Bucket bits 4 sale [Archive] - Kiwi Biker forums

Pages : [1] 2 3 4 5 6 7 8 9 10 11

Slingshot

12th May 2008, 20:03

Dear all,

I often find crap on Trade Me (http://www.kiwibiker.co.nz/forums/www.trademe.co.nz) and other various sites that I either can't afford or can't make use of but think that someone else could benefit from, so here's the deal...I'll post links to that shit in here if you do the same.

Mods...perhaps this could become sticky.

Kind regards,

Slingshot
Norf Welly Massif

Slingshot

12th May 2008, 20:04

And to get the ball rolling:

This could make an OK track hack, looks like the ignition is rooted but otherwise ok.
http://www.turners.co.nz/TabId/188/vguid/4DFB93E1-5360-4E93-B818-5EA2D5F34EA7/default.aspx

Damaged Honda CBR250rr (http://www.turners.co.nz/TabId/188/vguid/EAEEF639-193A-48F1-9704-CB5CDE3AB298/default.aspx) could be an alright chassis to work from.

Skunk

12th May 2008, 20:05

I'll be into that. First up 17" wheels and front brakes. Jimjim's two NZ250s are for sale at just $1250 and you can sell the rest of the parts. Or just keep one set of wheels and sell the complete going bike.

TradeMe listing (http://www.trademe.co.nz/Browse/Listing.aspx?id=154760046)

As I have NZ250 wheels on the AX I don't need them...

Slingshot

12th May 2008, 20:16

zxr250 fuel tank (http://www.trademe.co.nz/Browse/Listing.aspx?id=154476443)

Honda CB125T (http://www.trademe.co.nz/Browse/Listing.aspx?id=154259392)

Skunk

12th May 2008, 20:17

zxr250 fuel tank (http://www.trademe.co.nz/Browse/Listing.aspx?id=154476443)Cheers - I'm bidding.

Honda CB125T (http://www.trademe.co.nz/Browse/Listing.aspx?id=154259392)$1500! WTF? That's a mistake all right...

Slingshot

12th May 2008, 20:41

$1500! WTF? That's a mistake all right...

Seller Comment: 1500 is a mistake offers open <small>2:11 pm, Sat 10 May

Yes
</small>

bungbung

12th May 2008, 20:46

I've got a GL145 rolling chassis. Frame wheels tank brakes. no seat though.

Got a collection of GL145 engine parts too. 4 bottoms and three tops. No pistons or valves

Romeo

13th May 2008, 03:04

COMPLETE NZ250

Christchurch
$450

<img src="http://images.trademe.co.nz/photoserver/94/67429094_full.jpg" alt="NZ250" />

Only fault is it needs new front disc - but there's none available.
Tidy it up, fix the disc, VHT the pipes and onsell it!

http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Motorbikes/Sports/auction-155142881.htm

Slingshot

16th May 2008, 19:56

Ct125 Engine (http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-accessories/Engine-drive-train/auction-155726869.htm)

Honda CB125K3 TWIN Complete Gasket Set (http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-accessories/Engine-drive-train/auction-155533814.htm)

Honda CBR150 (http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Motorbikes/Sports/auction-141033622.htm)

$CENSLS1$

19th May 2008, 11:11

http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Motorbikes/Sports/auction-141033622.htm

Pretty expensive Bucket aint it.. :scooter:

Slingshot

19th May 2008, 11:44

http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Motorbikes/Sports/auction-141033622.htm

Pretty expensive Bucket aint it.. :scooter:

Yip, but not compared to the 9K CBRs that peps have been spouting on about :)

Slingshot

21st May 2008, 22:01

ZXR250 Frame (http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-accessories/Frames-bodywork/auction-155706641.htm)

Wheel, Forks & Brakes (http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-accessories/Frames-bodywork/auction-156140912.htm)

koba

22nd May 2008, 10:27

Good shit!
Keep it coming and keep me dreaming :clap:

quallman1234

22nd May 2008, 17:30

Not bucket legal but she's quite cheap!

http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Motorbikes/Sports/auction-156713950.htm

Slingshot

22nd May 2008, 19:02

Not bucket legal but she's quite cheap!

http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Motorbikes/Sports/auction-156713950.htm

It hasn't reached reserve yet.

quallman1234

22nd May 2008, 19:27

It hasn't reached reserve yet.

Yeah but still! Hehe. Oh shit your right, 2.5k nevermind!

Slingshot

25th May 2008, 13:34

Suzuki GT125 stator coil (http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-accessories/Engine-drive-train/auction-156049172.htm)

Slingshot

25th May 2008, 17:40

CT125 (http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-accessories/Engine-drive-train/auction-157031737.htm)

RG50 motor (http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-accessories/Engine-drive-train/auction-157102776.htm)

Trudes

26th May 2008, 20:39

Can I post up things I need for Rangi in here in hope someone may be able to help me out? I need a Honda RS125 shock if anyone has one they want to sell. Cheers.

xr-rider

27th May 2008, 18:13

there is a CB125 for sale on the ixion website for $800 heres the link http://www.ixion.org.nz/sale.html

gav

28th May 2008, 06:54

Couple of old school Honda 125's here.
http://www.trademe.co.nz/a.asp?id=157638864

http://www.trademe.co.nz/a.asp?id=157639004
That SL125 looks way to tidy to race though!

And a not so old school Honda ....
http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Motorbikes/Sports/auction-157672549.htm

koba

29th May 2008, 13:03

anyone seen this before.
Looks pretty good.....

http://www.bayson.co.nz/product%20list.htm#top

Trudes

29th May 2008, 13:18

Ooooo, good find M.:sunny: For a minute there I thought you were going to buy a chipper and ride that at the next bucket meet!

koba

29th May 2008, 15:09

BUT
I can't find contact details or ordering info.
Am I mising it somewhere..?

bungbung

29th May 2008, 15:34

I had a look, can't find anything in the obvious places. Stuff is cheap though

Skunk

29th May 2008, 15:43

Bayson Trading Limited
7A, 45 The Concourse, Henderson, Waitakere City
(09) 8354888
Source: http://www.finda.co.nz/business/c/importers/4/
They can be emailed from the site...

Slingshot

29th May 2008, 16:45

anyone seen this before.
Looks pretty good.....

http://www.bayson.co.nz/product%20list.htm#top

BUT
I can't find contact details or ordering info.
Am I mising it somewhere..?

A WhoIs search found this email address: bayson.nz@gmail.com

I wonder if they can get 17in rims...looks like they've got everything but.

Mrs K, would one of those shocks suit your application?

Skunk

29th May 2008, 17:56

Mrs K, would one of those shocks suit your application?
Needs a full on remote I believe. I'm going to check with an expert or two if they'll still talk to me.

speedpro

29th May 2008, 18:18

These guys are only about 5 minutes from where I live. I could visit and run a tape measure over a shock or whatever if needed.

