Kiwi Biker forums

View Full Version : KB stickers

SpankMe

9th August 2003, 22:44

Sent out the following email to many Auckland printers.

I am looking into having some stickers made for my Kiwi Biker web site. I have attached an image of what I want the sticker to look like.

The attributes of the sticker is as follows:

The sticker would be slightly larger than the pre-cut removable part.
The removable sticker will have rounded corners like the attached image.
The removable sticker will have a width of 100mm.
Since they are going to be stuck on bikes & helmets, must be waterproof.
What is the minimum number that can be ordered and what is the cost. Also does the cost change the more I order?

and have received the following quotes.

SpankMe

11th August 2003, 15:12

<h1>Ultra Print</h1><table cellspacing="0" cellpadding="4" width="600"> <tr> <td>Job</td> <td colspan="7">Kiwi Biker stickers printed 2 colours (yellow and black ) die cut with rounded corners and a 10mm peel strip all around label.</td> </tr> <tr> <td></td> <td></td> <td></td> <td></td> <td></td> <td></td> <td></td> <td></td> </tr> <tr> <td>Material</td> <td colspan="4">White S/A Vinyl Removable</td> <td colspan="2">Finished Size</td> <td>100 x 100</td> </tr> <tr> <td></td> <td></td> <td></td> <td></td> <td></td> <td></td> <td></td> <td></td> </tr> <tr height="26" style="height:19.5pt"> <td>Quantites</td> <td align="right">500</td> <td align="right"></td> <td align="right">1000</td> <td align="right"></td> <td align="right">2500</td> <td align="right"></td> <td align="right">5,000</td> </tr> <tr> <td></td> <td align="right"></td> <td align="right"></td> <td align="right"></td> <td align="right"></td> <td align="right"></td> <td align="right"></td> <td align="right"></td> </tr> <tr> <td>Production</td> <td align="right">$852.92</td> <td align="right"></td> <td align="right">$909.17</td> <td align="right"></td> <td align="right">$1,169.93</td> <td align="right"></td> <td align="right">$1,547.80</td> </tr> <tr> <td>Plates</td> <td align="right">$100.00</td> <td align="right"></td> <td align="right">$100.00</td> <td align="right"></td> <td align="right">$100.00</td> <td align="right"></td> <td align="right">$100.00</td> </tr> <tr> <td>Film</td> <td align="right">$126.50</td> <td align="right"></td> <td align="right">$126.50</td> <td align="right"></td> <td align="right">$126.50</td> <td align="right"></td> <td align="right">$126.50</td> </tr> <tr> <td>Proof</td> <td align="right">$35.00</td> <td align="right"></td> <td align="right">$35.00</td> <td align="right"></td> <td align="right">$35.00</td> <td align="right"></td> <td align="right">$35.00</td> </tr> <tr> <td>KNIFE Knife is an estimate only</td> <td align="right">$250.00</td> <td align="right"></td> <td align="right">$250.00</td> <td align="right"></td> <td align="right">$250.00</td> <td align="right"></td> <td align="right">$250.00</td> </tr> <tr> <td></td> <td align="right"></td> <td align="right"></td> <td align="right"></td> <td align="right"></td> <td align="right"></td> <td align="right"></td> <td align="right"></td> </tr> <tr> <td>TOTAL</td> <td align="right">$1,364.42</td> <td align="right"></td> <td align="right">$1,420.67</td> <td align="right"></td> <td align="right">$1,681.43</td> <td align="right"></td> <td align="right">$2,059.30</td> </tr></table>

SpankMe

11th August 2003, 15:13

<h1>Capital Press</h1> Printed 2 colours Stock: 'Special' cast vinyl. (this stock is created for moulding to rounded surfaces such as helmets, etc. Care must be taken when applying.) Top cut with rounded corners Plate estimate from disc supplied to our specs.  <table border="0" width="600" cellspacing="0" cellpadding="4"> <tr> <td width="20%">Qty:</td> <td width="20%" align="right">200</td> <td width="20%" align="right">400</td> <td width="20%" align="right">600</td> <td width="20%" align="right">800</td> </tr> <tr> <td width="20%">Plates:</td> <td width="20%" align="right">$208.00</td> <td width="20%" align="right">$208.00</td> <td width="20%" align="right">$208.00</td> <td width="20%" align="right">$208.00</td> </tr> <tr> <td width="20%">Printing:</td> <td width="20%" align="right">$461.00</td> <td width="20%" align="right">$563.00</td> <td width="20%" align="right">$674.00</td> <td width="20%" align="right">$778.00</td> </tr> <tr> <td width="20%">Total (plus gst)</td> <td width="20%" align="right">$669.00</td> <td width="20%" align="right">$771.00</td> <td width="20%" align="right">$882.00</td> <td width="20%" align="right">$986.00</td> </tr></table>

SpankMe

11th August 2003, 15:13

<h1>INKSPOT PRINT</h1>
We have an economical digital vinyl label option for very short quantities.
There are however some limitations - no diecut, no radius corners.

colour _100mm square. on long life pvc vinyl.
100 x labels = $ 230.00 +gst _________$2.30 each
200 x labels = $ 380.00 + gst ________$1.90 each

sample available on request.

