Streetfighters

[NOMIS]

Just to all the people out there with streetfighter bike,
Where can i purchase parts, i have been on www.nzstreetfighter.co.nz but nothing really grabs my attention for there prices, any one selling anything that would look cool on my hornet?:Punk:

Post some pics if you own one ! heres what i got and the sort of style im after, i have new bars now no headlight fairing, new bar ends ect

[NOMIS]

Also im after some usd's off a cbr with twin disks any one no if these bolt st8 on?? Brake set up fine i can work with that.

[Devil]

From that side on angle, that looks very similar to a GSXR 600/750 headlight, or a Bandit 1200 headlight (from the faired one). Both of these headlight units look pretty cool without their respective fairings (IMHO).
Try tracking down one of those. I wouldn't expect them to be too cheap though...

[NOMIS]

From that side on angle, that looks very similar to a GSXR 600/750 headlight, or a Bandit 1200 headlight (from the faired one). Both of these headlight units look pretty cool without their respective fairings (IMHO).
Try tracking down one of those. I wouldn't expect them to be too cheap though...

Yeh The Black bikes mine.

the other is farkin sexy. Cheers man yeh i was tinkering with the idea of trying to fit some hyabusa lens's. but will see what happens the belly pan and that does any one no who does fabricating?

[nodrog]

...does any one no who does fabricating?

you should contact tony - http://www.kiwibiker.co.nz/forums/member.php?u=9751

[NOMIS]

Cheers mate and yeh that a sexy bike of his

[nodrog]

Cheers mate and yeh that a sexy bike of his

he also sells all sorts of streetfighter bits.

[NOMIS]

he also sells all sorts of streetfighter bits.

Cool he expensive? i pm'd him has anyone else got photos of there street fighters? or naked bikes?

[nodrog]

Cool he expensive? i pm'd him has anyone else got photos of there street fighters? or naked bikes?

http://www.trademe.co.nz/Members/Listings.aspx?searchtype=SELLER&member=336872&mcat=0001-

heres a link to his stuff on trademe to get an idea of prices

[NOMIS]

http://www.trademe.co.nz/Members/Listings.aspx?searchtype=SELLER&member=336872&mcat=0001-

heres a link to his stuff on trademe to get an idea of prices

wont be able to view as sites blocked from work, will wait till i get home cheers!

[The Pastor]

Also im after some usd's off a cbr with twin disks any one no if these bolt st8 on?? Brake set up fine i can work with that.
err, cbr250's dont have usd.

[NOMIS]

err, cbr250's dont have usd.

Cheers, do the have twin disks? As you can see i self confess i dont no stuff all about bikes, im mechanically minded as i was a mechanic for 3 years but never on bikes. so out for any one to give me advice

[The Pastor]

The mc22 has twin disc. the cbr forks are average at best, maybe look at the adjustable nsr forks instead.

[NOMIS]

ok the front lights i want are like this any one no what they are?

[Squiggles]

looks similar to the MV Augusta Brutale, but still not the same....

[NOMIS]

The mc22 has twin disc. the cbr forks are average at best, maybe look at the adjustable nsr forks instead.

Cheers, yeh do you no if they would fit easily to the hornet? running brake lines ect not a prob but will the rest be a easy bolt up or is there a few stuff around thing todo?

[James Deuce]

ok the front lights i want are like this any one no what they are?
Definitely GSXR K5 onwards headlight unit. Bandit 1200/1250, GSX650F, GS500F also.

[The Pastor]

Cheers, yeh do you no if they would fit easily to the hornet? running brake lines ect not a prob but will the rest be a easy bolt up or is there a few stuff around thing todo?
no idea mate, never done it myself, I do know the nsr forks bolt onto the mc22 really easy. you will probably have to grind the stops off and re weld them back on, but thats easy. Anything can fit, its just a question of time skills and money.

Also when changing the forks on a bike, you are going to alter the rake trail settings etc etc. you might get worse handling etc etc.

[NOMIS]

no idea mate, never done it myself, I do know the nsr forks bolt onto the mc22 really easy. you will probably have to grind the stops off and re weld them back on, but thats easy. Anything can fit, its just a question of time skills and money.

Also when changing the forks on a bike, you are going to alter the rake trail settings etc etc. you might get worse handling etc etc.

Cheers does anybody no of a suspension shop in the Auckland area that specialize in this kind of thing as i dont want to go mucking around with things such as this not being able to gaurantee how the bike will be after, i have no problems doing the work my self, but as i only ever worked on cars and am not a suspension specialist i dont want to go stuffing around with something im not sure of

[NOMIS]

Definitely GSXR K5 onwards headlight unit. Bandit 1200/1250, GSX650F, GS500F also.

have been told that a couple of times now, now to find some with wiring harness complete.