Trudes

29th May 2008, 18:26

These guys are only about 5 minutes from where I live. I could visit and run a tape measure over a shock or whatever if needed.

That would be awesome, thanks!! (but only if it's not a hassel :))

Slingshot

29th May 2008, 18:50

These guys are only about 5 minutes from where I live. I could visit and run a tape measure over a shock or whatever if needed.

That's handy to know, if you get a chance you should pop in and let us know what their operation is like.

koba

29th May 2008, 19:06

It has got me thinking about what you could do with all those cheap bits!

Yeah, would be good to know what the place is like...

Slingshot

29th May 2008, 19:34

Honda CBR250 MC19 Rear Wheel (http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-accessories/Frames-bodywork/auction-157580464.htm)

Honda CBR250 MC22 Rear Wheel (http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-accessories/Frames-bodywork/auction-157580462.htm)

I think these are both 17" rims, not sure if they're suitable or not.

Coyote

29th May 2008, 20:06

anyone seen this before.
Looks pretty good.....

http://www.bayson.co.nz/product%20list.htm#top
Oh gosh, that could potentially cost me a lot of money

koba

29th May 2008, 21:18

quallman1234

29th May 2008, 21:27

http://www.trademe.co.nz/Browse/Listing.aspx?id=157645298

AX100, Good starter project, just need shipping.

Skunk

29th May 2008, 21:36

http://www.trademe.co.nz/Browse/Listing.aspx?id=157645298

AX100, Good starter project, just need shipping.
Bad idea I've heard. Only a four speed box. Misses gears when hot too.

koba

29th May 2008, 22:06

GP125 (http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Motorbikes/Classic-vintage/auction-155969557.htm) on tardme

Skunk

29th May 2008, 22:31

Cracker! That's one to start with.

bungbung

30th May 2008, 11:41

I have:

GL145 rolling chassis
TZR250 LH exhaust

Slingshot

30th May 2008, 20:23

NZ250 (http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-accessories/Frames-bodywork/auction-158028293.htm) - $100 no reserve.

Skunk...this is the one with the good wheels right?

Slingshot

30th May 2008, 20:32

NZ250 (http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-accessories/Frames-bodywork/auction-158028293.htm) - $100 no reserve.

Skunk...this is the one with the good wheels right?

Might be something useful in this box of stuff. (http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-accessories/Other/auction-157226522.htm)

Skunk

30th May 2008, 20:40

speedpro

30th May 2008, 20:56

The NZ250 has a nice light front disc as well and it bolts straight onto lots of other little Suzukis including I think RG50s and GT50s. You only need to modify the caliper mount and you've got a very nice front brake.

Slingshot

3rd June 2008, 21:54

HONDA MB50 FRONT END (http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-accessories/Frames-bodywork/auction-158770242.htm)

gav

3rd June 2008, 22:58

HONDA MB50 FRONT END (http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-accessories/Frames-bodywork/auction-158770242.htm)
$110 buy now? Fark, I'd want the complete rolling chassis for that!

How many of you guys have seen this and have it on your watch list? :innocent:
http://www.trademe.co.nz/Browse/Listing.aspx?id=157048559
Looks like at least 3 local Chch Bucketeers have bid on it so far! :)

gav

4th June 2008, 07:16

Honda CB125T
http://www.trademe.co.nz/a.asp?id=158706051

Slingshot

4th June 2008, 13:02

How many of you guys have seen this and have it on your watch list? :innocent:
http://www.trademe.co.nz/Browse/Listing.aspx?id=157048559
Looks like at least 3 local Chch Bucketeers have bid on it so far! :)

Yip, it's on my watchlist :)

Mind you, after adding freight to the cost of it I doubt that it will be in my price range.

Buckets4Me

5th June 2008, 20:58

http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-accessories/Other/auction-158841059.htm

Pumba

6th June 2008, 13:12

http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-accessories/Other/auction-158841059.htm

Interesting, looks like he has wacked a GN front on it

HenryDorsetCase

6th June 2008, 13:31

thats on my watchlist too. that front end looks like a mid 80's GSX 400 front end (the star wheels are a dead giveaway). it looks odd as hell with the front wheel bigger than the back!!

Pumba

6th June 2008, 13:41

mid 80's GSX 400 front end (the star wheels are a dead giveaway)

You would be right. I am sure it would have "interesting" handeling capabilities.

Slingshot

6th June 2008, 20:31

Yip, it's on my watchlist :)

Mind you, after adding freight to the cost of it I doubt that it will be in my price range.

I just brought a ute (http://www.trademe.co.nz/Browse/Listing.aspx?id=156938063) so there's no chance I'm going to be aloud to by this :doh:

Trudes

6th June 2008, 20:33

I just brought a ute (http://www.trademe.co.nz/Browse/Listing.aspx?id=156938063) so there's no chance I'm going to be aloud to by this :doh:

Now That's a cool Kermit!!:niceone:
Edit: Ha! I just went back and read the auction and realised they had called it Kermit already! It really must be its name!!

Slingshot

6th June 2008, 20:40

Now That's a cool Kermit!!:niceone:
Edit: Ha! I just went back and read the auction and realised they had called it Kermit already! It really must be its name!!

That's funny...I'm borrowing some money off my mother in-law to pay for it and she insisted that I call it Kermit too.

It seems that Kermit it it's name. K E R M I T and Kermit was it's nameo.

Skunk

6th June 2008, 20:45

I just brought a ute (http://www.trademe.co.nz/Browse/Listing.aspx?id=156938063) so there's no chance I'm going to be aloud to by this :doh:
Cool colour! 10 points. Kermit stickers for the number plate then...

What am I going to do with an 8 bike trailer now...

Pumba

6th June 2008, 20:45

FXR (http://www.trademe.co.nz/Browse/Listing.aspx?id=159002504)

Well its still cheaper than a CBR150:crazy:

Slingshot

6th June 2008, 21:31

Cool colour! 10 points. Kermit stickers for the number plate then...

What am I going to do with an 8 bike trailer now...

You can take Kermit away from the track when I can't get it started :)

gav

6th June 2008, 21:56

How about Kermit Kingcab!?
http://www.trademe.co.nz/Trade-Me-Motors/Cars/Nissan/auction-158826035.htm

Citroenjunkie

7th June 2008, 15:43

http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Motorbikes/Dirt-bikes/auction-158527818.htm

Or a Suzuki 125

http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Motorbikes/Dirt-bikes/auction-159342989.htm

Slingshot

17th June 2008, 19:01

Motor cycle carbs and stators (http://www.trademe.co.nz/Browse/Listing.aspx?id=160997403)

Seller thinks the stators are off a GP100.

Skunk

17th June 2008, 21:43

One of those stators is missing the stator... only has the lighting coil.

Trudes

17th June 2008, 21:47

Skunk = observant!!! Who said you were blind?

Skunk

17th June 2008, 21:49

Sorry, can't read what you posted... Oh, look Mrs K... two flat slide carbs.