SpankMe

11th August 2003, 15:27

<h1>Artrite Print</h1>
<table border="0" cellspacing="0" cellpadding="4" > <tr> <td valign="top" > Description: Self adhesive labels. </td> </tr> <tr> <td valign="top" > Size: 100mm x80mm </td> </tr> <tr> <td valign="top"> Quantity: a) 250     b) 500    c) 1,000 </td> </tr> <tr> <td valign="top"> Colours: 2 colours 1 side </td> </tr> <tr> <td valign="top"> Stock: White pvc  s/adhesive long life. </td> </tr> <tr> <td valign="top"> Finishing: kiss cut to shape. </td> </tr> <tr> <td valign="top"> Printing: a) $398.00    b) $496.00    c) $692.00 </td> </tr> <tr> <td valign="top"> Art/film: $270.00 </td> </tr> <tr> <td valign="top"> Plates: N/A </td> </tr> <tr> <td valign="top"> Die: $130.00 </td> </tr> <tr> <td valign="top"> These Prices exclude G.S.T. </td> </tr></table>

Duke of Rogan

11th August 2003, 16:37

bugger.
going by the last quote: to make it worthwhile and cost effective you would need to order atleast 500, at a cost of about $1.50 each, and have the dosh in first from all interested.

so it probably won't happen?

maybe we can buy our own waterproof sticker paper and put it through a PC printer...

SpankMe

11th August 2003, 16:39

I printed off my own stickers at home, but the ink runs when it gets wet. :(

Antallica

11th August 2003, 16:43

:gob: Yeah looks like a ghetto approach will be in order....

Coldkiwi

11th August 2003, 17:29

maybe we just get some XXXXL tshirts printed and wear them over our riding gear? :D

 

Racey Rider

11th August 2003, 18:54

Originally posted by Duke of Rogan
maybe we can buy our own waterproof sticker paper and put it through a PC printer...

Thanks for checking Spank.
I have made signs with my printer then had them laminated to make them waterproof. Would laminating be of any help in this sticker project?

Thou I wouldn't mind paying $2.30 each + GST for a few Re: Inkspot quote.

"There are however some limitations - no diecut, no radius corners. "

Is that Bad???

Gixxer

12th August 2003, 12:53

Can the group that are doing the T's not use the same plate for the stickers? .

would buy a few of inkspot stickers.

SpankMe

12th August 2003, 17:32

No, shirts are printed from a screen which is material stretched between a square wooden frame.

SpankMe

12th August 2003, 17:35

Originally posted by Racey Rider
"There are however some limitations - no diecut, no radius corners. "

Is that Bad???

diecut - Where the removable part of the sticker is cut smaller than the full sticker size. Makes it easy to remove.

radius - The corners of the removable sticker has rounded corners to match the logo.

SpankMe

12th August 2003, 17:42

<h1>DSP Group</h1>
<table border="0" cellpadding="4" cellspacing="0" style="border-collapse: collapse" bordercolor="#111111" width="761"> <tr> <td width="87">Description:</td> <td width="658">Kiwibiker Vinyl Sticker - 2C</td> </tr> <tr> <td width="87">Artwork:</td> <td width="658">Film supplied to DSP Specifications or extra (4up on 233x250mm Press sheet)</td> </tr> <tr> <td width="87">Printing:</td> <td width="658">Screen print 2 colours 1 side on white self adhesive vinyl.</td> </tr> <tr> <td width="87">Finishing:</td> <td width="658">Diecut with rounded corners using new knife, pack & deliver to one Auckland address.</td> </tr></table>**Supplied as 4up sheets**<table border="0" cellpadding="2" cellspacing="0" style="border-collapse: collapse" bordercolor="#111111" width="500"> <tr> <td>Quantity:</td> <td>100 </td> <td>200 </td> <td>500 </td> </tr> <tr> <td>Price:</td> <td>$761.00</td> <td>$780.00</td> <td>$815.00</td> </tr></table><ul> <li>Please note that author’s corrections may result in additional charges to the above estimates.</li> <li>The estimate includes delivery to one Auckland address.</li> <li>The estimate is valid for 90 days from the above date.</li> <li>All prices are exclusive of G.S.T.  </li></ul>