[toebug]

Front ends cost around $1500 for a good set of usd's. Generally you just make shit fit using you head. What is your current fork diameter? You can buy top yokes billet ones for about $300 but if you dont want to spend too much some dirt bike yokes fit, I have KX250 ones on my 88 gixxer with a 99 R1 front end. Buy the whole front end, forks, wheel and brakes and use the whole set up rather than trying to retro fit your current brakes and wheels.

Our headlights might seem expensive, but try and buy a factory original! $500 for the likes of an R1 plus $300 for the top fairing, so in that sence they are reasonably. They are also DOT and SAE rated so will fly through a vin.

GP Honda in tauranga have lots of parts in stock as they are quite a large wrecker.

If you sign up to the NZSF site and post a pic of your bike and your ideas you will get plenty of feedback and ideas. We also have a club attched to the site and there is a run coming up in the last weekend of march if you are keen and there are plenty of fighter pilots in Auckland 3 of which work for bike shops.

[NOMIS]

Front ends cost around $1500 for a good set of usd's. Generally you just make shit fit using you head. What is your current fork diameter? You can buy top yokes billet ones for about $300 but if you dont want to spend too much some dirt bike yokes fit, I have KX250 ones on my 88 gixxer with a 99 R1 front end. Buy the whole front end, forks, wheel and brakes and use the whole set up rather than trying to retro fit your current brakes and wheels.

Our headlights might seem expensive, but try and buy a factory original! $500 for the likes of an R1 plus $300 for the top fairing, so in that sence they are reasonably. They are also DOT and SAE rated so will fly through a vin.

GP Honda in tauranga have lots of parts in stock as they are quite a large wrecker.

If you sign up to the NZSF site and post a pic of your bike and your ideas you will get plenty of feedback and ideas. We also have a club attched to the site and there is a run coming up in the last weekend of march if you are keen and there are plenty of fighter pilots in Auckland 3 of which work for bike shops.


Thanks alot mate yeh will do, yeh cruising the streets i dont tend to see many around, usd's idea sounds the go cheers

[R6_kid]

From the pics you posted you're gonna want an 04-06 R1 rear subframe and fairings and also a GSXR k4 600/750 headlight.

I'd say get on ebay while the dollar is high. Subframes are usually around $100US and if you get slightly damaged fairings they should be pretty cheap.

Would expect the GSXR headlight to be around $170-200US.

Like toebug said, try and find a complete front end if you can.

[NOMIS]

From the pics you posted you're gonna want an 04-06 R1 rear subframe and fairings and also a GSXR k4 600/750 headlight.

I'd say get on ebay while the dollar is high. Subframes are usually around $100US and if you get slightly damaged fairings they should be pretty cheap.

Would expect the GSXR headlight to be around $170-200US.

Like toebug said, try and find a complete front end if you can.

yeh thanks mate, either that or an r6 haha but due to my licence ill have to just play with my hornet for now.
I dont mind spending money but im not a bank and not gunna poor money into it but want to have some fun so will be doing it just on a budget. cheers everyone for the advice

[betti]

be aware that buying a headlight from the u.s, it will dip the wrong way .:crazy:

[James Deuce]

be aware that buying a headlight from the u.s, it will dip the wrong way .:crazy:

And will require the reflector to be changed to get it through a WoF.

[Ixion]

Unless you can turn it upside down.

[R6_kid]

be aware that buying a headlight from the u.s, it will dip the wrong way .:crazy:

Had no such problem with my R6 headlight unit...

You'll find these days that most motorcycle headlights are wide beam anyway... and the only difference between full beam and low beam is the vertical aspect (and lumination intensity) of the beam.

[n0regret5]

i'm gonna jump in on this one and fully bump you..i'm after an R6 tail section (2006-onwards) to chuck on my TL streetfighter project..
otherwise your plan looks pretty good, you'd probably be able to stick with an NC30/5 rear end too..and if you can find a cheap way of getting a gixxer headlight, hit me up! i really want one for my project too..got a cbr600rr headlight but its alot bigger than i want..

[NOMIS]

k guys i now have a k7 headlight im wanting to fit.
I wana no if any one out there is handy with a welder or has any mounting brakets i could possibly scrounge for free :-) or a good price. If i have to tamper with them thats fine.
Please let me no if any one can help. cheers
Simon. will post some pics when i got it all on.

[Mr Merde]

I have a GS1200SS Suzuki that I wasted the fairing by sliding down the motorway.

Now a discard.

Found a double set of HID lights from Aussie that are going to replace my stock versions

looking for a top yoke or some method of installing high bars rather than the clipons

The arse end and the body work are in progress and wioll be sorted as money permits.

This bike is going cosmetically to being a streetfighter then I start on the performance side of things.

[NOMIS]

[QUOTE=Mr Merde;1490614]I have a GS1200SS Suzuki that I wasted the fairing by sliding down the motorway.

Now a discard.
Rats, pics??? anything i can take for free???? :-) haha
post up some pics when u have all your goodies ect. any pics of damage done? Im just after some braket mounts i may be able to use