Trudes

17th June 2008, 21:58

What? Where? Do I need one of those oh wise one?

Skunk

17th June 2008, 22:09

What? Where? Do I need one of those oh wise one?
Who are you asking? When the wise one answers I guess I'll know who to direct my questions to.

Motor cycle carbs and stators (http://www.trademe.co.nz/Browse/Listing.aspx?id=160997403)Two flat slide carbs. One looks like it'll do you on the MB100 motor I think. The wise one might be able to inform us better.

Trudes

17th June 2008, 22:12

Come in Wise One!!
I don't wanna spend $40 on a pile of crap that may or may not be what I need, so hopefully the wise one will be able to tell me shortly eh.

speedpro

18th June 2008, 16:57

I have one of those flat slides the same as the one which is still all there (maybe?). It's a semi-downdraught 28mm and would be perfect for a pretty good MB100 engine. $40 would be a good price and the rest goes in the bin.

Trudes

18th June 2008, 18:59

Slingshot

18th June 2008, 19:13

So I should bid ya think? Thank you Wise One!! (And Slingshot and Skunk.... where would I be without you guys? No wait, don't answer that!) Arr crap, just read "buyer must pick up", anyone in ChCh wanna help me out here?

Yeah, you should.

The two smaller carbs look the same as mine so when you win you could give them to me <_<

Trudes

18th June 2008, 19:14

Yeah, you should.

The two smaller carbs look the same as mine so when you win you could give them to me <_<

No worries. Know anyone in Chch who'd go pick em up for us?

Buddha#81

18th June 2008, 19:19

nah fark ya..........yeah ok:niceone:

Trudes

18th June 2008, 19:25

nah fark ya..........yeah ok:niceone:

hehe, I like you!!!
I've just sent a PM to Speedygirl to see if she could grab them for me as she's probably heading this way soon, but if she can't I would really appreciate your very *cough* kind offer thanks!!:2thumbsup

speedpro

18th June 2008, 19:48

Just doublechecked the ad. The complete carb is the sidedraught one. Still no worries as it's a good carb as well and I think the bits from that will swap to the other.

Skunk

18th June 2008, 20:46

I'll see if the sidedraught fits the TF. If it does I'll take it.

speedpro

18th June 2008, 21:00

It'll fit. You need to make a flange with a tube sticking out which is the same OD and ID as the carb. The flange bolts up to the TF barrel and you put a bit of radiator hose over the tube and fit the carb in the other end. Couple of hoseclips and she's all good. I think I have a couple of those flange things round here somewhere. The radiator hose piece is only long enough to fit over the tube and the carb. The carb and the tube should be real close together but not touching for good airflow,

Slingshot

18th June 2008, 21:29

honda xl xr 100 (http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-accessories/Engine-drive-train/photos/a-160551972/p-69730576.htm)

CB100 Motor (http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-accessories/Engine-drive-train/auction-160706057.htm)

honda 125 cc motor (http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-accessories/Engine-drive-train/auction-160741034.htm)

rear shock yamaha warrior (http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-accessories/Suspension/auction-161268147.htm)

gav

19th June 2008, 06:43

Speaking of carbs, anyone run a carb off a two stroke on a four stroke? Any problems?

Buddha#81

19th June 2008, 07:25

Speaking of carbs, anyone run a carb off a two stroke on a four stroke? Any problems?

The carb you want to use is off a two smoker of double the size, a two smoker has double the induction cycles........Emultion tube, needle, both jets......get a 250 4 smoke carb, it will be less grief.

speedpro

19th June 2008, 15:48

Speaking of carbs, anyone run a carb off a two stroke on a four stroke? Any problems?

I've done it. Due to the different intake pulses you will have to make changes. Size wise, just get one you think will be about right. Then the change to make is where air goes into the carb there will be a hole which supplies air to the emulsion tube. Cut a thread in that and put in something like a 110 main jet (small round slotted type fit nicely). You then make all the usual changes to get the jetting right. You "may" have to change the 110 jet but it will be a good place to start. I put some 26mm mikuni carbs from a RD250 onto a Honda 200 twin. Worked a treat.

Slingshot

27th June 2008, 21:48

Honda MB100 Piston + Rings (http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-accessories/Engine-drive-train/auction-162509405.htm)

ajturbo

27th June 2008, 21:58

Honda MB100 Piston + Rings (http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-accessories/Engine-drive-train/auction-162509405.htm)
can i fit them in lukes bucket??

Slingshot

27th June 2008, 23:22

can i fit them in lukes bucket??

If you want to, my be a challenge though.

speedpro

28th June 2008, 16:12

can i fit them in lukes bucket??

I've used the TKRJ brand and found them to be very good. The last one did end up in lots of pieces but . . . . . .

The one listed looks to have blow by, going by the discolouring of the piston and going by the general grubby nature of the piston I would steer clear.

I've been keeping track of piston dimensions of the ones I've used. If you give me the dimensions of what you have I will see if anything compares, sort of.

gav

28th June 2008, 18:24

Reading that ad he has fitted an oversize TKRG piston and has for sale the standard piston that he has taken out. I don't think its a TKRG piston kit that is for sale?

ajturbo

29th June 2008, 08:02

I've used the TKRJ brand and found them to be very good. The last one did end up in lots of pieces but . . . . . .

The one listed looks to have blow by, going by the discolouring of the piston and going by the general grubby nature of the piston I would steer clear.

I've been keeping track of piston dimensions of the ones I've used. If you give me the dimensions of what you have I will see if anything compares, sort of.
got to get it out of the engine first...
can take the head off, but the cylinder... it not move!!!.. think the welding worked

also luke's is a 50cc.......

Buckets4Me

14th July 2008, 21:30

http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Motorbikes/Sports/auction-165491687.htm

piston broke

14th July 2008, 21:46

what is a bucket?

sinfull

14th July 2008, 22:19

what is a bucket?

Find a bucket of shit cut it to shreads set it up how you want it (or buy one set up) for the track and follow a few rules (http://www.kiwibiker.co.nz/forums/showthread.php?t=65893&highlight=bucket+rules)

Pumba

28th July 2008, 13:02

Some FXR parts (http://www.trademe.co.nz/Browse/Listing.aspx?id=167164839)

RS125 forks with a RG50 wheel (http://www.trademe.co.nz/Browse/Listing.aspx?id=168013062)

Brand new (15 years old) RG50 Slick (http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-accessories/Wheels-tyres-brakes/auction-168156966.htm)

RG50 Wet Slick (http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-accessories/Wheels-tyres-brakes/auction-168157532.htm)

quallman1234

31st July 2008, 21:11

Fxr / RG150 parts from this guy decent price. Check out his auctions

http://www.trademe.co.nz/Members/Listings.aspx?member=499838

Skunk

31st July 2008, 21:22

Fxr / RG150 parts from this guy decent price. Check out his auctions

http://www.trademe.co.nz/Members/Listings.aspx?member=499838
Meh. I can't buy from him as I got blacklisted for asking if I could see the part in question. Can't buy from bryce5 either - he blacklisted me at the same time. They must be buddies in Buckets and Bits.

wickle

31st July 2008, 21:42

Meh. I can't buy from him as I got blacklisted for asking if I could see the part in question. Can't buy from bryce5 either - he blacklisted me at the same time. They must be buddies in Buckets and Bits.
One and the same I think also trades under another couple of names also!

quallman1234

31st July 2008, 22:31

Yeah, i haven't heard the best of things about bucket n bits, but i did buy a barrel and head off him for 35 bucks and had no problems.