SpankMe

12th August 2003, 17:48

<h1>DPOD</h1>
Description: Kiwibiker Sticker. Size : 100x80mm. Printed 4 colour process 1 side onto Vinyl Self Adhesive stock. Diecut (NEW cutting forme required) and Pack.<div align="center"> <center> <table border="1" cellpadding="8" cellspacing="0" style="border-collapse: collapse" bordercolor="#111111" width="70%"> <tr> <td width="20%" align="center">QUANTITY:</td> <td width="20%" align="center">50</td> <td width="20%" align="center">100</td> <td width="20%" align="center">250</td> <td width="20%" align="center">500</td> </tr> <tr> <td width="20%" align="center">PRICE:</td> <td width="20%" align="center">$293.00</td> <td width="20%" align="center">$310.00</td> <td width="20%" align="center">$357.00</td> <td width="20%" align="center">$440.00</td> </tr> </table> </center></div>All prices are subject to freight and GSTColour Proofs additional $10 + GST per A3 page (1−3 pages), additional pages POA

SpankMe

12th August 2003, 18:03

<h1>Mono Graphics</h1><table border="0" cellpadding="5" cellspacing="0" style="border-collapse: collapse" bordercolor="#111111" width="745"> <tr> <td width="79" valign="top">Job Title:</td> <td width="658" valign="top">LABEL</td> </tr> <tr> <td width="79" valign="top">Details:</td> <td width="658" valign="top">2 COLOUR 1 SIDE + LAMINATED. SUPPLIED ON A ROLL PLATES FROM DISC SUPPLIED NB A RECTANGLE WILL NOT GO ONTO A ROUND OBJECT LIKE A HELMET WITHOUT CREASING AT THE EDGES SO I HAVE QUOTED ON A CIRCLE.</td> </tr> <tr> <td width="79" valign="top">Materials:</td> <td width="658" valign="top">90 GSM Gloss Removable Adhesive</td> </tr> <tr> <td width="79" valign="top">Size:</td> <td width="658" valign="top">100 CIRCLE</td> </tr></table> <table border="0" cellpadding="5" cellspacing="0" style="border-collapse: collapse" bordercolor="#111111" width="60%"> <tr> <td width="25%">Quantity:</td> <td width="25%">500 </td> <td width="25%">1000 </td> <td width="25%">2000 </td> </tr> <tr> <td width="25%">Film</td> <td width="25%">30.00</td> <td width="25%">30.00</td> <td width="25%">30.00</td> </tr> <tr> <td width="25%">Production</td> <td width="25%">266.00</td> <td width="25%">330.40</td> <td width="25%">462.00</td> </tr> <tr> <td width="25%">Net Price:</td> <td width="25%">296.00</td> <td width="25%">360.40</td> <td width="25%">492.00</td> </tr> <tr> <td width="25%">GST:</td> <td width="25%">37.00</td> <td width="25%">45.05</td> <td width="25%">61.50</td> </tr> <tr> <td width="25%">Total Price:</td> <td width="25%">333.00</td> <td width="25%">405.45</td> <td width="25%">553.50</td> </tr> <tr> <td width="25%">Price Per 1</td> <td width="25%">0.59</td> <td width="25%">0.36</td> <td width="25%">0.25</td> </tr></table><ul> <li>Prices do not include freight.</li> <li>These prices are subject to sighting final artwork.</li> <li>Any variations from the above specifications may alter the price.</li> <li>These prices are subject to stock availability at time of order.</li> <li>This Quotation (or order) is subject to standard printing terms of trade which are available on request.</li> <li>Price valid for one month.</li></ul></body>

aff-man

13th August 2003, 12:00

I'll be in for a couple but it looks like about 200 people are gonna need to get stickers unless they want like 10 each :beer: :beer:

Kwaka-Kid

21st August 2003, 21:48

 so what? id b keen for 10 stickers :)

all in the name of KB!

Antallica

22nd August 2003, 01:36

I'd be keen on 10-20 :D

Racey Rider

22nd August 2003, 08:29

I would like to see the stickers go ahead, but wondered if some of us could help out with the initial cost by way of a small loan into a kitty. If 10 of us were to loan say $30 each into a setup fund, that might help Spankme get it sorted. I would still buy my stickers ontop of the loan money, and as stickers sell, the loan money would be repaid to us. This would create a bit of paperwork and may be more hassel than it's worth, but just an idea worth thinking about.
On the other hand,, Spank may be made of money, and is just holding out on us?!! :rockon:

bikerboy

22nd August 2003, 13:12

That's a good idea but how about donations instead of loans. Twenty people donating $15, or thirty $10.

Or the people who loan/invest get the appropriate number of stickers per loan amount. They can take all or some of the stickers and the rest get sold in a pool. Once all stickers in the pool are sold the loan/investors get repaid.

I'm sure Spankme insn't made of money and has done a great service to us by creating this site free, so how about some donations. I'm sure any amount would be appreciated and helpful.:done:

Gixxer

22nd August 2003, 13:33

put me down for 10 of those 59cent stickers

babyB

23rd August 2003, 00:12

count me in for 20 of them stickers......(even at $1 they be cool)

 

aff-man

25th August 2003, 10:25

I'll be in for a few !!:rockon: