Mystery lines?

[green machine]

Anyone know about plastic and what would cause these lines to appear overnight???.........for the record they don't want to seem to come off in a hurry..........i'm at a loss to explain it

[AllanB]

That will teach you to take that fat chick in the striped undies for a ride on the front.

[2_SL0]

Ill happily admit my eye sight is crap, but what lines? I'm guessing its going to be real obvious and ill look like a knob.

[green machine]

hahaha........2slo,the lines that run down from top to bottom on an angle are'nt sposed to be there

[noobi]

do thery come off at all thru washing?
is it a sticker or plastic?
has it been left in the sun?

[telliman]

you should draw a tongue on there, it looks like the warriors logo!

[green machine]

do they come off at all thru washing?
is it a sticker or plastic?
has it been left in the sun?

Nah it's weird.....rode in the rain on Sat,tucked it up in the garage till this morning...and bang they jump out at me,it's the factory number board

[noobi]

Nah it's weird.....rode in the rain on Sat,tucked it up in the garage till this morning...and bang they jump out at me,it's the factory number board

strange, it looks like a stretch mark, like its been bent or something?
but from where its centered youd have to be a genius to crash that part into something, otherwise it can do that from heat, but it was raining so dunno really
you probably know all this already

[cave weta]

have a look behind the number board- you will prob find that they correspond with the stiffening ribs on the back. My guess is that the hot sun has somhow caused a release of stresses in the plastic and the pattern has come to the surface

[green machine]

you should draw a tongue on there, it looks like the warriors logo!

Hahaha go the Warriors

[green machine]

have a look behind the number board- you will prob find that they correspond with the stiffening ribs on the back. My guess is that the hot sun has somhow caused a release of stresses in the plastic and the pattern has come to the surface

Got no ribs on the back...........it's a mystery i tells ya:rolleyes:

[2_SL0]

Aaaaaaaaaaaah, as I guessed it was obvious. I agree with Cave Weta. Not that it helps.
On second thoughts, Cave Weta is def wrong, anyone half blind can see its not that.:banana:

(Edited after reading the above post, no one will know and I will look more knowledgeable that Cave Weta)

[CHOPPA]

put some scuff stuff over it, the lines will go away and it will be protected from scatches

[barty5]

if you have had deagreaser on it that can leave shit arse line had it happen to my 426 it had a full black plastics kit on it got some over spray on it which rans and left lines. i found silicone spray on regular worked to get rid of them.

[hayd3n]

its how it has been extruded/ injected depend on type of plastic
you cant get rid of it as its embedded

[theblacksmith]

How bizzare -
Well at least their symmetrical!Looks good.