Kendog

31st July 2008, 22:51

Yeah, i haven't heard the best of things about bucket n bits, but i did buy a barrel and head off him for 35 bucks and had no problems.

I just bought a shock off them from TM. There service was simply outstanding, best trade I have had.

gav

31st July 2008, 23:30

Nah, they're OK, Bryce is good, but not sure if Buckets and Bits has been sold. but there's another guy, Max, who seems pretty abrupt, man of few words!

Slingshot

15th August 2008, 19:31

A couple of really shitty looking 50cc bikes (http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-accessories/Frames-bodywork/auction-171251591.htm).

Might be good for some motor bits maybe?

Slingshot

15th August 2008, 19:41

Piss off with the TS125 - I'm watching that one!

What TS125?

Skunk

15th August 2008, 19:51

Piss off with the TS125 - I'm watching that one!

Slingshot

17th August 2008, 09:22

HONDA MB50 TANK/SEAT (http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-accessories/Frames-bodywork/auction-171408411.htm)

gav

18th August 2008, 19:36

Hope you Welly mob are keeping an eye on this?
http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-accessories/Frames-bodywork/auction-171522201.htm

Skunk

18th August 2008, 19:42

Hope you Welly mob are keeping an eye on this?
http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-accessories/Frames-bodywork/auction-171522201.htm
I am now! Cheers Gav.

Trudes

18th August 2008, 20:06

I am now! Cheers Gav.
..........................

Slingshot

18th August 2008, 20:09

Hope you Welly mob are keeping an eye on this?
http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-accessories/Frames-bodywork/auction-171522201.htm

I am now! Cheers Gav.

Yes...that's my $10 bid on there...get ya grubby mitts off!!!

Pumba

18th August 2008, 21:01

Someone else bid on these please (http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-accessories/Wheels-tyres-brakes/auction-171784794.htm) :sweatdrop, I dont need them but if the price doesnt go up I may be forced to add them to my collection of parts in the shed :brick:

Skunk

18th August 2008, 21:24

Slingshot

18th August 2008, 21:45

Skunk

18th August 2008, 21:46

Yes...that's my $10 bid on there...get ya grubby mitts off!!!
OK. This time... Buy those 1kt wheels as well - I think you'll be wanting something wider than is on there.

Slingshot

18th August 2008, 21:53

OK. This time... Buy those 1kt wheels as well - I think you'll be wanting something wider than is on there.

I have got some wheel already...but you can never have to many wheels right.

Skunk

18th August 2008, 22:00

Depends if you're doing a clear-out in my direction or not.

Slingshot

19th August 2008, 08:02

Stop bidding on my wheels you bastards (Gav & JSD)

nudemetalz

19th August 2008, 08:13

Those would be too wide for Frankie wouldn't they, Slingy ?

Slingshot

19th August 2008, 10:50

Those would be too wide for Frankie wouldn't they, Slingy ?

Yip, they would be.

But I'm looking to the future here, I've decided it's time to upgrade but the cost will be the factor.

Skunk

19th August 2008, 10:55

Stop bidding on my wheels you bastards (Gav & JSD)
Gav and Dangerous eh... Bloody Southerners.

bungbung

19th August 2008, 11:04

Does anyone have a 1kt rear wheel they want rid of?

boostin

19th August 2008, 11:32

Ok, if I have to :)

If I get stuck with freight could you pick them up for me until I can get something sorted?
Everyone please stop bidding on these, I have had my eye on them since listed and am willing to go up to $1,000,000 if need be...so stop bidding now! :bleh:

nudemetalz

19th August 2008, 12:51

Does anyone have a 1kt rear wheel they want rid of?

Yes I have,...minus the rear disc though unfort.

Skunk

19th August 2008, 13:03

Everyone please stop bidding on these, I have had my eye on them since listed and am willing to go up to $1,000,000 if need be...so stop bidding now! :bleh:
I've got a set you can have for that. Or even half that. Bargain!

Pumba

19th August 2008, 16:56

Ok, if I have to :)

If I get stuck with freight could you pick them up for me until I can get something sorted?

Not a problem

gav

19th August 2008, 18:30

Everyone please stop bidding on these, I have had my eye on them since listed and am willing to go up to $1,000,000 if need be...so stop bidding now! :bleh:
Autobid mate, that'll scare them off, hang on that's me!

Slingshot

19th August 2008, 20:00

I wonder what this would be like.....Derbi GPR (http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Motorbikes/Sports/auction-171604531.htm)

Pumba

19th August 2008, 20:24

I wonder what this would be like.....Derbi GPR (http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Motorbikes/Sports/auction-171604531.htm)

Have that on my watchlist and was woundering a simular thing

Slingshot

19th August 2008, 21:37

Suzuki A100 Gasket Set (http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-accessories/Frames-bodywork/auction-171987609.htm)

Skunk

19th August 2008, 23:08

I wonder what this would be like.....Derbi GPR (http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Motorbikes/Sports/auction-171604531.htm)
I have a catalogue of their bikes. Their 125's would be so cool. Bucket legal too. I can't read Italian though.

koba

19th August 2008, 23:16

Suzuki A100 Gasket Set (http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-accessories/Frames-bodywork/auction-171987609.htm)

just got me one of them...

Slingshot

24th August 2008, 21:22

MB100 Bucket (http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-accessories/Frames-bodywork/auction-172529826.htm)

Buckets4Me

25th August 2008, 08:57

http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-accessories/Frames-bodywork/auction-172529826.htm

:bleh:

some one get this going again will ya

Buckets4Me

25th August 2008, 08:57

looks like a good start for one of you wellington guys or gals

boostin

25th August 2008, 09:03

also this might be an option for those less mechanically inclined.

http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Motorbikes/Sports/auction-172690831.htm

Buckets4Me

25th August 2008, 09:13

http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Motorbikes/Sports/auction-171663404.htm bike in auckland I could posibly bring it down to taupo at chrismass or tamranui on a race day ???

http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-accessories/Frames-bodywork/auction-172633224.htm

Skunk

25th August 2008, 10:08

http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-accessories/Frames-bodywork/auction-172633224.htm
One of the NWM is wanting that one...

Skunk

25th August 2008, 10:11

http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-accessories/Frames-bodywork/auction-172529826.htm

:bleh:

some one get this going again will ya
If only I could bid. Blacklisted years ago for asking 'clearance' a question.

koba

25th August 2008, 10:26

The MB is tempting....

koba

25th August 2008, 10:29

If only I could bid. Blacklisted years ago for asking 'clearance' a question.

