30mm m3 machine screws

[pzkpfw]

Anyone know who would stock 30mm M3 machine screws (bolts)?

All I've been able to find are 25mm.

This is to bodge my dishwasher front panel on, so it's posted here...


----

Added later: To avoid bump - THANKS for the replies. Will take advice. Cheers,

----

Made it work tonight, too many dishes to look at. Rubber band and plastic cup keep the door closed, clothes peg holds the "door is closed" switch closed.

[Sully60]

Anyone know who would stock 30mm M3 machine screws (bolts)?

All I've been able to find are 25mm.

This is to bodge my dishwasher front panel on, so it's posted here...

Good luck!

Have you tried EDL on Hutt Road?

:devil2: My six hundred and sixty sixth post :devil2:

[rudolph]

Have you tried that nut and bolt shop in lower hut, up the road from TSS under the bridge and left

[nodrog]

Anyone know who would stock 30mm M3 machine screws (bolts)?

All I've been able to find are 25mm.

This is to bodge my dishwasher front panel on, so it's posted here...

any palce that sells kitchen cupboard handles etc should have some M3's, but you will have to cut them down.

[dickytoo]

coastal fasteners at
38 Abel Smith St Wellington
or
4 Matiu Clo Porirua

They have all sorts of nut and bolts. very extensive selection and in stainless steel too, if required

[nudemetalz]

When I first read this, I thought I saw "30mm machine-gun" and thought,...mmmm this could be good !!!