ZXR 250 A parts

[skidMark]

Hey guys, my zxr 250 a 2 is in a million bits, i am considering parting it if there is enough interest, please say in here what you need, as i say if enough bits are wanted i will part it.

Bits that would already be taken would be rear swingarm and forks. if you can beat what ive been offered they are yours, swingarm will also fit c model, same with the forks....

My offers ive had are $50 for the swingarm and $200 for the forks.

engine stuffed it's crank, but have pistons and 2 alternator covers.

I have 2 engines one is totally rooted threw a rod. only 3 good pistojns....valves in one cylinder are screwed ....

the other more recent motor did in the big end bearings on one of the middle cylinders and wore into the crank, but the head barrells etc are all still fine.

mint condition chain tensioner blade which had only been put in 1000km's before.

so it's a complete bike with a screwed motor, with another screwed motor too.

rego for frame is on hold, could be good to get a dereg bike back on the road. so i would want more than a dereg frame for this.


post your wish list here.

[EJK]

Finally you are selling it!

[skidMark]

Finally you are selling it!

As i say if there is not enough interest i will just drop another motor in it when i have the funds.

[bungbung]

Front wheel (bare)
Pillion seat

[skidMark]

Front wheel (bare)
Pillion seat


The front wheel is C model style (no idea why) by bare i assume you mean no discs or tyre.

How much you want to pay, per item. (can everybody else do this too)

Ps, front discs are near new, metal gear. still full width no major grooving etc, been on for about 6,000k's.

[EJK]

The front wheel is C model style (no idea why) by bare i assume you mean no discs or tyre.

How much you want to pay, per item. (can everybody else do this too)

Ps, front discs are near new, metal gear. still full width no major grooving etc, been on for about 6,000k's.

$5

+10 cha

[bungbung]

The front wheel is C model style (no idea why)

No good to me. C style uses different axle and fork lowers.

[skidMark]

No good to me. C style uses different axle and fork lowers.

You sure? Because mine is running A model forks. (a model has prongs off the forks to hold the mudguard.) pass lol

[bungbung]

Put up a photo showing the fork lower

[EJK]

You sure? Because mine is running A model forks. (a model has prongs off the forks to hold the mudguard.) pass lol

Cause its a USD fork? :lol:

[Brett]

Whole front end is A model / C model set up. Shocks and wheels.

[skidMark]

Put up a photo showing the fork lower

Sorry can't take any pics bike is at parents house.

[sidzstylez]

what state is your tank in? mines got a huge dent at the front where the handlebars went all the way round (im guessing) from the previous owner. Also looking for a front fairing so whats yours like? mine has a big chunk broken off from where i crashed it a while back. oh and last of all does urs have that metal brace that supports the mirrors? my mirrors are pretty shaky without it especially on the open road and when filtering thru traffic...

[skidMark]

what state is your tank in? mines got a huge dent at the front where the handlebars went all the way round (im guessing) from the previous owner. Also looking for a front fairing so whats yours like? mine has a big chunk broken off from where i crashed it a while back. oh and last of all does urs have that metal brace that supports the mirrors? my mirrors are pretty shaky without it especially on the open road and when filtering thru traffic...

tank has dents but they could be filled in....

front fairing is aftermarket fibreglass from just fairings in hamilton. has a little road rash that digs in on the right. but fixable with some epoxy resin.

yep got the mirror bracket. name hw much ya wanna pay...

[sidzstylez]

how does 90 bux for the front fairing and mirror bracket sound? do you have a front screen with it too?

[skidMark]

how does 90 bux for the front fairing and mirror bracket sound? do you have a front screen with it too?


I have a screen but it's an origional one so getting a bit yellow but has all kawasaki writing on it etc.

Front fairing new was $200 so ummm errrr, yeah i spose $90 would cover it, $20 more if ya want the screen.

the bike is the one in my signature picture below.

Anybody else want anything, if not much more is wanted i will keep it.

[randyp]

hey is stuff actually for sale or is it all maybe? I could be keen on a few bits which can spruce up my bike a little

[skidMark]

hey is stuff actually for sale or is it all maybe? I could be keen on a few bits which can spruce up my bike a little

It's maybe at this stage, there is no point in parting it out if only a few bits are wanted.

What would you need?

[Morcs]

My offer on the works wont be open long. 2 days max from now.

[skidMark]

My offer on the works wont be open long. 2 days max from now.

And that offer is?

[Morcs]

$200 for the forks. you have got till tomorrow.

Only need one fork, but will take the set

[Caladbolg]

Hey man the previous owner of my zxr dropped her on left side.. the engine cover that comes out thru the hole in the fairing looks like it took the hit. In the crash this cover cracked along the bottom edge. just wondering if you have a spare one sitting round?

[Mikkel]

Mark, I can't PM you. So I'll post it here instead.

What condition is your brake lever and bar ends in?

How about indicators?

[bungbung]

$120 for bare front wheel and pillion seat + freight to welli.

Turns out the C model uses the same sized axle, though the forks are different.

[Ramyy]

hey,

i would like to buy the mirrors, if they still available please get in contact on 0212340121.

[FXRDan]

Hey,

Did you end up breaking up the bike? If so I would be real keen to get my hands on a rear shock and some rear indicators if you have them.

Dan

[skidMark]

Mark, I can't PM you. So I'll post it here instead.

What condition is your brake lever and bar ends in?


How about indicators?

No indicators sorry, brake lever sold already


$120 for bare front wheel and pillion seat + freight to welli.

Turns out the C model uses the same sized axle, though the forks are different.


Sorry wheel is gone now but i still have pillion seat.

hey,

i would like to buy the mirrors, if they still available please get in contact on 0212340121.

I txt ya but no reply at the time, a friend bought em.


Hey,

Did you end up breaking up the bike? If so I would be real keen to get my hands on a rear shock and some rear indicators if you have them.

Dan

No rear indicators but i do have a rear shock, it genuine kawasaki upgrade shock, so has click wheel compression adjustment on it.... ooooo lala lol

PM me an offer.

bits of bike that are gone....

lower front fairings

entire front end = forks triplee clamps, front wheel, front tyre, front discs, axle speedo drive, SOLD

rear swingarm, main frame, rear wheel, rear brake disc, rear caliper mount. rear axle rear tyre SOLD. (still have rear brake assembly)

front brake lever and mirrors SOLD.

left footpeg hanger (gearshift side) hanger and gearshift lever are SOLD i still have the footpeg though.

Every other part of the bike other than those listed above i still have.

[bungbung]

How much for pillion seat + sent to welli?

[Caladbolg]

Any word on that package man?

[cowboyz]

werent your shocks fucked?

[sidzstylez]

hey is the top fairing still there with the mirror bracket thing? im still keen to pick those up

[skidMark]

hey is the top fairing still there with the mirror bracket thing? im still keen to pick those up


yep yep still got those :D pm me bro

[skidMark]

Bump. :Punk:.......

[Vacarious]

if the front forks are for A model ill consider them,

but im looking for a rear disc give you $40 for it

[skidMark]

if the front forks are for A model ill consider them,

but im looking for a rear disc give you $40 for it


Sold that stuff to corsa wreckers.

(09) 570 2982