CB750/4 brakes upgrade?

[crack]

Well been awhile:

Could anyone help me:

I am in the process of installing a dual disk on the CB.

Required is a hinged bracket that bolts onto the fork leg:

Anyone with one, or knowing where I can find one, please let me know.

Play nice, and live life the ton plus.:2thumbsup

Chr's
Crack

[Bonez]

Well been awhile:

Could anyone help me:

I am in the process of installing a dual disk on the CB.

Required is a hinged bracket that bolts onto the fork leg:

Anyone with one, or knowing where I can find one, please let me know.

Play nice, and live life the ton plus.:2thumbsup

Chr's
CrackCB550F both lowers(35mm dia tubes), at least my '76 one does, has the hing bracket on both legs. So an F model 750 lowers may be an option. You can also get one mig welded on(seen this on a few sohc sights). Pesonnally I'd use a matching set of lowers.

This link may be usefull- http://www.salocal.com/sohc/tech/dual_disks/dual_disks.htm

[crack]

BONEZ:

Mate, a huge thankyou, very informative, and very useful.

My model has a bolt on bracket, it is this bracket I am after, other than that I will consider cutting and filing one up from a piece of billet.

Chr's
Crack.:beer::beer:

[Bonez]

Must of been half asleep(just gotten up from a nanna nap) when I read your OP. Nothing unusual for me.
The better bike wreckers should have a few brackets/complete brake arm assys lying about. Econohonda could be worth a shot too. http://www.econohonda.co.nz/