jim.cox
27th February 2008, 09:07
Before I start looking offshore...
Does anyone know of a Christchurch or NZ supplier for Dellorto
I'm about to rebuild both carbs and need the usual o-rings and gaskets, plus outer-cable thimbles.
I'm also looking at doing the idle and main jets and needles
advTHANKXance
Jim
Does anyone know of a Christchurch or NZ supplier for Dellorto
I'm about to rebuild both carbs and need the usual o-rings and gaskets, plus outer-cable thimbles.
I'm also looking at doing the idle and main jets and needles
advTHANKXance
Jim