Im guessing you weren't asking if you could eat his babies...?

Skunk

25th August 2008, 10:53

Im guessing you weren't asking if you could eat his babies...?
No, I asked if I could see it. No reply, just a blacklisting.

Slingshot

25th August 2008, 14:53

One of the NWM is wanting that one...

One of the Norf Welly Massif now has that frame!

<IMG src="http://www.kiwibiker.co.nz/forums/albums/thumbs/7/a539df0f5e66f12ef1920fd9089d171a_7320.jpg?dl=12196 21060"></img> (http://www.kiwibiker.co.nz/forums/picture.php?albumid=80&pictureid=7320)

And there is a thread for this Trade Me stuff you know, it lives here. (http://www.kiwibiker.co.nz/forums/showthread.php?t=73540)

koba

25th August 2008, 15:29

MB100 Bucket (http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-accessories/Frames-bodywork/auction-172529826.htm)

If I got this for the engine would anyone want other bits off it?

koba

25th August 2008, 15:33

I need to clear out some room so the VT250 supermono crazy idea is going bye bye.

In have one COMPLETE '86 VT250 that I got for a packet of biscuits.

Does anyone wan't any bits off it?

I am going to rob what I want off it this week, anyone is free to come and have a nosey and rip off what they want.
After that it is going in a skip or off a cliff or somthing.

PM me if you want to have a gander.

Str8 Jacket

25th August 2008, 15:36

The MB is tempting....

*Ahem* You have just bought an A100, remember?!..... :chase:

Skunk

25th August 2008, 15:41

If I got this for the engine would anyone want other bits off it?
I'd take the caliper. Maybe the forks.

F5 Dave

25th August 2008, 16:19

VT for a packet of Biscuits? What kind of biscuits? If they were chocolate I think you got the raw end of the deal.

The Derbi would be choice, there are 3 or so in Auckland. 125 would be w/c so not legal unless sleeved to 100.

Buckets4Me

25th August 2008, 17:44

and if you start a new thread people see it lol
I know I know

Dont shoot me I'm from Auckland

all4A50s

25th August 2008, 18:24

I am looking for parts to return a RG50 to the road; CDI/coil & exhaust washer is the main things I am lacking but will take any parts people don't want.

koba

25th August 2008, 20:23

F5 Dave

26th August 2008, 09:14

oohh I haven't had Toffee Pops for ages. I'll have another hunt around under the house, there must be a VT in there somewhere.

RG CDIs aren't that easy to find, they do go, if you have a going one on your racebike swap it over & get a decent ign for it. All I have now is a stator plate with the lighting coils, maybe an ignition switch.

Slingshot

26th August 2008, 18:47

Brake Caliper (http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-accessories/Frames-bodywork/auction-173192725.htm)

Ivan

26th August 2008, 18:53

I want a rolling frame so I can get onto doing something here

Kendog

26th August 2008, 19:08

I want a rolling frame so I can get onto doing something here

I have a spare MB100 rolling frame.

Trudes

26th August 2008, 19:19

I have a spare MB100 rolling frame.

:lol: :lol: The blue poo!! Blue pooooooooo!!!! Beware the blue poooooooo!!!!

Trudes

26th August 2008, 19:30

Brake Caliper (http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-accessories/Frames-bodywork/auction-173192725.htm)

<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/WXRgpum7OUo&hl=en&fs=1"></param><param name="allowFullScreen" value="true"></param><embed src="http://www.youtube.com/v/WXRgpum7OUo&hl=en&fs=1" type="application/x-shockwave-flash" allowfullscreen="true" width="425" height="344"></embed></object>
Mine?????

Slingshot

26th August 2008, 20:02

Yip...that was weird.

Trudes

26th August 2008, 20:23

Yip...that was weird.

Quick, edit the vid link out of your post before someone infracts your arse!!

Slingshot

26th August 2008, 21:16

Quick, edit the vid link out of your post before someone infracts your arse!!

What vid link?:Police:

Trudes

26th August 2008, 21:20

Good work!! Oh I mean, eh, what are you on about?;)

Skunk

26th August 2008, 22:13

MINE!

Ok T Rudes, you can have it to replace Pammys if you like...

Slingshot

26th August 2008, 23:05

Here's a tip, Motomart have a box of old braided brake lines...in it there are a couple of calipers. They might sell one to you if you ask nicely, they might not too.

F5 Dave

27th August 2008, 09:22

I want a rolling frame so I can get onto doing something here

Ivan, you need a complete going bike so it has 1/2 a chance of making it to the races.:scooter:

rwh

31st August 2008, 10:53

In have one COMPLETE '86 VT250 that I got for a packet of biscuits.

Does anyone wan't any bits off it?

I'm crazy even asking this ... do you still have it, and does the engine go? I think from previous discussions, the answer is probably no, which would be a relief.

Otherwise - I have another 2 (1 complete with dead/dying motor, 1 not) in a similar situation, if anyone's interested.

Richard

koba

1st September 2008, 10:34

I'm crazy even asking this ... do you still have it, and does the engine go? I think from previous discussions, the answer is probably no, which would be a relief.

Otherwise - I have another 2 (1 complete with dead/dying motor, 1 not) in a similar situation, if anyone's interested.

Richard

Yeah, It WAS running, with that nasty knock.
I havn't got it running again but have only devoted about 10 minutes to it.

I was liking the "Supermono" Bucket idea for a while because VTs are so commonly discarded it would end up being an engine for the price of the big ends and other broken bits. I would think that it COULD be made very fast because it could spin like a mofo but it also requires a heluva lot of time, somthing that I am finding less and less of spare...

speedpro

1st September 2008, 12:20

I have this stuff in my garage and the likelihood of me ever using it is practically 0, so out it goes. Actually the likelihood of anyone wanting some of it is 0 as well but you never know.

Genuine Honda MB100 .25 over piston. Never used but prepped ready for use. It doesn't have it's tarnish preventing bag/wrap so the skirts are tarnished but it isn't anything you can feel. I also have a new single ring to fit this piston.

I also have a single ring for a MB100 .5 over. and a single TKRJ MB100 .75 over ring. These could be useful if someone just wants to freshen things up a bit.

This might be less useful but I have a stock MB100 piston with hardly any use. The top ring pin has fallen back allowing the ring to rotate which damaged the barrell but did no harm to the piston itself. A new pin could be pressed into the top groove over the 2nd groove pin.

MB100 .25 over piston and rings. At least I think it's a MB piston. It looks to be OK but has had a some use, not a lot, and has no damage(that matters). Could be a good spare.

The last piston is a Suzuki probably TS100 piston. I think it was one I played with. I taken a bit off the bottom of the skirt and relieved the bottom where it masks the transfer ports at BDC. It's 50mm and was only used for experimenting with intake port timing so has very little use.

