PDA

View Full Version : RGV250L oil pump rigging



Hahn
5th April 2008, 12:57
Gidday,

I have re-rigged the oil pump to what said in the manual:
At half open carb the oil pump should be half open (alignment marks).

(It was giving half open at idle.)

Now with it rigged to the manual it is fully closed at idle.

Is this correct? is it still feeding oil or should I rig to give a little oil at idle?

Cheers

Hahn

ypvs kiwi
11th April 2008, 12:56
Hi - Set it up by the manual to the half way mark - aligned to half way on the carbs, take it out for a spin and then come back and re-check it - they can tend to move a little.

Hahn
11th April 2008, 17:53
Cheers mate :-)