I have what I have labelled TF100 rings. part # 12140-28630. They are brand new, the packet has not been opened. There's also a unopened packety of 1st(?) oversize TF100 rings part #12140-28630-050.

The last ring is probably a Suzuki RG400 ring part # 12140-20A12-000. Could be useful if you want to convert to RG pistons. These rings used to be really expensive. Especially if you were fitting new ring and piston after every 2nd meeting.

couple of other bits that might be useful are a 2mm spacer for putting inder a MB100 barrell and what is I think a carb adaptor for a TS100 barrell with a 32mm hole. This adaptor would be ideal for a hot TS100 to fit a 32mm carb.

Some of this stuff might be junk to most people but gold to others. I don't want much for any of this. Few beers, couple of $, drugs, you name it. I'm in clean out mode in the garage.

F5 Dave

1st September 2008, 12:25

suzi go up in 0.5 steps, so yes they are 1st over.

Pumba

3rd September 2008, 20:18

Slick 1 (http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-accessories/Wheels-tyres-brakes/auction-174275008.htm)

Slick 2 (http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-accessories/Wheels-tyres-brakes/auction-174275411.htm)

Slick 3 (http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-accessories/Wheels-tyres-brakes/auction-174276261.htm)

Slick 4 (http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-accessories/Wheels-tyres-brakes/auction-174334311.htm)

Slick 5 (http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-accessories/Wheels-tyres-brakes/auction-174335468.htm)

Slick 6 (http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-accessories/Wheels-tyres-brakes/auction-174336404.htm)

Slick 7 (http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-accessories/Wheels-tyres-brakes/auction-174337563.htm)

Slick 8 (http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-accessories/Wheels-tyres-brakes/auction-174338665.htm)

Slick 9 (http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-accessories/Wheels-tyres-brakes/auction-174341520.htm)

Slick 10 (http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-accessories/Wheels-tyres-brakes/auction-174342329.htm)

Slick 11 (http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-accessories/Wheels-tyres-brakes/auction-174343221.htm)

Suzuki FXR 150 1997 complete bike for wrecking (http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-accessories/Engine-drive-train/auction-174619175.htm)

Some Leathers (http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-accessories/Frames-bodywork/auction-174517445.htm)

TZ350

3rd September 2008, 21:54

http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-accessories/Wheels-tyres-brakes/auction-174699506.htm

Slingshot

4th September 2008, 20:21

Yamaha 100cc Twin (http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-accessories/Engine-drive-train/auction-174135099.htm)

Suzuki TF125 (http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-accessories/Engine-drive-train/auction-174665362.htm)

quallman1234

4th September 2008, 22:26

Skunk

5th September 2008, 08:45

Very cool twin!
Mitts off - mine if it's cheap enough!

bungbung

5th September 2008, 11:11

http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Motorbikes/Classic-vintage/auction-174274683.htm

bungbung

5th September 2008, 11:14

I have one, front end probably most useful part of it.

Slingshot

6th September 2008, 12:30

GSXR 250 1988 front brake set up (http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-accessories/Wheels-tyres-brakes/auction-175057701.htm)

(http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-accessories/Wheels-tyres-brakes/auction-175057701.htm)

Slingshot

7th September 2008, 20:40

[/URL]

[URL="http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-accessories/Wheels-tyres-brakes/auction-174276261.htm"]Slick 3 (http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-accessories/Wheels-tyres-brakes/auction-174275008.htm)

That one is described as a Yokohama 110/585-17. In normal speak...what width and profile is that?

_STAIN_

7th September 2008, 21:02

think this will mean 58.5% = profile.

Pumba

8th September 2008, 08:11

Rg250 rolling chassis (http://www.trademe.co.nz/a.aspx?id=175182114)

Slingshot

8th September 2008, 09:12

That one is described as a Yokohama 110/585-17. In normal speak...what width and profile is that?
<table border="0"><tbody><tr><td><small>
$10.00 </small></td><td><small> 7 Sep</small></td><td><small> 10:21 pm</small></td><td align="left"> <small>zxrgav (http://www.trademe.co.nz/Members/Listings.aspx?member=248001) (143 (http://www.trademe.co.nz/Track.aspx?site=TRADEME%2C%2Clink%2D%2Dfeedback%5F number&redirect=%2FMembers%2FFeedback%2Easpx%3Fmember%3D2 48001) http://www.trademe.co.nz/images/star100.gif (http://www.trademe.co.nz/Track.aspx?site=TRADEME%2C%2Clink%2D%2Dfeedback%5F stars&redirect=%2FMembers%2FFeedback%2Easpx%3Fmember%3D2 48001))
</small></td></tr></tbody></table>
I wanted that one.

speedpro

8th September 2008, 10:53

think this will mean 58.5% = profile.

This a very good example of those that don't know what they are talking about telling someone something.

Slingshot

8th September 2008, 11:36

This a very good example of those that don't know what they are talking about telling someone something.

Care to elaborate?

speedpro

8th September 2008, 12:16

585 is the outside diameter in millimetres of the tyre when fitted to the correct rim. It's another way of indicating the aspect ratio but makes it easier when switching tyres to determine any gearing changes that may be needed due to differing tyre dimensions.

Slingshot

8th September 2008, 14:25

quallman1234

8th September 2008, 16:57

<table border="0"><tbody><tr><td><small>[B]
</small></td></tr></tbody></table>
I wanted that one.

Bid then....

Slingshot

8th September 2008, 17:15

Bid then....

I'm gonna.

speedpro

8th September 2008, 17:43

Nice one, thanks.

I've just scored a 2.5" x 17" rim, would this slick fit do you think?

I'm not too sure. I used to fit them to really skinny RG50 rims but did used to have chicken strips so they probably needed wider rims. 2.5" "might" be a bit wide as they are old school slicks which generally were meant for fitment to narrower rims than the same size tyre nowadays. Probably 2.15" would be a good size rim for this tyre. I see it's an ultra soft so even if it is 20 years old it'll stick to anything .

I'm not sure though, about the size rims.

gav

8th September 2008, 22:22

Think an FXR rim is 2.15?

Any way if that RG250 rolling chassis is a bit too scruffy for ya, there is always this! :eek5:
http://www.trademe.co.nz/a.aspx?id=175272982

Pumba

9th September 2008, 07:53

Think an FXR rim is 2.15?

Any way if that RG250 rolling chassis is a bit too scruffy for ya, there is always this! :eek5:
http://www.trademe.co.nz/a.aspx?id=175272982

Ohhhh, now that is pretty. I wounder how my RX125 engine would go in that frame? (runs off to check bank balance and reality slaps him over the face with a wet fish:laugh:)

Pumba

16th September 2008, 08:03

So who wants to start reviving a lost class of buckets:whistle:

Bucket Sidecar (http://www.trademe.co.nz/a.aspx?id=176679267)

Bucket Bike and Sidecar (http://www.trademe.co.nz/a.aspx?id=176675111)

Slingshot

16th September 2008, 22:59

Honda GL145 (http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Motorbikes/Other/auction-176639767.htm)

Squiggles

19th September 2008, 23:00

So who wants to start reviving a lost class of buckets:whistle:

Bucket Sidecar (http://www.trademe.co.nz/a.aspx?id=176679267)

Bucket Bike and Sidecar (http://www.trademe.co.nz/a.aspx?id=176675111)

mines </10chars>

Slingshot

19th September 2008, 23:59

mines 

Nice one!!

If you ever take the GP100 apart, could you take a photo of the rotary disk valve? I'm keen to see what he's done to modify it.

Pumba

21st September 2008, 19:40

mines </10chars>

Nice one, will these at some stage grace the track again, or do you have other plans?

stanko

21st September 2008, 19:40

I have some FXR bits Fuel Tank, swingarm, rear shock, maybe some other stuff. PM me if you are interested

Pumba

25th September 2008, 12:18

TZR250 1KT? (http://www.trademe.co.nz/Browse/Listing.aspx?id=178422445) dunno frame might be usefull once you dump the engine

racer40

27th September 2008, 12:26

hi Pumba, great if we could revive the sidecars again. there are alot of old chassis around, but maybe it should be looked at reverting to the normal bike with sidecar welded on as they were when bucket sidecars first started, before people went for smaller wheels, and lots of engineering on them, which made it more expensive, whatever way i am keen on getting one as it will be easier on my leg than a solo

speedpro

27th September 2008, 18:35

Those original old bucket sidecars were a real problem. The later ones like those built in Palmerston north, by a guy who's name escapes me, were based on an original motorcycle frame but were modified to work with say 10" or 12" car style wheels. They weren't too costly and you got rid of all the problems caused by the original front forks and original motorcycle wheels. They were still pretty horrible compared to our sidecar which still only cost us $1000 or less including the big trailer it came on.

gav

30th September 2008, 18:07

Another cheap GL145 in the Welly area, why hasnt someone snapped this one up?
http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Motorbikes/Other/auction-179515670.htm

Trudes

1st October 2008, 07:27

We're all too broke, how about a loan ;)

Buckets4Me

1st October 2008, 08:48

http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Motorbikes/Other/auction-178856242.htm

Slingshot

1st October 2008, 15:01

Pumba

1st October 2008, 20:19

Suzuki FXR150 (http://turners.co.nz/TabId/188/vguid/CBCD6BA7-4CD3-465A-9FF8-8390B74B28DF/default.aspx) in the Turners Damaged Vehicles auction in Auckland tomorrow!

Looks like it's a runner and just has a bit of damage down one side.

I'd be keen to know what it sells for, can't get into the Live Auction thing from work so I won't be able to watch the auction.

Its generally the way to buy them, the ones on trade me can sell for stupid money for what they are. I know two guys now that have brought only slight damaged runners one weekend, striped the fairings and been at the track the next for $800 - $900 total cost spent.

Makes the money I have spent on mine look stupid:weep:

Kendog

1st October 2008, 20:27

Its generally the way to buy them, the ones on trade me can sell for stupid money for what they are. I know two guys now that have brought only slight damaged runners one weekend, striped the fairings and been at the track the next for $800 - $900 total cost spent.

Makes the money I have spent on mine look stupid:weep:

Where's the fun in that?

Pumba

1st October 2008, 20:34

Where's the fun in that?

Fair point:clap:

Buckets4Me

3rd October 2008, 14:09

http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Motorbikes/Classic-vintage/auction-179891938.htm

http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Motorbikes/Other/auction-178856242.htm

Buckets4Me

3rd October 2008, 14:10

or fxr engine
http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-accessories/Engine-drive-train/auction-180109559.htm

Buckets4Me

3rd October 2008, 14:11

compleat fxr
http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Motorbikes/Sports/auction-179334108.htm

ride till you want to race

Buckets4Me

3rd October 2008, 14:16

or for the cb125t
http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-accessories/Engine-drive-train/auction-179442405.htm

vital I hear

Buckets4Me

3rd October 2008, 14:21

cb100 motor
http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-accessories/Engine-drive-train/auction-178974659.htm

Slingshot

3rd October 2008, 16:56

or for the cb125t
http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-accessories/Engine-drive-train/auction-179442405.htm

vital I hear
From what I gather, these won't fit the CB125t.

nudemetalz

3rd October 2008, 17:18

yup because they're for the 100/125 singles.

Slingshot

6th October 2008, 19:56

Bucket Project Chassis (http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-accessories/Frames-bodywork/auction-180840215.htm)

<IMG src="http://images.trademe.co.nz/photoserver/tq/59/76364959.jpg"></IMG> (http://images.trademe.co.nz/photoserver/59/76364959_full.jpg)

Buckets4Me

8th October 2008, 20:19

gl145 engine

http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-accessories/Engine-drive-train/auction-180585937.htm

Slingshot

8th October 2008, 21:21

gl145 engine

http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-accessories/Engine-drive-train/auction-180585937.htm

Mmmm....I wonder who's selling that <_<

Skunk

8th October 2008, 21:46

Mmmm....I wonder who's selling that <_<
The freak is letting it go cheap...

Slingshot

9th October 2008, 06:48

The freak is letting it go cheap...

I need the space, and to be fair....it's not running.

Buckets4Me

10th October 2008, 07:37

http://www.trademe.co.nz/Browse/Listing.aspx?id=181593387

$1 fxr blowen engine

ran without oil now in bits

:nono:

Slingshot

14th October 2008, 18:42

FZR250 Swingarm (http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-accessories/Frames-bodywork/auction-182424358.htm)
<img src="http://images.trademe.co.nz/photoserver/6/78281906_full.jpg"></img>

NSR250 Swingarm (http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-accessories/Frames-bodywork/auction-182426600.htm)
<img src="http://images.trademe.co.nz/photoserver/54/78283054_full.jpg"></img>

Skunk

14th October 2008, 22:47

Shelracing has been in and got that FZR swingarm already!

Pumba

15th October 2008, 20:54

Shelracing has been in and got that FZR swingarm already!

And for that money why wouldnt you:laugh:

Set of GP125 Wets (http://www.trademe.co.nz/Browse/Listing.aspx?id=182182487)

SHELRACING

18th October 2008, 19:36

10 bucks I just had to have it.

Trouble wiv you southern boys you asleep half the time....

Wobblers next project bike.

SHELRACING

19th October 2008, 21:15

Honda CB125 twin motor... Finishes soon

http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-accessories/Engine-drive-train/auction-182261244.htm

SHELRACING

21st October 2008, 21:01

Thes look interesting. Brand new Suzuki AX100 copies.

Anybody got one ????

http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-accessories/Engine-drive-train/auction-182841926.htm

Slingshot

22nd October 2008, 10:55

Thes look interesting. Brand new Suzuki AX100 copies.

Anybody got one ????

http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-accessories/Engine-drive-train/auction-182841926.htm

Why would you want one?

4 speed, auto clutch gearbox

quallman1234

22nd October 2008, 23:16

Why would you want one?

4 speed, auto clutch gearbox

You can get a 150cc 4 stroke for that price.

SHELRACING

23rd October 2008, 09:12

Why would you want one?

4 speed, auto clutch gearbox

Oops, didn't read the auto clutch bit, useless then !!!!

Skunk

23rd October 2008, 12:48

My AX has got a clutch, but sometimes has an autogearbox.

F5 Dave

23rd October 2008, 16:50

Well I don't usually do this, but this has got to be a barge-in

http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Motorbikes/Scooters/auction-184008004.htm

Ok it has seat for black model & no carry rack & the most dodgy tyres available, & it is a colour we never got so not sure if full power version.

But what a price!:gob:

quallman1234

28th October 2008, 17:35

All under 200$

B120 Engine Complete
http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-accessories/Engine-drive-train/auction-183841573.htm

TF125 Complete?
http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-accessories/Engine-drive-train/auction-184302442.htm

DT100
http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-accessories/Engine-drive-train/auction-184056083.htm\

AX100 Whole bike
http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-accessories/Engine-drive-train/auction-184723663.htm

Trudes

28th October 2008, 18:13

I wonder if the guy with the AX would consider selling the right hand side cover and tail section separately? :lol:

Skunk

28th October 2008, 20:51

Buy the whole thing for those bits then talk someone gullible into buying the rest. That's what I would do. :yes:

Trudes

28th October 2008, 21:30

Buy the whole thing for those bits then talk someone gullible into buying the rest. That's what I would do. :yes:

Nah, can't be arsed, I'd end up with yet another bucket frame in my garage, how many do I need?:msn-wink:

nudemetalz

28th October 2008, 21:36

Kendog

28th October 2008, 21:38

Nah, can't be arsed, I'd end up with yet another bucket frame in my garage, how many do I need?:msn-wink:

I think there may have been a subtle reference to the side cover Skunk purchased.

Trudes

29th October 2008, 05:58

I think there may have been a subtle reference to the side cover Skunk purchased.

Drrrrr :whistle:

F5 Dave

29th October 2008, 08:14

What a ridiculous price you mean ????

Well the 'buy now' is way more than they were new. And it's only 23 yrs old! I see someone has ribbed him about the price already, pity the grammar was lax. He's trading on people not knowing what it's worth & petrol hysteria. Next plonker- "can I pay it off?" Haha tardeme has some titheads on it yeah?

SHELRACING

29th October 2008, 18:56

I've just listed an FZR250 CDI unit on Tardme. They are getting a bit scarce now. If you want to convert your CB125twin to a total loss You'll need one. I've used it myself and guarantee it's working

http://www.trademe.co.nz/Browse/Listing.aspx?id=185112032&ed=true

Cheers
Steve

quallman1234

30th October 2008, 01:26

AX100 Engine.

http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-accessories/Engine-drive-train/auction-184221615.htm

timg

30th October 2008, 21:23

SHELRACING

2nd November 2008, 08:11

Presumably this only works with the later model CBT's, not the early ones with points? Cheers.

Actually no, This CDI is to be used in a total loss system designed to be a replacement to the points system. As stated other parts will be needed.

If you are really interested I can give a list of what is required to the buyer. The ability to make parts as well as purchase other parts will be needed.

It's worth the effort as there are considerable power gains to be acheived.

Cheers
Steve

bucketracer

2nd November 2008, 08:34

Cheep?? Suzuki TF125 motor on Trademe. $50 and no reserve. For those old schoolers who love to get carnal with dirty strokers. Any more than 2 shakes and you need a good :spanking:

http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-accessories/Engine-drive-train/auction-185109825.htm

Skunk

2nd November 2008, 14:33

Pumba

3rd November 2008, 19:41

Well we know there is one other here in auckland who wants to buy another

http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-accessories/Frames-bodywork/auction-185733845.htm

WOuld have thought the 200 motor was a bit big though

Slingshot

3rd November 2008, 20:06

Slingshot

3rd November 2008, 20:18

Here's a good deal for you Auckland lot:

<img src="http://images.trademe.co.nz/photoserver/tq/44/79272044.jpg"></img> (http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-accessories/Frames-bodywork/auction-184782528.htm)

Pumba

4th November 2008, 17:17

Here's a good deal for you Auckland lot:

Mine:msn-wink:

Problem is I have now found out it is ganna cost me at least $20 bucks in deasil to pick the damm thing up:doh:

Skunk

4th November 2008, 19:16

Mine:msn-wink:

Problem is I have now found out it is ganna cost me at least $20 bucks in deasil to pick the damm thing up:doh:
It was mine but you outbid me. :waaah:

Slingshot

4th November 2008, 19:26

Mine:msn-wink:

Problem is I have now found out it is ganna cost me at least $20 bucks in deasil to pick the damm thing up:doh:
A $22 swingarm, shock and caliper is still pretty cheap :)

Buckets4Me

4th November 2008, 20:51

you buy it and i will get it and drop it off at the 2 hour
aha
it's closed sorry

Pumba

4th November 2008, 20:55

you buy it and i will get it and drop it off at the 2 hour

Crap, forgot you were out that way as well.

Too late, its happily in my garage with the rest of the crap

Squiggles

4th November 2008, 21:18

The rules for sidecars should allow a bigger motor...there's a fair bit more weight to push around.

Nah, same as F4, so that'll need to be re powered or cut down to bring it into line with the regs. Someone buy it and do it so we'll have some competition :rockon:

Buckets4Me

5th November 2008, 19:21

http://www.trademe.co.nz/Browse/Listing.aspx?id=185560625

bucketracer

6th November 2008, 06:58

Piss off. I'm watching it. :laugh:

Whats this? You claim it, then don't follow through with a bid. Bugger you next time! :2guns: you can get fawked.

Skunk

6th November 2008, 18:17

Whats this? You claim it, then don't follow through with a bid. Bugger you next time! :2guns: you can get fawked.
Hey man - settle down. I've brought it. Geeze, you're a little hot-head ain't ya? If no one bids you can get it cheaper - hence why I said I was watching it.

Are you calm yet? Right, the probelm I have is I couldn't make contact with the seller of find a cheap why of shipping it. So if I can't ship it cheaply I'll offer it to you for the same price I just paid for it. That's how it works, OK?

Skunk

7th November 2008, 07:30

GP125 in Auckland (http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-accessories/Engine-drive-train/auction-186514266.htm) on TradeMe. Needs bearings

Buckets4Me

9th November 2008, 16:30

GP125 in Auckland (http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-accessories/Engine-drive-train/auction-186514266.htm) on TradeMe. Needs bearings

now how dose it go Piss off mate I'm after that :shutup: :shifty:
please lol
dont let me stop you from biding

anyone want wire wheels for there slicks
http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-accessories/Wheels-tyres-brakes/auction-186569455.htm